GRUB2: Difference between revisions

From coreboot
Jump to navigation Jump to search
([FIX] →‎creating the GRUB payload (with a memdisk): Add `terminfo` for `serial` and `scsi` for `ahci`)
Line 85: Line 85:


Then load kernel and initramfs as usual...
Then load kernel and initramfs as usual...
== Trisquel, Ubuntu, Debian ==
We want automatics hooks to sign our kernel so we don't have to do it manually each time...
Generate the key as root(sudo su) like we just explained, but without a password
In debian based distributions you can hook the kernel build to sign the result:
Add the following to /etc/kernel/postinst.d/yy-update-signatures
#! /bin/sh
set -e
version="$1"
gpg --detach-sign /boot/vmlinuz-${version}
gpg --detach-sign /boot/initrd.img-${version}
Then do:
chmod +x /etc/kernel/postinst.d/yy-update-signatures


==== LUKS disks openning ====
==== LUKS disks openning ====

Revision as of 16:16, 29 March 2013

GRUB 2 is a modular, multiboot-capable bootloader for many operating systems that can be used as a payload for coreboot.

Status

GRUB 2 can be launched:

  • Directly by coreboot as a payload
  • Directly by SeaBIOS as a payload
  • By SeaBIOS, on disk, as it would with a normal BIOS.

Recent bzr versions have improved memory management that removes the memory limitations when ran as a payload.

features

Security

signed kernels

GRUB is capable of running only trusted(signed) kernels.

  • it supports only DSA gpg keys

Here's a little howto.

First generate a key:

$ gpg --gen-key
gpg (GnuPG) 2.0.19; Copyright (C) 2012 Free Software Foundation, Inc.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Please select what kind of key you want:
   (1) RSA and RSA (default)
   (2) DSA and Elgamal
   (3) DSA (sign only)
   (4) RSA (sign only)
Your selection? 3
DSA keys may be between 1024 and 3072 bits long.
What keysize do you want? (2048) 3072
Requested keysize is 3072 bits
Please specify how long the key should be valid.
         0 = key does not expire
      <n>  = key expires in n days
      <n>w = key expires in n weeks
      <n>m = key expires in n months
      <n>y = key expires in n years
Key is valid for? (0) 
Key does not expire at all
Is this correct? (y/N) y

GnuPG needs to construct a user ID to identify your key.

Real name: Denis 'GNUtoo' Carikli
Email address: GNUtoo@no-log.org
Comment: Kernel signing key
You selected this USER-ID:
    "Denis 'GNUtoo' Carikli (Kernel signing key) <GNUtoo@no-log.org>"

Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? o
You need a Passphrase to protect your secret key.

We need to generate a lot of random bytes. It is a good idea to perform
some other action (type on the keyboard, move the mouse, utilize the
disks) during the prime generation; this gives the random number
generator a better chance to gain enough entropy.
gpg: WARNING: some OpenPGP programs can't handle a DSA key with this digest 
size
gpg: key C86D4C64 marked as ultimately trusted
public and secret key created and signed.

gpg: checking the trustdb
gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
gpg: depth: 0  valid:   2  signed:   0  trust: 0-, 0q, 0n, 0m, 0f, 2u
pub   3072D/C86D4C64 2013-03-13
      Key fingerprint = 7244 AC33 F9A7 9AE8 30DE  8996 9097 B48D C86D 4C64
uid                  Denis 'GNUtoo' Carikli (Kernel signing key) 
<GNUtoo@no-log.org>

Note that this key cannot be used for encryption.  You may want to use
the command "--edit-key" to generate a subkey for this purpose.

Then sign the kernels and initramfs:

cd /boot
sudo -E gpg --detach-sign vmlinuz-linux-libre-pae
sudo -E gpg --detach-sign initramfs-linux-libre-pae.img
gpg --export  > boot.key

Then you can put the key on the memdisk (advised) or the boot partition for test purposes only. Then in GRUB do (for testing purposes):

trust boot.key
set check_signatures=enforce

to only boot correctly signed kernels and initramfs...

Then load kernel and initramfs as usual...

Trisquel, Ubuntu, Debian

We want automatics hooks to sign our kernel so we don't have to do it manually each time... Generate the key as root(sudo su) like we just explained, but without a password In debian based distributions you can hook the kernel build to sign the result: Add the following to /etc/kernel/postinst.d/yy-update-signatures

#! /bin/sh
set -e

version="$1"

gpg --detach-sign /boot/vmlinuz-${version}
gpg --detach-sign /boot/initrd.img-${version}

Then do:

chmod +x /etc/kernel/postinst.d/yy-update-signatures

LUKS disks openning

GRUB is capable of opening LUKS disks like that:

grub> ls 
(ata2) (ata2,msdos3) (ata2,msdos2) (ata2,msdos1) (usb0) (usb0,msdos1) (ata6) (memdisk)
grub> cryptomount (ata2,msdos3)
Attempting to decrypt master key...
Enter passphrase for ata2,msdos3 (431439b0870f40a3bfe8f3ca3aa7072a):
Slot 0 opened
grub> ls
(crypto0) (ata2) (ata2,msdos3) (ata2,msdos2) (ata2,msdos1) (usb0) (usb0,msdos1) (ata6) (memdisk) 
grub> set root=crypto0
grub> ls /
lost+found/ boot/ var/ dev/ run/ etc/ tmp/ sys/ proc/ usr/ lib/ sbin/ bin/ home/ mnt/ opt/ root/ srv/ media/

Note that you have to type the password and so it's better to have some kind of output (VGA, Serial etc...)

Other features

SeaBIOS launching

GRUB is capable of launching SeaBIOS like that: Add SeaBIOS to the memdisk:

tar uvf ../memdisk.tar ../../seabios/out/bios.bin.elf --transform 's#.*#/bios.bin.elf#'

Then add that to grub.cfg:

menuentry 'SeaBIOS' {
	set root='memdisk'
	echo    'Loading SeaBIOS ...'
	chainloader /bios.bin.elf
}

grub.cfg

Serial

To enable serial, add the following on top of your grub.cfg:

serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1
terminal_input --append  serial
terminal_output --append serial

Compiling

bzr branch http://bzr.savannah.gnu.org/r/grub/trunk/grub
cd grub
./autogen.sh
./configure --with-platform=coreboot
make

creating the GRUB payload (with a memdisk)

cd grub-core
tar cvf ../memdisk.tar serial.mod terminal.mod normal.mod echo.mod ahci.mod all_video.mod ata.mod \
boot.mod cat.mod chain.mod configfile.mod crypto.mod elf.mod ext2.mod extcmd.mod fshelp.mod help.mod \
linux.mod memdisk.mod minicmd.mod multiboot2.mod pata.mod part_msdos.mod gettext.mod terminfo.mod scsi.mod \
--transform 's#^#/boot/grub/i386-coreboot/#'
tar uvf ../memdisk.tar grub.cfg  --transform 's#^#/boot/grub/#'
../grub-mkimage -d . -O i386-coreboot -o ../../grub2.elf memdisk tar ehci ohci uhci at_keyboard usb_keyboard -m ../memdisk.tar
ls -l -h ../../grub2.elf

creating the GRUB payload (without a memdisk)

cd grub-core
modules="serial terminal normal echo ahci all_video ata boot cat chain configfile crypto elf ext2 extcmd fshelp help linux memdisk minicmd multiboot2 pata part_msdos gettext"
../grub-mkimage -d . -O i386-coreboot -o ../../grub2.elf memdisk tar ehci ohci uhci at_keyboard usb_keyboard ${modules}
ls -l -h ../../grub2.elf

creating the GRUB payload (with a memdisk for the config file)

cd grub-core
tar cvf ../memdisk.tar grub.cfg  --transform 's#^#/boot/grub/#'
modules="serial terminal normal echo ahci all_video ata boot cat chain configfile crypto elf ext2 extcmd fshelp help linux memdisk minicmd multiboot2 pata part_msdos gettext"
../grub-mkimage -d . -O i386-coreboot -o ../../grub2.elf memdisk tar ehci ohci uhci at_keyboard usb_keyboard ${modules} -m ../memdisk.tar
ls -l -h ../../grub2.elf

With all modules (possible with last GRUB from bzr) And a memdisk for grub.cfg

cd grub-core
tar cvf ../memdisk.tar grub.cfg  --transform 's#^#/boot/grub/#'
modules="$(ls *.mod | sed 's#.mod$##g')"
../grub-mkimage -d . -O i386-coreboot -o ../../grub2.elf ${modules} -m ../memdisk.tar
ls -l -h ../../grub2.elf

combining with coreboot

As a SeaBIOS payload

build/cbfstool build/coreboot.rom add-payload -n img/grub2 -f grub2.elf -t raw
build/cbfstool build/coreboot.rom print

That way it will be possible to run GRUB as a payload after SeaBIOS: The advantage is that it's less risky. At runtime press F12 and you'll have the GRUB option.

As a Coreboot payload

Advantages: faster, can be used for security

Disadvantages: more risky if you have no way to recover

Howto

In make menuconfig of coreboot, select the path of grub2.elf.

Also make sure you have some kinds of output such as VGA or serial (it needs to be activated in both coreboot and GRUB)