[coreboot-gerrit] New patch to review for coreboot: 72c4917 southbridge/amd rs690 & rs780 spelling fixes

Martin Roth (gaumless@gmail.com) gerrit at coreboot.org
Wed Dec 17 04:54:17 CET 2014


Martin Roth (gaumless at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7841

-gerrit

commit 72c49171a7a15b25d5aa7d4fdfbfa9edd975c79b
Author: Martin Roth <martin.roth at se-eng.com>
Date:   Tue Dec 16 20:52:23 2014 -0700

    southbridge/amd rs690 & rs780 spelling fixes
    
    Trivial fixes, but the editor highlights them, and it's easy to go
    through a bunch of files while I'm otherwise idle.
    
    Change-Id: I5a5af71ea49152accd92dc331a19e57f3717e4ff
    Signed-off-by: Martin Roth <martin.roth at se-eng.com>
---
 src/southbridge/amd/rs690/chip.h        |  2 +-
 src/southbridge/amd/rs690/cmn.c         |  2 +-
 src/southbridge/amd/rs690/gfx.c         |  6 +++---
 src/southbridge/amd/rs690/pcie.c        | 10 +++++-----
 src/southbridge/amd/rs690/rs690.h       |  2 +-
 src/southbridge/amd/rs780/chip.h        |  2 +-
 src/southbridge/amd/rs780/early_setup.c |  6 +++---
 src/southbridge/amd/rs780/gfx.c         | 16 ++++++++--------
 src/southbridge/amd/rs780/pcie.c        |  8 ++++----
 src/southbridge/amd/rs780/rs780.h       |  6 +++---
 10 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/src/southbridge/amd/rs690/chip.h b/src/southbridge/amd/rs690/chip.h
index ec8aa05..689a5dd 100644
--- a/src/southbridge/amd/rs690/chip.h
+++ b/src/southbridge/amd/rs690/chip.h
@@ -30,7 +30,7 @@ struct southbridge_amd_rs690_config
 	u8 gfx_lane_reversal;	/* Single/Dual slot lan reversal */
 	u8 gfx_tmds;		/* whether support TMDS? */
 	u8 gfx_compliance;	/* whether support compliance? */
-	u8 gfx_reconfiguration;	/* Dynamic Lind Width Control */
+	u8 gfx_reconfiguration;	/* Dynamic Link Width Control */
 	u8 gfx_link_width;	/* Desired width of lane 2 */
 };
 
diff --git a/src/southbridge/amd/rs690/cmn.c b/src/southbridge/amd/rs690/cmn.c
index 86a6976..eba1c75 100644
--- a/src/southbridge/amd/rs690/cmn.c
+++ b/src/southbridge/amd/rs690/cmn.c
@@ -273,7 +273,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
 			res = 0;
 			count = 0;
 			break;
-		case 0x07:	/* device is in compliance state (training sequence is doen). Move to train the next device */
+		case 0x07:	/* device is in compliance state (training sequence is done). Move to train the next device */
 			res = 1;	/* TODO: CIM sets it to 0 */
 			count = 0;
 			break;
diff --git a/src/southbridge/amd/rs690/gfx.c b/src/southbridge/amd/rs690/gfx.c
index 42e6c35..4de5aca 100644
--- a/src/southbridge/amd/rs690/gfx.c
+++ b/src/southbridge/amd/rs690/gfx.c
@@ -19,7 +19,7 @@
 
 /*
  *  for rs690 internal graphics device
- *  device id of internal grphics:
+ *  device id of internal graphics:
  *	RS690M/T: 0x791f
  *    RS690:	   0x791e
  */
@@ -509,7 +509,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port)
         printk(BIOS_INFO, "rs690_gfx_init step6.\n");
 
 	/* step 7 compliance state, (only need if CMOS option is enabled) */
-	/* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */
+	/* the compliance state is just for test. refer to 4.2.5.2 of PCIe specification */
 	if (cfg->gfx_compliance) {
 		/* force compliance */
 		set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6);
@@ -558,7 +558,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port)
 	pci_write_config16(dev, 0x5a, reg16);
 	printk(BIOS_INFO, "rs690_gfx_init step8.9.\n");
 
-	/* step 8.10 Setting this register to 0x1 will hide the Advanced Error Rporting Capabilities in the PCIE Brider.
+	/* step 8.10 Setting this register to 0x1 will hide the Advanced Error Reporting Capabilities in the PCIE Bridge.
 	 * This will workaround several failures reported by the PCI Compliance test under Vista DTM. */
 	set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 31, 0 << 31);
 	printk(BIOS_INFO, "rs690_gfx_init step8.10.\n");
diff --git a/src/southbridge/amd/rs690/pcie.c b/src/southbridge/amd/rs690/pcie.c
index 0bd4da5..d281725 100644
--- a/src/southbridge/amd/rs690/pcie.c
+++ b/src/southbridge/amd/rs690/pcie.c
@@ -142,7 +142,7 @@ static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev)
 	reg |= cfg->gpp_configuration << 4;
 	nbmisc_write_index(nb_dev, 0x67, reg);
 
-	/* read bit14 and write back its inverst value */
+	/* read bit14 and write back its inverted value */
 	reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
 	reg ^= RECONFIG_GPPSB_GPPSB;
 	nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
@@ -256,7 +256,7 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	case 7:
 		/* Blocks DMA traffic during C3 state */
 		set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
-		/* Enabels TLP flushing */
+		/* Enables TLP flushing */
 		set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
 
 		/* check port enable */
@@ -301,10 +301,10 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	}
 
 	/* step 6b: L0s for the southbridge link */
-	/* To enalbe L0s in the southbridage*/
+	/* To enable L0s in the southbridge*/
 
 	/* step 6c: L0s for the GPP link(s) */
-	/* To eable L0s in the RS690 for the GPP port(s) */
+	/* To enable L0s in the RS690 for the GPP port(s) */
 	set_pcie_enable_bits(nb_dev, 0xf9, 3 << 13, 2 << 13);
 	set_pcie_enable_bits(dev, 0xa0, 0xf << 8, 0x9 << 8);
 	reg16 = pci_read_config16(dev, 0x68);
@@ -312,7 +312,7 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	pci_write_config16(dev, 0x68, reg16);
 
 	/* step 6d: ASPM L1 for the southbridge link */
-	/* To enalbe L1s in the southbridage*/
+	/* To enable L1s in the southbridge*/
 
 	/* step 6e: ASPM L1 for GPP link(s) */;
 	set_pcie_enable_bits(nb_dev, 0xf9, 3 << 13, 2 << 13);
diff --git a/src/southbridge/amd/rs690/rs690.h b/src/southbridge/amd/rs690/rs690.h
index 9f143d4..5bad41e 100644
--- a/src/southbridge/amd/rs690/rs690.h
+++ b/src/southbridge/amd/rs690/rs690.h
@@ -104,7 +104,7 @@ typedef enum _NB_REVISION_ {
 * ------------------------------------------------- */
 extern PCIE_CFG AtiPcieCfg;
 
-/* ----------------- export funtions ----------------- */
+/* ----------------- export functions ----------------- */
 u32 nbmisc_read_index(device_t nb_dev, u32 index);
 void nbmisc_write_index(device_t nb_dev, u32 index, u32 data);
 u32 nbpcie_p_read_index(device_t dev, u32 index);
diff --git a/src/southbridge/amd/rs780/chip.h b/src/southbridge/amd/rs780/chip.h
index 5c64a1a..7a893c7 100644
--- a/src/southbridge/amd/rs780/chip.h
+++ b/src/southbridge/amd/rs780/chip.h
@@ -31,7 +31,7 @@ struct southbridge_amd_rs780_config
 	u8 gfx_lane_reversal;		/* Single/Dual slot lan reversal */
 	u8 gfx_tmds;			/* whether support TMDS? */
 	u8 gfx_compliance;		/* whether support compliance? */
-	u8 gfx_reconfiguration;		/* Dynamic Lind Width Control */
+	u8 gfx_reconfiguration;		/* Dynamic Link Width Control */
 	u8 gfx_link_width;		/* Desired width of lane 2 */
 	u8 gfx_pcie_config;		/* GFX PCIE Modes */
 	u8 gfx_ddi_config;		/* GFX DDI Modes */
diff --git a/src/southbridge/amd/rs780/early_setup.c b/src/southbridge/amd/rs780/early_setup.c
index a36112b..d35ecdd 100644
--- a/src/southbridge/amd/rs780/early_setup.c
+++ b/src/southbridge/amd/rs780/early_setup.c
@@ -256,17 +256,17 @@ static void rs780_htinit(void)
 		set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1);
 		/* Enables error-retry mode */
 		set_nbcfg_enable_bits(rs780_f0, 0x44, 0x1, 0x1);
-		/* Enables scrambling and Disalbes command throttling */
+		/* Enables scrambling and Disables command throttling */
 		set_nbcfg_enable_bits(rs780_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14));
 		/* Enables transmitter de-emphasis */
 		set_nbcfg_enable_bits(rs780_f0, 0xa4, 1 << 31, 1 << 31);
-		/* Enabels transmitter de-emphasis level */
+		/* Enables transmitter de-emphasis level */
 		/* Sets training 0 time */
 		set_nbcfg_enable_bits(rs780_f0, 0xa0, 0x3F, 0x14);
 
 		/* Enables strict TM4 detection */
 		set_htiu_enable_bits(rs780_f0, 0x15, 0x1 << 22, 0x1 << 22);
-		/* Enables proprer DLL reset sequence */
+		/* Enables proper DLL reset sequence */
 		set_htiu_enable_bits(rs780_f0, 0x16, 0x1 << 10, 0x1 << 10);
 
 		/* HyperTransport 3 Processor register settings to be done in northbridge */
diff --git a/src/southbridge/amd/rs780/gfx.c b/src/southbridge/amd/rs780/gfx.c
index 2825925..30a5c69 100644
--- a/src/southbridge/amd/rs780/gfx.c
+++ b/src/southbridge/amd/rs780/gfx.c
@@ -19,7 +19,7 @@
 
 /*
  *  for rs780 internal graphics device
- *  device id of internal grphics:
+ *  device id of internal graphics:
  *	RS780:	0x9610
  *	RS780C:	0x9611
  *	RS780M:	0x9612
@@ -355,7 +355,7 @@ static void internal_gfx_pci_dev_init(struct device *dev)
 	static const u16 memclk_lookup_fam0F [] = {100, 0, 133, 0, 0, 166, 0, 200};
 	static const u16 memclk_lookup_fam10 [] = {200, 266, 333, 400, 533, 667, 800, 800};
 
-	/* We definetely will use this in future. Just leave it here. */
+	/* We definitely will use this in future. Just leave it here. */
 	/*struct southbridge_amd_rs780_config *cfg =
 	   (struct southbridge_amd_rs780_config *)dev->chip_info;*/
 
@@ -961,7 +961,7 @@ static void rs780_internal_gfx_enable(device_t dev)
 	set_nbmc_enable_bits(nb_dev, 0xa1, 0x0ff, 0x044);
 	set_nbmc_enable_bits(nb_dev, 0xb4, 0xf00, 0xb00);
 #if 0
-	/* Controller Termation. */
+	/* Controller Termination. */
 	set_nbmc_enable_bits(nb_dev, 0xb1, 0x77770000, 0x77770000);
 #endif
 
@@ -1124,8 +1124,8 @@ static void dual_port_configuration(device_t nb_dev, device_t dev)
 	if (!result) {
 		/* Powers down all lanes for port A */
 		/* nbpcie_ind_write_index(nb_dev, 0x65, 0x0f0f); */
-		/* Note: I have to disable the slot where there isnt a device,
-		 * otherwise the system will hang. I dont know why. */
+		/* Note: I have to disable the slot where there isn't a device,
+		 * otherwise the system will hang. I don't know why. */
 		set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, 1 << dev_ind);
 
 	} else {		/* step 16.b Link Training was successful */
@@ -1423,7 +1423,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
 	/* done by enable_pci_bar3() before */
 
 	/* step 7 compliance state, (only need if CMOS option is enabled) */
-	/* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */
+	/* the compliance state is just for test. refer to 4.2.5.2 of PCIe specification */
 	if (cfg->gfx_compliance) {
 		/* force compliance */
 		set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6);
@@ -1452,7 +1452,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
 	/* 5.9.12.6. Disables RC ordering logic */
 	set_pcie_enable_bits(nb_dev, 0x20, 1 << 9, 1 << 9);
 
-	/* Enabels TLP flushing. */
+	/* Enables TLP flushing. */
 	/* Note: It is got from RS690. The system will hang without this action. */
 	set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
 
@@ -1530,7 +1530,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
 			     1 << 0 | 0x1F << 1 | 0x1F << 6,
 			     1 << 0 | 0x04 << 1 | 0x04 << 6);
 
-	/* Single-port/Dual-port configureation. */
+	/* Single-port/Dual-port configuration. */
 	switch (cfg->gfx_dual_slot) {
 	case 0:
 		/* step 1, lane reversal (only need if build config option is enabled) */
diff --git a/src/southbridge/amd/rs780/pcie.c b/src/southbridge/amd/rs780/pcie.c
index fcf3d94..060838c 100644
--- a/src/southbridge/amd/rs780/pcie.c
+++ b/src/southbridge/amd/rs780/pcie.c
@@ -149,12 +149,12 @@ static void switching_gppsb_configurations(device_t nb_dev, device_t sb_dev)
 	reg &= ~(1 << 31);
 	nbmisc_write_index(nb_dev, 0x66, reg);
 
-	/* 5.5.7.5-6. read bit14 and write back its inverst value */
+	/* 5.5.7.5-6. read bit14 and write back its inverted value */
 	reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
 	reg ^= RECONFIG_GPPSB_GPPSB;
 	nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
 #else
-	/* 5.5.7.5-6. read bit14 and write back its inverst value */
+	/* 5.5.7.5-6. read bit14 and write back its inverted value */
 	reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
 	reg ^= RECONFIG_GPPSB_GPPSB;
 	nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
@@ -300,7 +300,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 		set_nbmisc_enable_bits(nb_dev, 0x24, 3 << 16, 2 << 16);
 
 	/* 5.10.8.22. Disable GEN2 */
-	/* TODO: should be 2 seperated cases. */
+	/* TODO: should be 2 separated cases. */
 	set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 31, 0 << 31);
 	set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 5, 0 << 5);
 	set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 31, 0 << 31);
@@ -351,7 +351,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
 	case 10:
 		/* 5.10.8.5. Blocks DMA traffic during C3 state */
 		set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
-		/* Enabels TLP flushing */
+		/* Enables TLP flushing */
 		set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
 
 		/* check port enable */
diff --git a/src/southbridge/amd/rs780/rs780.h b/src/southbridge/amd/rs780/rs780.h
index c44a813..f84604d 100644
--- a/src/southbridge/amd/rs780/rs780.h
+++ b/src/southbridge/amd/rs780/rs780.h
@@ -78,7 +78,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
 	ULONG				ulSystemConfig;
 //[0]=1: PowerExpress mode
 //   =0 Non-PowerExpress mode;
-//[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will disable other power state in VBIOS table.
+//[1]=1: system boots up at AMD overdriven state or user customized mode. In this case, driver will disable other power state in VBIOS table.
 //   =0: system boots up at driver control state. Power state depends on VBIOS PP table.
 //[2]=1: PWM method is used on NB voltage control.
 //   =0: GPIO method is used.
@@ -90,7 +90,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
 //   =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
 //[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and VBIOS PP table voltage drop/throttling request will be ignored.
 //   =0: Voltage settings is determined by VBIOS PP table.
-//[7]=1: Enable CLMC Hybird Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
+//[7]=1: Enable CLMC Hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
 //   =0: Enable regular CLMC mode, CDLD and CILR will be enabled.
 //[8]=1: CDLF is supported and enabled by fuse   //CHP 914
 //   =0: CDLF is not supported and not enabled by fuses
@@ -174,7 +174,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
 * ------------------------------------------------- */
 extern PCIE_CFG AtiPcieCfg;
 
-/* ----------------- export funtions ----------------- */
+/* ----------------- export functions ----------------- */
 u32 nbmisc_read_index(device_t nb_dev, u32 index);
 void nbmisc_write_index(device_t nb_dev, u32 index, u32 data);
 u32 nbpcie_p_read_index(device_t dev, u32 index);



More information about the coreboot-gerrit mailing list