[coreboot-gerrit] Patch set updated for coreboot: 1813275 Intel 82801Gx: LPC: Unify I/O APIC setup
Paul Menzel (paulepanter@users.sourceforge.net)
gerrit at coreboot.org
Tue May 7 17:37:38 CEST 2013
Paul Menzel (paulepanter at users.sourceforge.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3181
-gerrit
commit 1813275f6474f5f0ac94bdae79e02f5550c410ad
Author: Paul Menzel <paulepanter at users.sourceforge.net>
Date: Tue Apr 23 14:40:23 2013 +0200
Intel 82801Gx: LPC: Unify I/O APIC setup
Remove local copies of reading and writing I/O APIC registers by
using already available functions.
This change is similar to
commit db4f875a412e6c41f48a86a79b72465f6cd81635
Author: Kyösti Mälkki <kyosti.malkki at gmail.com>
Date: Tue Jan 31 17:24:12 2012 +0200
IOAPIC: Divide setup_ioapic() in two parts.
Reviewed-on: http://review.coreboot.org/300
and
commit e614353194c712a40aa8444a530b2062876eabe3
Author: Kyösti Mälkki <kyosti.malkki at gmail.com>
Date: Tue Feb 26 17:24:41 2013 +0200
Unify setting 82801a/b/c/d IOAPIC ID
Reviewed-on: http://review.coreboot.org/2532
and uses `io_apic_read()` and `io_apic_write()` too.
As commented by Aaron Durbin, a separate `i82801gx_enable_acpi()` is
not needed: “The existing code path *in this file* is about enabling
the io apic.” [1].
[1] http://review.coreboot.org/#/c/3182/4/src/southbridge/intel/lynxpoint/lpc.c
Change-Id: I104a2d9c2898da14d26f8f2992d5a065ad640356
Signed-off-by: Paul Menzel <paulepanter at users.sourceforge.net>
---
src/southbridge/intel/i82801gx/lpc.c | 42 ++++++++++++------------------------
1 file changed, 14 insertions(+), 28 deletions(-)
diff --git a/src/southbridge/intel/i82801gx/lpc.c b/src/southbridge/intel/i82801gx/lpc.c
index 777a6d7..9285080 100644
--- a/src/southbridge/intel/i82801gx/lpc.c
+++ b/src/southbridge/intel/i82801gx/lpc.c
@@ -39,37 +39,23 @@
typedef struct southbridge_intel_i82801gx_config config_t;
-static void i82801gx_enable_apic(struct device *dev)
+/**
+ * Set miscellanous static southbridge features.
+ *
+ * @param dev PCI device with I/O APIC control registers
+ */
+static void i82801gx_enable_ioapic(struct device *dev)
{
- int i;
- u32 reg32;
- volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
- volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
-
- /* Enable ACPI I/O and power management.
- * Set SCI IRQ to IRQ9
- */
+ /* Enable ACPI I/O range decode */
pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
- *ioapic_index = 0;
- *ioapic_data = (2 << 24);
-
- *ioapic_index = 0;
- reg32 = *ioapic_data;
- printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
- if (reg32 != (2 << 24))
- die("APIC Error\n");
-
- printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
- for (i=0; i<3; i++) {
- *ioapic_index = i;
- printk(BIOS_SPEW, " reg 0x%04x:", i);
- reg32 = *ioapic_data;
- printk(BIOS_SPEW, " 0x%08x\n", reg32);
- }
+ set_ioapic_id(IO_APIC_ADDR, 0x02);
- *ioapic_index = 3; /* Select Boot Configuration register. */
- *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
+ /*
+ * Select Boot Configuration register (0x03) and
+ * use Processor System Bus (0x01) to deliver interrupts.
+ */
+ io_apic_write(IO_APIC_ADDR, 0x03, 0x01);
}
static void i82801gx_enable_serial_irqs(struct device *dev)
@@ -422,7 +408,7 @@ static void lpc_init(struct device *dev)
pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
- i82801gx_enable_apic(dev);
+ i82801gx_enable_ioapic(dev);
i82801gx_enable_serial_irqs(dev);
More information about the coreboot-gerrit
mailing list