[coreboot-gerrit] Patch set updated for coreboot: 9f64429 gizmosphere/gizmo2: Changes to make it gizmo2
Dave Frodin (dave.frodin@se-eng.com)
gerrit at coreboot.org
Tue Dec 9 00:06:18 CET 2014
Dave Frodin (dave.frodin at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7722
-gerrit
commit 9f64429295bc898b1fe8ddcc9e3e434ec6b56a93
Author: Dave Frodin <dave.frodin at se-eng.com>
Date: Fri Nov 21 14:57:03 2014 -0700
gizmosphere/gizmo2: Changes to make it gizmo2
The preceding patch copied gizmo2 from the amd/olivehill
board. This commit includes the changes required to make
the code reflect the gizmo2 hardware:
- Update the vendor Kconfig to add gizmo2
- Update the mainboard Kconfig
- Update devicetree
- Add support in for the soldered down DDR3
- Update the CODEC verb data
- Update the graphics connector settings
- Adjust the temperature thresholds for the fan
What's missing:
- Interrupt routing tables
Gizmo2 can boot DOS and Ubuntu 14.10.
Change-Id: I3d7202957c082974689f2a8c04d8cd33dbdc1a89
Signed-off-by: Dave Frodin <dave.frodin at se-eng.com>
---
src/mainboard/gizmosphere/Kconfig | 4 +
src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c | 38 ++--
src/mainboard/gizmosphere/gizmo2/Kconfig | 14 +-
src/mainboard/gizmosphere/gizmo2/Makefile.inc | 21 ++
.../gizmo2/Micron_MT41J128M16JT.spd.hex | 235 +++++++++++++++++++++
src/mainboard/gizmosphere/gizmo2/PlatformGnbPcie.c | 12 +-
src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl | 2 +-
src/mainboard/gizmosphere/gizmo2/buildOpts.c | 17 +-
src/mainboard/gizmosphere/gizmo2/devicetree.cb | 26 +--
9 files changed, 308 insertions(+), 61 deletions(-)
diff --git a/src/mainboard/gizmosphere/Kconfig b/src/mainboard/gizmosphere/Kconfig
index a9a4eae..715da8f 100644
--- a/src/mainboard/gizmosphere/Kconfig
+++ b/src/mainboard/gizmosphere/Kconfig
@@ -25,9 +25,13 @@ choice
config BOARD_GIZMOSPHERE_GIZMO
bool "Gizmo"
+config BOARD_GIZMOSPHERE_GIZMO2
+ bool "Gizmo2"
+
endchoice
source "src/mainboard/gizmosphere/gizmo/Kconfig"
+source "src/mainboard/gizmosphere/gizmo2/Kconfig"
config MAINBOARD_VENDOR
string
diff --git a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
index 97f8769..44273ab 100644
--- a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
+++ b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
@@ -38,7 +38,7 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
{AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
{AGESA_DO_RESET, agesa_Reset },
- {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_READ_SPD, agesa_ReadSpd_from_cbfs },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
@@ -50,29 +50,29 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/**
- * AMD Olivehill Platform ALC272 Verb Table
+ * ALC272 Verb Table
*/
-static const CODEC_ENTRY Olivehill_Alc272_VerbTbl[] = {
+const CODEC_ENTRY Alc272_VerbTbl[] = {
{0x11, 0x411111F0}, // - SPDIF_OUT2
{0x12, 0x411111F0}, // - DMIC_1/2
{0x13, 0x411111F0}, // - DMIC_3/4
{0x14, 0x411111F0}, // Port D - LOUT1
- {0x15, 0x411111F0}, // Port A - LOUT2
+ {0x15, 0x01011050}, // Port A - LOUT2 Explorer 2x DAC
{0x16, 0x411111F0}, //
{0x17, 0x411111F0}, // Port H - MONO
- {0x18, 0x01a19840}, // Port B - MIC1
+ {0x18, 0x01a11840}, // Port B - MIC1
{0x19, 0x411111F0}, // Port F - MIC2
- {0x1a, 0x01813030}, // Port C - LINE1
- {0x1b, 0x411111F0}, // Port E - LINE2
+ {0x1a, 0x01811030}, // Port C - LINE1
+ {0x1b, 0x01811020}, // Port E - LINE2 Explorer 2x ADC
{0x1d, 0x40130605}, // - PCBEEP
- {0x1e, 0x01441120}, // - SPDIF_OUT1
- {0x21, 0x01214010}, // Port I - HPOUT
+ {0x1e, 0x411111F0}, // - SPDIF_OUT1
+ {0x21, 0x01211010}, // Port I - HPOUT
{0xff, 0xffffffff}
};
-static const CODEC_TBL_LIST OlivehillCodecTableList[] =
+static const CODEC_TBL_LIST CodecTableList[] =
{
- {0x10ec0272, (CODEC_ENTRY*)&Olivehill_Alc272_VerbTbl[0]},
+ {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
};
@@ -108,7 +108,7 @@ static const CODEC_TBL_LIST OlivehillCodecTableList[] =
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
-/* Olivehill Hardware Monitor Fan Control
+/* Hardware Monitor Fan Control
* Hardware limitation:
* HWM failed to read the input temperture vi I2C,
* if other software switch the I2C switch by mistake or intention.
@@ -146,9 +146,9 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
/* IMC Fan Policy temperature thresholds */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
@@ -160,9 +160,9 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
/* IMC Fan Policy PWM Settings */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
@@ -206,7 +206,7 @@ static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
/* Azalia Controller OEM Codec Table Pointer */
- FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&OlivehillCodecTableList[0]);
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
/* Azalia Controller Front Panel OEM Table Pointer */
/* Fan Control */
diff --git a/src/mainboard/gizmosphere/gizmo2/Kconfig b/src/mainboard/gizmosphere/gizmo2/Kconfig
index ea97550..9ee3d38 100644
--- a/src/mainboard/gizmosphere/gizmo2/Kconfig
+++ b/src/mainboard/gizmosphere/gizmo2/Kconfig
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2013-2014 Sage Electronic Engineering
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,7 +18,7 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
-if BOARD_AMD_OLIVEHILL
+if BOARD_GIZMOSPHERE_GIZMO2
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
@@ -31,14 +32,15 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_ACPI_TABLES
select BOARD_ROMSIZE_KB_4096
select GFXUMA
+ select SPD_CACHE
config MAINBOARD_DIR
string
- default amd/olivehill
+ default gizmosphere/gizmo2
config MAINBOARD_PART_NUMBER
string
- default "DB-FT3"
+ default "Gizmo2"
config HW_MEM_HOLE_SIZEK
hex
@@ -56,10 +58,6 @@ config IRQ_SLOT_COUNT
int
default 11
-config ACPI_SSDTX_NUM
- int
- default 0
-
config ONBOARD_VGA_IS_PRIMARY
bool
default y
@@ -68,4 +66,4 @@ config HUDSON_LEGACY_FREE
bool
default y
-endif # BOARD_AMD_OLIVEHILL
+endif # BOARD_GIZMOSPHERE_GIZMO2
diff --git a/src/mainboard/gizmosphere/gizmo2/Makefile.inc b/src/mainboard/gizmosphere/gizmo2/Makefile.inc
index ab1febc..4d521ac 100644
--- a/src/mainboard/gizmosphere/gizmo2/Makefile.inc
+++ b/src/mainboard/gizmosphere/gizmo2/Makefile.inc
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Sage Electronic Engineering, LLC
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -24,3 +25,23 @@ romstage-y += PlatformGnbPcie.c
ramstage-y += buildOpts.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = Micron_MT41J128M16JT
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do echo -e -n "\\x$$c"; \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := 0xab
diff --git a/src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex b/src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex
new file mode 100644
index 0000000..dd65d16
--- /dev/null
+++ b/src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex
@@ -0,0 +1,235 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+# Gizmo2 has 1GB using 4 Micron_MT41J128M16JT-125 chips
+# The datasheet is available at:
+# http://download.micron.com/pdf/datasheets/dram/ddr3/2Gb_DDR3_SDRAM.pdf
+
+# SPD contents for Gizmo2 2GB DDR3 (1600MHz PC3-12800) soldered down
+
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+# 1 SPD Revision -
+# 0x10 = Revision 1.0
+10
+
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+03
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 2 = 14 Row Address Bits
+# bits[7:6]: reserved
+11
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 2 = 16 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+02
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 0 = 0 bits (no bus width extension)
+# bits[7:5]: reserved
+03
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x02 divisor
+# bits[7:4]: 0x05 dividend
+# 5/2 = 2.5ps
+52
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns - used for clock freq of 400 through 1066 MHz
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
+0A
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# Cas Latencies of 11 - 5 are supported
+FE 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x6E = 13.75ns - DDR3-1600K
+6E
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x6E = 13.75ns - DDR3-1600K
+6E
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x3C = 7.5ns
+3C
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x6E = 13.75ns - DDR3-1600K
+6E
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x118 = 35ns - DDR3-1600 (see byte 21)
+18
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x186 = 48.75ns - DDR3-1600K
+86
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x500 = 160ns - for 2 Gigabit chips
+00 05
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x0140 = 40ns - DDR3-1600, 2 KB page size
+01 40
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 1 = DLL Off mode supported
+83
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 1 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+05
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 0 = Signal Loading not specified
+# bits[3:2]: reserved
+# bits[6:4]: 0 = Die count not specified
+# bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+00
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+00
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x0001 = AMD
+00 01
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x13 = 2013
+00 13
+
+# 121 Module ID: Module Manufacture week
+# 0x12 = 12th week
+12
+
+# 122 - 125: Module Serial Number
+53 41 47 45
+
+# 126 - 127: Cyclical Redundancy Code
+00 00
diff --git a/src/mainboard/gizmosphere/gizmo2/PlatformGnbPcie.c b/src/mainboard/gizmosphere/gizmo2/PlatformGnbPcie.c
index 903d1bb..2af30e8 100644
--- a/src/mainboard/gizmosphere/gizmo2/PlatformGnbPcie.c
+++ b/src/mainboard/gizmosphere/gizmo2/PlatformGnbPcie.c
@@ -84,20 +84,14 @@ static const PCIe_DDI_DESCRIPTOR DdiList [] = {
{
0,
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
- PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1)
},
- /* DP1 to FCH */
+ /* DP1 to high-speed edge connector */
{
- 0,
+ DESCRIPTOR_TERMINATE_LIST,
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
},
- /* DP2 to HDMI1/DP */
- {
- DESCRIPTOR_TERMINATE_LIST,
- PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19),
- PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3)
- },
};
static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl b/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl
index e0a9143..4d9af01 100644
--- a/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl
+++ b/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl
@@ -41,7 +41,7 @@ Name(UOM9, 6)
/* USB Overcurrent GPEs */
-#if 0 /* TODO: Update for Olivehill */
+#if 0 /* TODO: Update */
Method(UCOC, 0) {
Sleep(20)
Store(0x13,CMTI)
diff --git a/src/mainboard/gizmosphere/gizmo2/buildOpts.c b/src/mainboard/gizmosphere/gizmo2/buildOpts.c
index 5aa1768..51d9dd0 100644
--- a/src/mainboard/gizmosphere/gizmo2/buildOpts.c
+++ b/src/mainboard/gizmosphere/gizmo2/buildOpts.c
@@ -346,11 +346,11 @@ CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] =
#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
//#define BLDCFG_IR_PIN_CONTROL 0x33
-GPIO_CONTROL olivehill_gpio[] = {
+GPIO_CONTROL gizmo2_gpio[] = {
{183, Function1, GpioIn | GpioOutEnB | PullUpB},
{-1}
};
-//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&olivehill_gpio[0])
+//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&gizmo2_gpio[0])
// The following definitions specify the default values for various parameters in which there are
// no clearly defined defaults to be used in the common file. The values below are based on product
@@ -437,17 +437,24 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
// Byte6Seed, Byte7Seed, ByteEccSeed)
// Speicifes the HW RXEN training seed for a channel of a socket
//
+
+ #define SEED_WL 0x0E
+ WRITE_LEVELING_SEED(
+ ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+ SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,
+ SEED_WL),
+
#define SEED_A 0x12
HW_RXEN_SEED(
ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
SEED_A),
- NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1),
NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
- MOTHER_BOARD_LAYERS (LAYERS_4),
+ MOTHER_BOARD_LAYERS (LAYERS_6),
- MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+ MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */
ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
diff --git a/src/mainboard/gizmosphere/gizmo2/devicetree.cb b/src/mainboard/gizmosphere/gizmo2/devicetree.cb
index 3bcaaee..2828c8f 100644
--- a/src/mainboard/gizmosphere/gizmo2/devicetree.cb
+++ b/src/mainboard/gizmosphere/gizmo2/devicetree.cb
@@ -29,14 +29,14 @@ chip northbridge/amd/agesa/family16kb/root_complex
chip northbridge/amd/agesa/family16kb # PCI side of HT root complex
device pci 0.0 on end # Root Complex
- device pci 1.0 on end # Internal Graphics P2P bridge 0x9804
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x9835
device pci 1.1 on end # Internal Multimedia
device pci 2.0 on end # PCIe Host Bridge
- device pci 2.1 on end # x4 PCIe slot
- device pci 2.2 on end # mPCIe slot
- device pci 2.3 on end # Realtek NIC
- device pci 2.4 on end # Edge Connector
- device pci 2.5 on end # Edge Connector
+ device pci 2.1 on end # PCIe GFX Bridge
+ device pci 2.2 on end # PCIe GPP mini PCIe
+ device pci 2.3 on end # PCIe LAN
+ device pci 2.4 on end # PCIe x2 to high speed edge connector
+ device pci 2.5 on end # PCIe x2 to high speed edge connector
end #chip northbridge/amd/agesa/family16kb
chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
@@ -46,14 +46,7 @@ chip northbridge/amd/agesa/family16kb/root_complex
device pci 12.2 on end # USB
device pci 13.0 on end # USB
device pci 13.2 on end # USB
- device pci 14.0 on # SM
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- end # SM
+ device pci 14.0 on end # SM
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on end # LPC 0x439d
device pci 14.7 on end # SD
@@ -65,11 +58,6 @@ chip northbridge/amd/agesa/family16kb/root_complex
device pci 18.3 on end
device pci 18.4 on end
device pci 18.5 on end
- register "spdAddrLookup" = "
- {
- { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
- { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
- }"
end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
end #domain
More information about the coreboot-gerrit
mailing list