[coreboot-gerrit] Patch set updated for coreboot: 8789e71 lippert/literunner-lx/devicetree.cb: Remove trailing whitespace

HAOUAS Elyes (ehaouas@noos.fr) gerrit at coreboot.org
Wed Jul 23 11:39:33 CEST 2014


HAOUAS Elyes (ehaouas at noos.fr) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6352

-gerrit

commit 8789e71020d73f2b7ea4b43b8077f7956f1eb450
Author: Elyes HAOUAS <ehaouas at noos.fr>
Date:   Wed Jul 23 10:47:40 2014 +0200

    lippert/literunner-lx/devicetree.cb: Remove trailing whitespace
    
    Change-Id: Ib71e25a33e7fe6d43f2ebac0494c263318fa243e
    Signed-off-by: Elyes HAOUAS <ehaouas at noos.fr>
---
 src/mainboard/lippert/literunner-lx/devicetree.cb | 170 +++++++++++-----------
 1 file changed, 85 insertions(+), 85 deletions(-)

diff --git a/src/mainboard/lippert/literunner-lx/devicetree.cb b/src/mainboard/lippert/literunner-lx/devicetree.cb
index 088ebca..834f109 100644
--- a/src/mainboard/lippert/literunner-lx/devicetree.cb
+++ b/src/mainboard/lippert/literunner-lx/devicetree.cb
@@ -1,87 +1,87 @@
 chip northbridge/amd/lx
-  device domain 0 on
-    device pci 1.0 on end				# Northbridge
-    device pci 1.1 on end				# Graphics
-    device pci 1.2 on end				# AES
-    chip southbridge/amd/cs5536
-      # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
-      # SIRQ Mode = Active(Quiet) mode. Save power....
-      # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
-      # UARTs, etc IRQs. OK
-      register "lpc_serirq_enable"        = "0x0000129A" # 00010010 10011010
-      register "lpc_serirq_polarity"      = "0x0000ED65" # inverse of above
-      register "lpc_serirq_mode"          = "1"
-      register "enable_gpio_int_route"    = "0x0D0C0700"
-      register "enable_ide_nand_flash"    = "0" # 0:ide mode, 1:flash
-      register "enable_USBP4_device"      = "0" # 0:host, 1:device
-      register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
-      register "com1_enable"              = "1"
-      register "com1_address"             = "0x3E8"
-      register "com1_irq"                 = "6"
-      register "com2_enable"              = "0"
-      register "com2_address"             = "0x2E8"
-      register "com2_irq"                 = "6"
-      register "unwanted_vpci[0]"         = "0" # End of list has a zero
-      device pci 8.0 on end		# Ethernet 2
-      device pci c.0 on end		# IT8888
-      device pci d.0 on end		# Mini-PCI
-      device pci e.0 on end		# Ethernet 1
-      device pci f.0 on			# ISA Bridge
-        chip superio/ite/it8712f
-          device pnp 2e.0 off		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 2e.1 on		# Com1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 2e.2 on		# Com2
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 2e.3 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 2e.4 on		# EC
-            io 0x60 = 0x290 # EC
-            io 0x62 = 0x298 # PME
-            irq 0x70 = 9
-          end
-          device pnp 2e.5 on		# PS/2 keyboard
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1
-          end
-          device pnp 2e.6 on		# PS/2 mouse
-            irq 0x70 = 12
-          end
-          device pnp 2e.7 on		# GPIO
-            io 0x62 = 0x1220 # Simple I/O
-            io 0x64 = 0x1228 # SPI
-          end
-          device pnp 2e.8 off		# MIDI
-            io 0x60 = 0x300
-            irq 0x70 = 9
-          end
-          device pnp 2e.9 off		# Game port
-            io 0x60 = 0x220
-          end
-          device pnp 2e.a off end	# CIR
-        end
-      end
-      device pci f.2 on end		# IDE
-      device pci f.3 on end		# Audio
-      device pci f.4 on end		# OHCI
-      device pci f.5 on end		# EHCI
-    end
-  end
-  # APIC cluster is late CPU init.
-  device cpu_cluster 0 on
-    chip cpu/amd/geode_lx
-      device lapic 0 on end
-    end
-  end
+	device domain 0 on
+		device pci 1.0 on end				# Northbridge
+		device pci 1.1 on end				# Graphics
+		device pci 1.2 on end				# AES
+		chip southbridge/amd/cs5536
+			# IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
+			# SIRQ Mode = Active(Quiet) mode. Save power....
+			# Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
+			# UARTs, etc IRQs. OK
+			register "lpc_serirq_enable"			= "0x0000129A" # 00010010 10011010
+			register "lpc_serirq_polarity"			= "0x0000ED65" # inverse of above
+			register "lpc_serirq_mode"			= "1"
+			register "enable_gpio_int_route"		= "0x0D0C0700"
+			register "enable_ide_nand_flash"		= "0" # 0:ide mode, 1:flash
+			register "enable_USBP4_device"			= "0" # 0:host, 1:device
+			register "enable_USBP4_overcurrent"		= "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+			register "com1_enable"				= "1"
+			register "com1_address"				= "0x3E8"
+			register "com1_irq"				= "6"
+			register "com2_enable"				= "0"
+			register "com2_address"				= "0x2E8"
+			register "com2_irq"				= "6"
+			register "unwanted_vpci[0]"			= "0" # End of list has a zero
+			device pci 8.0 on end		# Ethernet 2
+			device pci c.0 on end		# IT8888
+			device pci d.0 on end		# Mini-PCI
+			device pci e.0 on end		# Ethernet 1
+			device pci f.0 on			# ISA Bridge
+				chip superio/ite/it8712f
+					device pnp 2e.0 off		# Floppy
+						io 0x60 = 0x3f0
+						irq 0x70 = 6
+						drq 0x74 = 2
+					end
+					device pnp 2e.1 on		# Com1
+						io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 2e.2 on		# Com2
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 2e.3 on		# Parallel port
+						io 0x60 = 0x378
+						irq 0x70 = 7
+					end
+					device pnp 2e.4 on		# EC
+						io 0x60 = 0x290 # EC
+						io 0x62 = 0x298 # PME
+						irq 0x70 = 9
+					end
+					device pnp 2e.5 on		# PS/2 keyboard
+						io 0x60 = 0x60
+						io 0x62 = 0x64
+						irq 0x70 = 1
+					end
+					device pnp 2e.6 on		# PS/2 mouse
+						irq 0x70 = 12
+					end
+					device pnp 2e.7 on		# GPIO
+						io 0x62 = 0x1220 # Simple I/O
+						io 0x64 = 0x1228 # SPI
+					end
+					device pnp 2e.8 off		# MIDI
+						io 0x60 = 0x300
+						irq 0x70 = 9
+					end
+					device pnp 2e.9 off		# Game port
+						io 0x60 = 0x220
+					end
+					device pnp 2e.a off end	# CIR
+				end
+			end
+			device pci f.2 on end		# IDE
+			device pci f.3 on end		# Audio
+			device pci f.4 on end		# OHCI
+			device pci f.5 on end		# EHCI
+		end
+	end
+	# APIC cluster is late CPU init.
+	device cpu_cluster 0 on
+		chip cpu/amd/geode_lx
+			device lapic 0 on end
+		end
+	end
 end



More information about the coreboot-gerrit mailing list