[coreboot-gerrit] Patch set updated for coreboot: 464d956 superio/ite/it8721f: Rewrite sio from hardcoded base addr

Edward O'Callaghan (eocallaghan@alterapraxis.com) gerrit at coreboot.org
Mon Apr 21 09:22:27 CEST 2014


Edward O'Callaghan (eocallaghan at alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5560

-gerrit

commit 464d956c3f959953916816b67b99954304760d25
Author: Edward O'Callaghan <eocallaghan at alterapraxis.com>
Date:   Mon Apr 21 17:10:00 2014 +1000

    superio/ite/it8721f: Rewrite sio from hardcoded base addr
    
    I'll wait for Pauls insight
    
    Change-Id: I52211cfb833af53efd8e00fd2a634808c0a92915
    Signed-off-by: Edward O'Callaghan <eocallaghan at alterapraxis.com>
---
 src/mainboard/asus/m5a88-v/romstage.c  |  2 +-
 src/superio/ite/it8721f/Makefile.inc   |  2 +-
 src/superio/ite/it8721f/early_serial.c | 60 +++++++++++++---------------------
 src/superio/ite/it8721f/it8721f.h      | 11 +++----
 4 files changed, 28 insertions(+), 47 deletions(-)

diff --git a/src/mainboard/asus/m5a88-v/romstage.c b/src/mainboard/asus/m5a88-v/romstage.c
index db8b7b5..94a1e4e 100644
--- a/src/mainboard/asus/m5a88-v/romstage.c
+++ b/src/mainboard/asus/m5a88-v/romstage.c
@@ -41,7 +41,7 @@
 #include "northbridge/amd/amdfam10/reset_test.c"
 #include <console/loglevel.h>
 #include "cpu/x86/bist.h"
-#include "superio/ite/it8721f/early_serial.c"
+#include <superio/ite/it8721f/it8721f.h>
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
diff --git a/src/superio/ite/it8721f/Makefile.inc b/src/superio/ite/it8721f/Makefile.inc
index 712d020..ef616f4 100644
--- a/src/superio/ite/it8721f/Makefile.inc
+++ b/src/superio/ite/it8721f/Makefile.inc
@@ -18,5 +18,5 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 ##
 
+romstage-$(CONFIG_SUPERIO_ITE_IT8721F) += early_serial.c
 ramstage-$(CONFIG_SUPERIO_ITE_IT8721F) += superio.c
-
diff --git a/src/superio/ite/it8721f/early_serial.c b/src/superio/ite/it8721f/early_serial.c
index 20e19b6..86f3c2c 100644
--- a/src/superio/ite/it8721f/early_serial.c
+++ b/src/superio/ite/it8721f/early_serial.c
@@ -20,30 +20,24 @@
  */
 
 #include <arch/io.h>
+#include <device/pnp.h>
 #include "it8721f.h"
 
-/* The base address is 0x2e or 0x4e, depending on config bytes. */
-#define SIO_BASE                     0x2e
-#define SIO_INDEX                    SIO_BASE
-#define SIO_DATA                     (SIO_BASE + 1)
-
 /* Global configuration registers. */
 #define IT8721F_CONFIG_REG_CC        0x02 /* Configure Control (write-only). */
 #define IT8721F_CONFIG_REG_LDN       0x07 /* Logical Device Number. */
 #define IT8721F_CONFIG_REG_CLOCKSEL  0x23 /* Clock Selection. */
 #define IT8721F_CONFIG_REG_SWSUSP    0x24 /* Software Suspend, Flash I/F. */
 
-static void it8721f_sio_write(u8 ldn, u8 index, u8 value)
+static void it8721f_sio_write(device_t dev, u8 index, u8 value)
 {
-	outb(IT8721F_CONFIG_REG_LDN, SIO_BASE);
-	outb(ldn, SIO_DATA);
-	outb(index, SIO_BASE);
-	outb(value, SIO_DATA);
+	pnp_set_logical_device(dev);
+	pnp_write_config(dev, index, value);
 }
 
-static void it8721f_enter_conf(void)
+static void it8721f_enter_conf(device_t dev)
 {
-	u16 port = 0x2e; /* TODO: Don't hardcode! */
+	u16 port = dev >> 8;
 
 	outb(0x87, port);
 	outb(0x01, port);
@@ -54,40 +48,30 @@ static void it8721f_enter_conf(void)
 static void it8721f_exit_conf(void)
 {
 	it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CC, 0x02);
+	it8721f_sio_write(dev, IT8721F_CONFIG_REG_CC, 0x02);
+}
+
+static void it8721f_reg_write(device_t dev, u8 index, u8 value)
+{
+	it8721f_enter_conf(dev);
+	it8721f_sio_write(dev, index, value);
+	it8721f_exit_conf(dev);
 }
 
 /* Select 24MHz CLKIN (48MHz default). */
-void it8721f_24mhz_clkin(void)
+void it8721f_24mhz_clkin(device_t dev)
 {
-	it8721f_enter_conf();
-	it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CLOCKSEL, 0x1);
-	it8721f_exit_conf();
+	it8721f_reg_write(dev, IT8721F_CONFIG_REG_CLOCKSEL, 0x1);
 }
 
 
 /* Enable the serial port(s). */
 void it8721f_enable_serial(device_t dev, u16 iobase)
 {
-	/* (1) Enter the configuration state (MB PnP mode). */
-	it8721f_enter_conf();
-
-	/* (2) Modify the data of configuration registers. */
-
-	/*
-	 * Select the chip to configure (if there's more than one).
-	 * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
-	 * If this register is not written, both chips are configured.
-	 */
-
-	/* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */
-
-	/* Enable serial port(s). */
-	it8721f_sio_write(IT8721F_SP1, 0x30, 0x1); /* Serial port 1 */
-	it8721f_sio_write(IT8721F_SP2, 0x30, 0x1); /* Serial port 2 */
-
-	/* Clear software suspend mode (clear bit 0). TODO: Needed? */
-	/* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */
-
-	/* (3) Exit the configuration state (MB PnP mode). */
-	it8721f_exit_conf();
+	it8721f_enter_conf(dev);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+	pnp_set_enable(dev, 1);
+	it8721f_exit_conf(dev);
 }
diff --git a/src/superio/ite/it8721f/it8721f.h b/src/superio/ite/it8721f/it8721f.h
index 25300e6..1706449 100644
--- a/src/superio/ite/it8721f/it8721f.h
+++ b/src/superio/ite/it8721f/it8721f.h
@@ -19,8 +19,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#ifndef SUPERIO_ITE_IT8721F_IT8721F_H
-#define SUPERIO_ITE_IT8721F_IT8721F_H
+#ifndef SUPERIO_ITE_IT8721F_H
+#define SUPERIO_ITE_IT8721F_H
 
 #define IT8721F_FDC  0x00 /* Floppy */
 #define IT8721F_SP1  0x01 /* Com1 */
@@ -32,10 +32,7 @@
 #define IT8721F_GPIO 0x07 /* GPIO */
 #define IT8721F_IR   0x0a /* Consumer IR */
 
-#if defined(__PRE_RAM__)
-void it8721f_24mhz_clkin(void);
-void it8721f_disable_reboot(void);
+void it8721f_24mhz_clkin(device_t dev);
 void it8721f_enable_serial(device_t dev, u16 iobase);
-#endif
 
-#endif
+#endif /* SUPERIO_ITE_IT8721F_H */



More information about the coreboot-gerrit mailing list