Preparing your computer for coreboot

From coreboot
Revision as of 20:42, 23 June 2013 by GNUtoo (talk | contribs) (→‎Steps)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!

Introduction

In order to easier coreboot debugging(really usefull when something goes wrong) you should consider making your computer coreboot-ready before installing coreboot.

Steps

Output for production

Serial port

If you have a serial port, you should consider Enabling the Serial Console in:

  • Coreboot
  • The payload(if you use Seabios from coreboot's "make menuconfig" it's already done for you)
  • The bootloader like grub
  • The kernel(like the linux kernel)
  • The init system(systemd, sysvinit etc...)

dbgp

if you don't have a serial port you could enable the USB debug port in coreboot and grub. However in my GNU/Linux disribution(Parabola, based on arch) they didn't enable it for the linux(-libre) kernel.

Initramfs