Difference between revisions of "GRUB2"
|Line 1:||Line 1:|
'''[http://grub.enbug.org/ GRUB2]''' is a modular, multiboot-capable bootloader for many operating systems
'''[http://grub.enbug.org/ GRUB2]''' is a modular, multiboot-capable bootloader for many operating systems can be used as a payload for coreboot.
== Status ==
== Status ==
Revision as of 15:33, 5 September 2008
GRUB2 is a modular, multiboot-capable bootloader for many operating systems that can be used as a payload for coreboot.
- A significant amount of work has been put into GRUB2 in our monotone repository, which also provides snapshots.
- The mainline version of GRUB2 has a wiki page on the coreboot port.
How to build GRUB2 as a payload
It's recommended to use a recent snapshot of the allpatches branch in the GRUB2 monotone repository (you can also just download http://coreboot.org/viewmtn/branch/head/tar/org.coreboot.grub2.allpatches - which resolves to the latest revision on that branch; the top level directory in the resulting tarball represents the revision ID, which is a SHA-1 value over revision data, and thus varies wildly).
$ wget http://coreboot.org/viewmtn/revision/tar/edae9d3e3d999c07b2d8a99f04f258586eb79297 -O grub2.tar $ tar xfv grub2.tar $ cd edae9d3e3d999c07b2d8a99f04f258586eb79297 $ sh autogen.sh $ ./configure --with-platform=coreboot --prefix=$PWD/installed $ chmod 755 mkinstalldirs $ make && make install $ $PWD/installed/bin/grub-mkimage -o core.img normal fat iso9660 pc ata memdisk lar ls cat cmp hello help serial terminal test configfile multiboot boot loopback
GRUB2 is a modular system, you can include whichever modules you need into the image.
In addition to the full list of available modules in upstream GRUB2 the coreboot version of GRUB2 also adds a few more custom modules.
We suggest that you use the following modules:
|serial, terminal, terminfo||serial console support|
|coreboot||change to console automatically|
|digest||crypto (incl. signature checking)|
|memdisk, lar or cpio||filesystem in rom|
During development, we used the following list of modules:
coreboot hello cat cmp fat iso9660 help lspci lsusb serial terminal lar terminfo memdisk atadisk ls configfile boot hexdump digest linux multiboot pc
Modules specific to coreboot
The following modules are specific to coreboot, or to the coreboot version of GRUB2:
|atadisk||ATA disk driver based on the OpenBIOS driver|
|coreboot||load serial console information from coreboot table|
|lar||archive format ("filesystem") driver for LAR files (such as coreboot v3 images)|
|lsusb||in the .usb branch, provides an uhci driver and usb storage support. highly experimental at this time|
Building a diskimage
If you are using coreboot v2, the firmware image is not a LAR archive, as in coreboot v3. If you want to place files in the coreboot+grub2 image, you can still create a diskimage and include it in your payload.
- create a lar/cpio/tar file (cpio must be gnu cpio. files created by other cpios might not be compatible)
-m lar/cpio-fileto your grub-mkimage command line
Per default GRUB2 looks for a configuration file grub.cfg in the disk image. The path is
Currently the tools for crypto signature verification are not built automatically. To build them, run
$ cd libs/sigtools $ make
Create a key pair filename.pub and filename.sec with
$ genkeypair filename
Create a signature of candidate using keyfile.sec and save it as candidate.sig:
$ gensig keyfile candidate
Verification in GRUB2
Load /key.pub as public key and block access to all unsigned files with
$ load-pubkey /key.pub
Verify foo using the signature foo.sig, reporting success or failure and grant access to the file foo with:
$ validate /foo /foo.sig
multiboot grub-invaders # fails validate grub-invaders grub-invaders.sig multiboot grub-invaders # this time it succeeds
Hints and Tricks
Loading grub.cfg from disk
It is suggested that grub.cfg is contained in a memdisk/lar image. This grub.cfg can be used to load other configuration files from any mass storage media. If you want to load a grub.cfg from the first device that contains one, your in-flash grub.cfg can look like this:
search -f -s /grub.cfg configfile /grub.cfg
- USB stack integration (in progress).
- See more information in the "Porting GRUB2 to coreboot" milestone in the coreboot issue tracker.
Patrick Georgi has been working on GRUB2 for coreboot during the Google Summer of Code 2007. He made an original code submission on August 20th 2007. If you care, there is documentation on how to use it, but that work is based on a very old version of GRUB2.
For various reasons, Robert Millan of the GRUB project did another original implementation, which got merged, so we moved our effort to their new code base and continued from there.