[coreboot-gerrit] New patch to review for coreboot: dd4500a mainboard/lippert: Forward port MPTable use mainboard IRQ routing
Edward O'Callaghan (eocallaghan@alterapraxis.com)
gerrit at coreboot.org
Tue Jun 17 09:31:21 CEST 2014
Edward O'Callaghan (eocallaghan at alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6056
-gerrit
commit dd4500a17a70b26062af0caabe0ebf009cf30e4a
Author: Edward O'Callaghan <eocallaghan at alterapraxis.com>
Date: Tue Jun 17 17:28:44 2014 +1000
mainboard/lippert: Forward port MPTable use mainboard IRQ routing
Forward port the following updates to the reference board from which
these lippert boards were derived:
cbc783f Persimmon: Change MPTable to use mainboard IRQ routing
Change-Id: Id4fca6c8ddc6ff72f4a3cc6568631c6186476ec2
Signed-off-by: Edward O'Callaghan <eocallaghan at alterapraxis.com>
---
src/mainboard/lippert/frontrunner-af/mptable.c | 140 ++++++++++++-------------
src/mainboard/lippert/toucan-af/mptable.c | 140 ++++++++++++-------------
2 files changed, 130 insertions(+), 150 deletions(-)
diff --git a/src/mainboard/lippert/frontrunner-af/mptable.c b/src/mainboard/lippert/frontrunner-af/mptable.c
index 6b8aaa6..8639617 100644
--- a/src/mainboard/lippert/frontrunner-af/mptable.c
+++ b/src/mainboard/lippert/frontrunner-af/mptable.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,124 +27,113 @@
#include <stdint.h>
#include <cpu/amd/amdfam14.h>
#include <SBPLATFORM.h>
+#include <southbridge/amd/cimx/cimx_util.h>
+#include <drivers/generic/ioapic/chip.h>
+#include <arch/ioapic.h>
extern u8 bus_sb800[6];
-
extern u32 apicid_sb800;
+extern u32 apicver_sb800;
extern u32 bus_type[256];
extern u32 sbdn_sb800;
-u8 intr_data[] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x10,0x11,0x12,0x13
-};
-
static void *smp_write_config_table(void *v)
{
struct mp_config_table *mc;
int bus_isa;
+ /* Intialize the MP_Table */
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LOCAL_APIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
+ /*
+ * Type 0: Processor Entries:
+ * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+ * CPU Signature (Stepping, Model, Family),
+ * Feature Flags
+ */
smp_write_processors(mc);
+ /* Get Bus Configuration */
get_bus_conf();
+ /*
+ * Type 1: Bus Entries:
+ * Bus ID, Bus Type
+ */
mptable_write_buses(mc, NULL, &bus_isa);
- /* I/O APICs: APIC ID Version State Address */
-
- u32 dword;
- u8 byte;
-
- ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
- dword &= 0xFFFFFFF0;
- smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
-
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ /*
+ * Type 2: I/O APICs:
+ * APIC ID, Version, APIC Flags:EN, Address
+ */
+ smp_write_ioapic(mc, apicid_sb800, apicver_sb800, IO_APIC_ADDR);
+ /*
+ * Type 3: I/O Interrupt Table Entries:
+ * Int Type, Int Polarity, Int Level, Source Bus ID,
+ * Source Bus IRQ, Dest APIC ID, Dest PIN#
+ */
mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
/* PCI interrupts are level triggered, and are
* associated with a specific bus/device/function tuple.
*/
-#if !CONFIG_GENERATE_ACPI_TABLES
#define PCI_INT(bus, dev, fn, pin) \
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
-#else
-#define PCI_INT(bus, dev, fn, pin)
-#endif
- /* APU Internal Graphic Device*/
- PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
- PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+ /* APU Internal Graphic Device */
+ PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]);
+
+ /* SMBUS / ACPI */
+ PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]);
- //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
- /* Southbridge HD Audio: */
- PCI_INT(0x0, 0x14, 0x2, 0x12);
+ /* Southbridge HD Audio */
+ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]);
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+ /* LPC */
+ PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]);
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]);
+ PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]);
+ PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]);
+ PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]);
- /* on board NIC & Slot PCIE. */
+ /* IDE */
+ PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]);
+
+ /* SATA */
+ PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
+
+ /* on board NIC & Slot PCIE */
+ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
/* PCI slots */
- /* PCI_SLOT 0. */
- PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
- PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
- PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
- PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
- PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
- PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
- PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
- PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
- PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
- PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
-
- PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
- PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
- PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
+ /* PCI_SLOT 0 */
+ PCI_INT(bus_sb800[1], 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
+ PCI_INT(bus_sb800[1], 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
+ PCI_INT(bus_sb800[1], 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
+ PCI_INT(bus_sb800[1], 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
/* PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
+ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
/* PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
+ PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
/* PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
+ PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
/* PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
+ PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
/* There is no extension information... */
@@ -155,6 +145,6 @@ static void *smp_write_config_table(void *v)
unsigned long write_smp_table(unsigned long addr)
{
void *v;
- v = smp_write_floating_table(addr, 0);
+ v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */
return (unsigned long)smp_write_config_table(v);
}
diff --git a/src/mainboard/lippert/toucan-af/mptable.c b/src/mainboard/lippert/toucan-af/mptable.c
index 6b8aaa6..8639617 100644
--- a/src/mainboard/lippert/toucan-af/mptable.c
+++ b/src/mainboard/lippert/toucan-af/mptable.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,124 +27,113 @@
#include <stdint.h>
#include <cpu/amd/amdfam14.h>
#include <SBPLATFORM.h>
+#include <southbridge/amd/cimx/cimx_util.h>
+#include <drivers/generic/ioapic/chip.h>
+#include <arch/ioapic.h>
extern u8 bus_sb800[6];
-
extern u32 apicid_sb800;
+extern u32 apicver_sb800;
extern u32 bus_type[256];
extern u32 sbdn_sb800;
-u8 intr_data[] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x10,0x11,0x12,0x13
-};
-
static void *smp_write_config_table(void *v)
{
struct mp_config_table *mc;
int bus_isa;
+ /* Intialize the MP_Table */
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LOCAL_APIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
+ /*
+ * Type 0: Processor Entries:
+ * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+ * CPU Signature (Stepping, Model, Family),
+ * Feature Flags
+ */
smp_write_processors(mc);
+ /* Get Bus Configuration */
get_bus_conf();
+ /*
+ * Type 1: Bus Entries:
+ * Bus ID, Bus Type
+ */
mptable_write_buses(mc, NULL, &bus_isa);
- /* I/O APICs: APIC ID Version State Address */
-
- u32 dword;
- u8 byte;
-
- ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
- dword &= 0xFFFFFFF0;
- smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
-
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ /*
+ * Type 2: I/O APICs:
+ * APIC ID, Version, APIC Flags:EN, Address
+ */
+ smp_write_ioapic(mc, apicid_sb800, apicver_sb800, IO_APIC_ADDR);
+ /*
+ * Type 3: I/O Interrupt Table Entries:
+ * Int Type, Int Polarity, Int Level, Source Bus ID,
+ * Source Bus IRQ, Dest APIC ID, Dest PIN#
+ */
mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
/* PCI interrupts are level triggered, and are
* associated with a specific bus/device/function tuple.
*/
-#if !CONFIG_GENERATE_ACPI_TABLES
#define PCI_INT(bus, dev, fn, pin) \
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
-#else
-#define PCI_INT(bus, dev, fn, pin)
-#endif
- /* APU Internal Graphic Device*/
- PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
- PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+ /* APU Internal Graphic Device */
+ PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]);
+
+ /* SMBUS / ACPI */
+ PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]);
- //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
- /* Southbridge HD Audio: */
- PCI_INT(0x0, 0x14, 0x2, 0x12);
+ /* Southbridge HD Audio */
+ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]);
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+ /* LPC */
+ PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]);
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]);
+ PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]);
+ PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]);
+ PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]);
- /* on board NIC & Slot PCIE. */
+ /* IDE */
+ PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]);
+
+ /* SATA */
+ PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
+
+ /* on board NIC & Slot PCIE */
+ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
/* PCI slots */
- /* PCI_SLOT 0. */
- PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
- PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
- PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
- PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
- PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
- PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
- PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
- PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
- PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
- PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
-
- PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
- PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
- PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
+ /* PCI_SLOT 0 */
+ PCI_INT(bus_sb800[1], 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
+ PCI_INT(bus_sb800[1], 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
+ PCI_INT(bus_sb800[1], 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
+ PCI_INT(bus_sb800[1], 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
/* PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
+ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
/* PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
+ PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
/* PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
+ PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
/* PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
+ PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
/* There is no extension information... */
@@ -155,6 +145,6 @@ static void *smp_write_config_table(void *v)
unsigned long write_smp_table(unsigned long addr)
{
void *v;
- v = smp_write_floating_table(addr, 0);
+ v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */
return (unsigned long)smp_write_config_table(v);
}
More information about the coreboot-gerrit
mailing list