[coreboot-gerrit] New patch to review for coreboot: 916c0cc superiotool: add CR dump for W83627UHG = NCT6627UD
Frank Rysanek (Frantisek.Rysanek@post.cz)
gerrit at coreboot.org
Fri Apr 5 10:48:32 CEST 2013
Frank Rysanek (Frantisek.Rysanek at post.cz) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3027
-gerrit
commit 916c0cc6a4448a81cb513fb6a630ae842c0def06
Author: Frank Rysanek <Frantisek.Rysanek at post.cz>
Date: Fri Apr 5 10:44:10 2013 +0200
superiotool: add CR dump for W83627UHG = NCT6627UD
This commit adds "register dump capability" to
superiotool for a specific chip by Winbond/Nuvoton:
the W83627UHG AKA NCT6627UD (same chip, different package).
In other words, it fills in the "CR map" definitions in winbond.c,
which so far have been void for this chip.
Change-Id: I834f8767b29f3148f353004edb22cfd7db5ddd56
Signed-off-by: Frank Rysanek <Frantisek.Rysanek at post.cz>
---
util/superiotool/winbond.c | 66 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 1 deletion(-)
diff --git a/util/superiotool/winbond.c b/util/superiotool/winbond.c
index 96b082e..aca6b57 100644
--- a/util/superiotool/winbond.c
+++ b/util/superiotool/winbond.c
@@ -233,7 +233,71 @@ static const struct superio_registers reg_table[] = {
{0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00,
EOT}},
{EOT}}},
- {0xa23, "W83627UHG", {/* TODO: Not yet in sensors-detect */
+ {0xa23, "W83627UHG = NCT6627UD", { /* TODO: Not yet in sensors-detect */
+ {NOLDN, NULL, /* CR2B (485) is only valid for chip rev.E */
+ {0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
+ 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+ {0x00,0xa2,NANA,0xff,0xF0,MISC,0x00,MISC,RSVD,0x00,
+ 0x00,0x00,0x00,0x02,0x00,0x00,0x00,EOT}},
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+ EOT},
+ {0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00,
+ EOT}},
+ {0x1, "Parallel port",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+ {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+ {0x2, "UART A",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xf8,0x04,0x00,EOT}},
+ {0x3, "UART B",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+ {0x5, "Keyboard",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+ {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
+ {0x6, "UART C",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xE0,0x04,0x00,EOT}},
+ {0x7, "GPIO 3, GPIO 4",
+ {0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,EOT},
+ {0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,EOT}},
+ {0x8, "WDTO#, PLED, GPIO 5,6 & GPIO Base Address",
+ {0x30,0x60,0x61,
+ 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,
+ 0xF5,0xF6,0xF7,EOT},
+ {0x02,0x00,0x00,
+ 0xFF,0x00,0x00,0x00,0xFF,0x1F,0x00,0x00,
+ 0x00,0x00,0x00,EOT}},
+ {0x9, "GPIO 1, GPIO 2 and SUSLED",
+ {0x30,
+ 0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+ 0xF3,EOT},
+ {0x00,
+ 0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,
+ 0x00,EOT}},
+ {0xa, "ACPI",
+ {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+ 0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT},
+ {0x00,0x00,0x01,0x00,0xff,0x08,0x00,0x00,0x1c,0x00,
+ RSVD,RSVD,0x3e,0x00,0x00,0x00,0x00,0x00,EOT}},
+ {0xb, "Hardware monitor",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
+ {0x00,0x00,0x00,0x00,RSVD,RSVD,0x00,EOT}},
+ {0xc, "PECI, SST",
+ {0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
+ 0xf1,0xf2,0xf3,0xfe,0xff,EOT},
+ {0x00,0x48,0x48,0x48,0x48,0x00,RSVD,RSVD,0x00,
+ 0x48,0x50,0x10,0x23,0x5A,EOT}},
+ {0xD, "UART D",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x00,0x02,0xe0,0x03,0x00,EOT}},
+ {0xE, "UART E",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x00,0x03,0xe8,0x04,0x00,EOT}},
+ {0xF, "UART F",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x00,0x02,0xe8,0x03,0x00,EOT}},
{EOT}}},
{0xa51, "W83667HG", {
/* See also: http://lists.lm-sensors.org/pipermail/lm-sensors/2008-July/023683.html */
More information about the coreboot-gerrit
mailing list