Coreboot Symposium 2008
general: breaks at 10-10:30, 12-1, 3-3:30
|1:00-2:00||Ron Minnich||Opening of the meeting and discussion of the last year|
|2:00-3:00||Stefan Reinauer||Automated Testbed, GSoC 2007, 2008|
|3:30-4:00||Stefan Reinauer||coresystems' various BIOS customers, recent ports and other related work|
|4:00-end||hack session -- set up boards and prioritize the goals of the rest of the time|
|8:30-10:00||Marc Jones (AMD)|| AMD talks about whatever they want :-)
- consumer issues
- what's going on
- new ports this year
|10:30-12:00||Marc Karasek (Sun)||Marc talks about his work at Sun with SimNow|
|1:00-3:00||Ron Minnich|| Ron gives an overview of v3, from the smallest to the large bits.
Sample build/burn session
|3:30-4:00|| open questions (please add some)
1. how do we tell when a board is good enough to move from v2 to v3?
What's the test?
2. What pending issues are there?
|4:00-5:00||Ward Vandewege||The view from the FSF -- what's going on, etc.|
- hack all day. We hope to fix the problems we prioritized Thursday.
What needs to be brought
- power supplies
- video camera
Who is bringing what
Ron: dbe61 and dbe62. Alix 1C. Alix LPC pod. Artec LPC pod. T23 with ubuntu. OLPC devel board for v3 test. (No OLPC, it's too distracting). Outlet strips. FS2 if it arrives from LANL on time (it may not). USB hubs? ISDN card that causes Alix 1.c failure. The new SiS card (if I can find a way to bring a monitor) What else?
Ward: alix2c3, Artec LPC dongle. I can bring an alix.1c too but Ron's already bringing one.
Stefan: Advantech PCM-5820, possibly other boards, Artec LPC Dongle, ByteBlaster II (if it arrives in time), other JTAG cables on Request, Galep-5 Flash Writer, Flash Plaice(?)
Jordan: Norwich, FS2, ROM emulator, monitor, PS/2 keyboard, serial cable, laptop and lots of code.
Current show stopper issues
Alix 1.c lockup if MFGPT are enabled in kernel
Alix 1.c interrupt flood if ISDN card is enabled. (may be related to MFGPT issue)
DBE62 RAM timing is wrong
DBE62 PLL reset gives wrong value on auto setting.
SiS card can't program 2M flash part
Somebody needs to videotape all talks