From coreboot
Revision as of 18:32, 9 April 2008 by Kenji (talk | contribs)
Jump to: navigation, search

This page describes how to use the TeleVideo TC7020 thin client with coreboot.




TeleVideo TC7020 thin client.
The backpanel.
The mainboard.


  • GX1 Cyrix/National/AMD CPU with 300MHz core clock
  • CS5530A-UCE part of the chipset, Cyrix/National/AMD companion device
  • PC97317 Super I/O
  • DP83815 National Semiconductor network controller
  • LM4546 National, AC97 AD/DA



  • 1x PS/2 keyboard
  • 1x PS/2 mouse
  • 2x serial port (COM1, COM2)
  • 1x parallel port
  • 2x USB (OHCI)
  • 1x DSUB15 VGA analogue
  • 1x RJ45
  • Audio: stereo line-out, mic


  • 1x 44pin 2mm 2.5" HDD connector with a detachable CompactFlash adapter
  • 1x PC133 DIMM slot
  • 1x MiniPCI slot

lspci -tvnn

-[0000:00]-+-00.0  Cyrix Corporation PCI Master [1078:0001]
           +-12.0  Cyrix Corporation 5530 Legacy [Kahlua] [1078:0100]
           +-12.1  Cyrix Corporation 5530 SMI [Kahlua] [1078:0101]
           +-12.2  Cyrix Corporation 5530 IDE [Kahlua] [1078:0102]
           +-12.3  Cyrix Corporation 5530 Audio [Kahlua] [1078:0103]
           +-12.4  Cyrix Corporation 5530 Video [Kahlua] [1078:0104]
           +-13.0  Compaq Computer Corporation ZFMicro Chipset USB [0e11:a0f8]
           \-15.0  National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]

Building a coreboot image

First, build a payload (e.g. FILO) and copy it to /tmp/filo.elf. Then:

$ cd targets
$ ./buildtarget televideo/tc7020
$ cd televideo/tc7020/tc7020
$ LANG=C make

Further information

Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.