The wiki is being retired!
Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!
Google Summer of Code 2007
Booting Windows and other Operating Systems in LinuxBIOS
The goal of this sub project is to figure out how to boot Windows Vista/XP/2003. There are three approaches that might proof successful:
- using a dedicated LinuxBIOS loader (ie. adapting ReactOS FREELDR)
- booting Windows on top of Linux using kexec/kboot
- fixing ADLO so that it boots Vista/XP and removing the mainboard dependencies in it's code.
Port Grub2 to work in LinuxBIOS
Grub2 is going to be _the_ bootloader of choice in the forseeable future. As such, it could replace both Grub legacy and FILO, the LinuxBIOS hack for grub compatibility. FILO lacks many features that come with grub2 with no extra effort.
This task splits into four sub-problems:
- Add a target i386-linuxbios, next to i386-pc and i386-efi to the configuration process
- Add an IDE driver that does direct access instead of intXX calls
- Make the build process generate a single static ELF image, like it is done on Sparc
- Add support for reading the memory size from the LinuxBIOS table.
SCSI booting in LinuxBIOS
Currently LinuxBIOS can not boot from an arbitrary SCSI controller. There are two solutions for the problem:
- Use Linux and Kexec. This requires to keep the SCSI driver in the flash chip.
- Use x86emu/vm86/ADLO and the int13 method. This would allow to use the PCI option rom available on all modern SCSI controllers.
So we obviously need a solution based on the later. This could as well be implemented as a Linux program, as an intermediate payload, or as a shared library.
The code you are going to write needs to catch the int13 interrupt vector that the SCSI option rom installs and make it available to arbitrary (firmware/payload) code trying to load something from disk. This
This is a LinuxBIOSv3 project.
CMOS Config / Device Tree Browser Payload
Unlike other BIOSes, Linux has no such thing as a "CMOS setup". This does not mean that you can not configure it. There is a nice and small Linux command line utility called lxbios for that purpose. But people are often asking for a builtin config tool. Such a config tool could feature VGA graphics (maybe even VESA?), it should be easy to use, allow to browse information from LinuxBIOS' central structure: the device tree, and provide lxbios functionality with some sex appeal.
This is a LinuxBIOSv3 project.
LinuxBIOS graphical port creator
In LinuxBIOSv2, every port to a new mainboard requires that you touch a lot of source files with only minimal changes. In version 3 we try to fix this issue and pack all mainboard specific information into a configuration file that we call the Device Tree Source (DTS). This Device Tree config file is a simple text file describing what static (non-detectable and/or soldered on) devices are used on the mainbard and how they are wired (SPD-ROM, Interrupt Routing, SuperIO, Northbridge, Southbridge, Hypertransport,..). It is mostly organized as a tree (with some special cases, Hypertransport allows cycles for instance)
The idea is to create a tool, based on the [www.eclipse.org/ Eclipse IDE], Swing, or your favourite portable toolkit, which allows you to drag and drop those components together and describe how they are wired.
This would be a great help for mainboard vendors that build mainboards of already supported components. No more reading of LinuxBIOS code would be required, but rather only the understanding of the hardware, and probably the mainboard schematics.
This is a LinuxBIOSv3 project. It requires good Java and/or Eclipse skills (or whatever toolkit/language you choose)
Open Firmware payload for LinuxBIOS
Mitch Bradley from Firmworks, Inc. released the Open Firmware sources under a BSD license. The released code does work in LinuxBIOS, but could use some proper integration and testing on some hardware or in Qemu.
This project might benefit from some Forth skills, but I don't think they are required.
GNUFI or TianoCore payloads
This project requires no hardware skills, but especially in case of TianoCore might require knowledge of Windows compilers (VC2005?)
Your own Projects
We've listed some ideas for projects here, but we're more than happy to entertain other ideas if you've got any. Feel free to contact us under the address below, and don't hesitate to suggest whatever you have in mind.
Summer of Code 2007 Application
Please complete the standard Google SoC 2007 application. Additionally, please provide information on the following:
- Who are you? What are you studying?
- Why are you the right person for this task?
- Do you have any other commitments that we should know about?
- List your C, Assembler or Java experience. (Depending on the project)
- List your history with open source projects.
- What is your preferred method of contact? (Phone, email, Skype, etc)
Feel free to keep your application short. A 15 page essay is no better than a 2 page summary. If you wish to write 15 pages, you are of course welcome to do so, and we will gladly put your paper up on the web page. But it is not required for the application.
The Drupal project has a great page on How to write an SOC application.
If you are interested in becoming a GSoC student, please contact Stefan Reinauer.
There is also an IRC channel on irc.freenode.net: #LinuxBIOS (actually a forwarder to #OpenBIOS because it is the same folks hanging out there.)