The wiki is being retired!
Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!
FILO is a bootloader which loads boot images from a local filesystem, without help from legacy BIOS services.
Expected usage is to flash it into the BIOS ROM together with LinuxBIOS.
Download the latest version of FILO from Subversion with
You can also browse the source code online at http://openbios.org/viewvc/trunk/?root=FILO
- Supported boot devices: IDE hard disk, SATA hard disk, CD-ROM, and system memory (ROM)
- Supported filesystems: ext2, fat, jfs, minix, reiserfs, xfs, and iso9660
- Supported image formats: ELF and [b]zImage (a.k.a. /vmlinuz)
- Supports boot disk image of El Torito bootable CD-ROM. "hdc1" means the boot disk image of the CD-ROM at hdc.
- Supports loading image from raw device with user-specified offset
- Console on VGA + keyboard, serial port, or both
- Line editing with ^H, ^W and ^U keys to type arbitrary filename to boot
- Full support for the ELF Boot Proposal (where is it btw, Eric)
- Auxiliary tool to compute checksum of ELF boot images
- Full 32-bit code, no BIOS calls
Only i386 PC architecture is currently supported. Some efforts have been made to get FILO running on PPC. Contact the LinuxBIOS mailinglist for more information.
x86-64 (AMD 64) machines in 32-bit mode also work. (LinuxBIOS uses 32-bit mode and Linux kernel does the transition to 64-bit mode)
Recent version of GNU toolchain is required to build. We have tested with Debian/woody (gcc 2.95.4, binutils 22.214.171.124.1, make 3.79.1), Debian/sid (gcc 3.3.2, binutils 126.96.36.199.6, make 3.80) and different versions of SUSE Linux from 9.0 to 10.0.
First invocation of make creates the default Config file.
Edit this file as you like. It's fairly straightforward (I hope).
$ vi Config
Then running make again will build filo.elf, the ELF boot image of FILO.
Use filo.elf as your payload of LinuxBIOS, or a boot image for Etherboot.
If you enable MULTIBOOT_IMAGE option in Config, you can also boot filo.elf from GNU GRUB or other Multiboot bootloader. This feature is intended for testing or development purpose.
This software was originally developed by SONE Takeshi <email@example.com> and is now maintained by Stefan Reinauer.
FILO on AMD64
Installing LinuxBIOS + Filo (0.4.1) on an AMD64 box.
#define AUTOBOOT_FILE "hda2:/boot/vmlinuz.lb root=/dev/hda2 \ initrd=/boot/initrd.lb console=ttyS0,115200 console=tty0 video=atyfb:1024x768-16" #define AUTOBOOT_DELAY 4 #define IDE_DISK 1 #define VGA_CONSOLE 1 #define PC_KEYBOARD 1 #define SERIAL_CONSOLE 1 #define SERIAL_IOBASE 0x3f8 #define SERIAL_SPEED 115200 #define FSYS_EXT2FS 1 #define FSYS_FAT 1 #define FSYS_JFS 1 #define FSYS_MINIX 1 #define FSYS_REISERFS 1 #define FSYS_XFS 1 #define FSYS_ISO9660 1 #define ELTORITO 1 #define SUPPORT_PCI 1 #define LINUX_LOADER 1 #define PCI_CONFIG_1 1
Installing SuSE 9.0 AMD64 on a Solo-System:
FILO version 0.4.1 (stepan@prokofjieff) Thu Oct 30 13:29:16 CET 2003 Press <Enter> for default boot, or <Esc> for boot prompt... boot: hdc:/boot/loader/linux initrd=/boot/loader/initrd console=ttyS0,115200n8