[coreboot-gerrit] Patch set updated for coreboot: f082fee i945/early_init Add FSB 800MHz and fix Bit 49 of CAPID0

[HAOUAS Elyes (ehaouas@noos.fr)]

HAOUAS Elyes (ehaouas at noos.fr) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6794

-gerrit

commit f082fee4730654328a4ae8e5df7c09c367b71c14
Author: Elyes HAOUAS <ehaouas at noos.fr>
Date:   Thu Aug 28 19:42:29 2014 +0200

    i945/early_init Add FSB 800MHz and fix Bit 49 of CAPID0
    
    device 0:0f.0 do not exit.
    the CAPID0 is for D0:F0 , see datasheet mobile-945-express-chipset-datasheet.pdf page 109.
    
    Change-Id: Ia0909866e2c8dd30b7f532ff184728bbdaf07b2f
    Signed-off-by: Elyes HAOUAS <ehaouas at noos.fr>
---
 src/northbridge/intel/i945/early_init.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c
index 08ce10b..5424899 100644
--- a/src/northbridge/intel/i945/early_init.c
+++ b/src/northbridge/intel/i945/early_init.c
@@ -131,6 +131,10 @@ static void i945_detect_chipset(void)
 	case 0:
 		printk(BIOS_DEBUG, "up to DDR2-667");
 		break;
+	case 2: /* 945G/945GZ/945GC/945P/945PL */
+		printk(BIOS_DEBUG, "up to DDR2-667");
+		break;
+
 	case 3:
 		printk(BIOS_DEBUG, "up to DDR2-533");
 		break;
@@ -194,7 +198,7 @@ static void i945_setup_bars(void)
 
 	/* Wait for MCH BAR to come up */
 	printk(BIOS_DEBUG, "Waiting for MCHBAR to come up...");
-	if ((pci_read_config8(PCI_DEV(0, 0x0f, 0), 0xe6) & 0x2) == 0x00) { /* Bit 49 of CAPID0 */
+	if ((pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe6) & 0x2) == 0x00) { /* Bit 49 of CAPID0 */
 		do {
 			reg8 = *(volatile u8 *)0xfed40000;
 		} while (!(reg8 & 0x80));
@@ -226,6 +230,8 @@ static void i945_setup_egress_port(void)
 	reg32 &= 0xffffff00;
 	if ((MCHBAR32(CLKCFG) & 7) == 1)
 		reg32 |= 0x0d;	/* 533MHz */
+	if ((MCHBAR32(CLKCFG) & 7) == 2)
+		reg32 = 0x00000014; /* 800MHz */
 	if ((MCHBAR32(CLKCFG) & 7) == 3)
 		reg32 |= 0x10;	/* 667MHz */
 	EPBAR32(0x2c) = reg32;
@@ -242,6 +248,11 @@ static void i945_setup_egress_port(void)
 		EPBAR32(EPVC1IST + 4) = 0x009c009c;
 	}
 
+	if ((MCHBAR32(CLKCFG) & 7) == 2) {      /* 800MHz */
+                EPBAR32(EPVC1IST + 0) = 0x00f000f0;
+                EPBAR32(EPVC1IST + 4) = 0x00f000f0;
+	}
+
 	if ((MCHBAR32(CLKCFG) & 7) == 3) {	/* 667MHz */
 		EPBAR32(EPVC1IST + 0) = 0x00c000c0;
 		EPBAR32(EPVC1IST + 4) = 0x00c000c0;