[coreboot-gerrit] Patch set updated for coreboot: gm45/gma.c: use screen on vga connector if connected
Arthur Heymans (arthur@aheymans.xyz)
gerrit at coreboot.org
Mon Aug 22 21:33:43 CEST 2016
Arthur Heymans (arthur at aheymans.xyz) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16295
-gerrit
commit f755e3f42310cf12b90080f432010da71b5f3fac
Author: Arthur Heymans <arthur at aheymans.xyz>
Date: Mon Aug 22 17:58:46 2016 +0200
gm45/gma.c: use screen on vga connector if connected
The intel x4x native graphic init works on gm45 to use the vga screen
instead of the integrated lvds screen. This patch integrates it in gm45
in a way that the behavior is similar to vbios:
If no vga display is connected the internal lvds screen is used.
If an external screen is detected on the vga port it will be used instead.
Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391
Signed-off-by: Arthur Heymans <arthur at aheymans.xyz>
---
src/northbridge/intel/gm45/gma.c | 155 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 152 insertions(+), 3 deletions(-)
diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c
index b02c89b..ad887b9 100644
--- a/src/northbridge/intel/gm45/gma.c
+++ b/src/northbridge/intel/gm45/gma.c
@@ -47,7 +47,7 @@ void gtt_write(u32 reg, u32 data)
write32(res2mmio(gtt_res, reg, 0), data);
}
-static void intel_gma_init(const struct northbridge_intel_gm45_config *info,
+static void gma_init_lvds(const struct northbridge_intel_gm45_config *info,
u8 *mmio, u32 physbase, u16 piobase, u32 lfb)
{
@@ -344,6 +344,152 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info,
}
}
+static void gma_init_vga(const struct northbridge_intel_gm45_config *info,
+ u8 *mmio)
+{
+
+ int i;
+ u32 hactive, vactive;
+
+ vga_gr_write(0x18, 0);
+
+ write32(mmio + VGA0, 0x31108);
+ write32(mmio + VGA1, 0x31406);
+
+ write32(mmio + ADPA, ADPA_DAC_ENABLE
+ | ADPA_PIPE_A_SELECT
+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR
+ | ADPA_CRT_HOTPLUG_ENABLE
+ | ADPA_USE_VGA_HVPOLARITY
+ | ADPA_VSYNC_CNTL_ENABLE
+ | ADPA_HSYNC_CNTL_ENABLE
+ | ADPA_DPMS_ON
+ );
+
+ write32(mmio + 0x7041c, 0x0);
+ write32(mmio + DPLL_MD(0), 0x3);
+ write32(mmio + DPLL_MD(1), 0x3);
+
+ vga_misc_write(0x67);
+
+ const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+ 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
+ 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
+ 0xff
+ };
+ vga_cr_write(0x11, 0);
+
+ for (i = 0; i <= 0x18; i++)
+ vga_cr_write(i, cr[i]);
+
+ /* Disable screen memory to prevent garbage from appearing. */
+ vga_sr_write(1, vga_sr_read(1) | 0x20);
+
+ hactive = 640;
+ vactive = 400;
+
+ mdelay(1);
+ write32(mmio + FP0(0), 0x31108);
+ write32(mmio + DPLL(0),
+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL
+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
+ | 0x10601
+ );
+ mdelay(1);
+ write32(mmio + DPLL(0),
+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL
+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
+ | 0x10601
+ );
+
+ write32(mmio + ADPA, ADPA_DAC_ENABLE
+ | ADPA_PIPE_A_SELECT
+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR
+ | ADPA_CRT_HOTPLUG_ENABLE
+ | ADPA_USE_VGA_HVPOLARITY
+ | ADPA_VSYNC_CNTL_ENABLE
+ | ADPA_HSYNC_CNTL_ENABLE
+ | ADPA_DPMS_ON
+ );
+
+ write32(mmio + HTOTAL(0),
+ ((hactive - 1) << 16)
+ | (hactive - 1));
+ write32(mmio + HBLANK(0),
+ ((hactive - 1) << 16)
+ | (hactive - 1));
+ write32(mmio + HSYNC(0),
+ ((hactive - 1) << 16)
+ | (hactive - 1));
+
+ write32(mmio + VTOTAL(0), ((vactive - 1) << 16)
+ | (vactive - 1));
+ write32(mmio + VBLANK(0), ((vactive - 1) << 16)
+ | (vactive - 1));
+ write32(mmio + VSYNC(0),
+ ((vactive - 1) << 16)
+ | (vactive - 1));
+
+ write32(mmio + PIPECONF(0), PIPECONF_DISABLE);
+
+ write32(mmio + PF_WIN_POS(0), 0);
+
+ write32(mmio + PIPESRC(0), (639 << 16) | 399);
+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3);
+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16));
+ write32(mmio + PFIT_CONTROL, 0xa0000000);
+
+ mdelay(1);
+
+ write32(mmio + 0x000f000c, 0x00002040);
+ mdelay(1);
+ write32(mmio + 0x000f000c, 0x00002050);
+ write32(mmio + 0x00060100, 0x00044000);
+ mdelay(1);
+ write32(mmio + PIPECONF(0), PIPECONF_ENABLE
+ | PIPECONF_BPP_6 | PIPECONF_DITHER_EN);
+
+ write32(mmio + VGACNTRL, 0x0);
+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888);
+ mdelay(1);
+
+ write32(mmio + ADPA, ADPA_DAC_ENABLE
+ | ADPA_PIPE_A_SELECT
+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR
+ | ADPA_CRT_HOTPLUG_ENABLE
+ | ADPA_USE_VGA_HVPOLARITY
+ | ADPA_VSYNC_CNTL_ENABLE
+ | ADPA_HSYNC_CNTL_ENABLE
+ | ADPA_DPMS_ON
+ );
+
+ vga_textmode_init();
+
+ /* Enable screen memory. */
+ vga_sr_write(1, vga_sr_read(1) & ~0x20);
+
+ /* Clear interrupts. */
+ write32(mmio + DEIIR, 0xffffffff);
+ write32(mmio + SDEIIR, 0xffffffff);
+}
+
+/* compare the header of the vga edid header
+ if vga is not connected it should not have a correct header */
+static u8 vga_connected(u8 *mmio)
+{
+ u8 vga_edid[128];
+ u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00};
+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128);
+ for (int i = 0; i < 8; i++) {
+ if (vga_edid[i] != header[i]) {
+ printk(BIOS_SPEW, "VGA not connected. Using LVDS display\n");
+ return 0;
+ }
+ }
+ printk(BIOS_SPEW, "VGA display connected\n");
+ return 1;
+}
+
static void gma_pm_init_post_vbios(struct device *const dev)
{
const struct northbridge_intel_gm45_config *const conf = dev->chip_info;
@@ -419,8 +565,11 @@ static void gma_func0_init(struct device *dev)
printk(BIOS_SPEW,
"Initializing VGA without OPROM. MMIO 0x%llx\n",
gtt_res->base);
- intel_gma_init(conf, res2mmio(gtt_res, 0, 0), physbase,
- pio_res->base, lfb_res->base);
+ if (vga_connected(res2mmio(gtt_res, 0, 0)))
+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0));
+ else
+ gma_init_lvds(conf, res2mmio(gtt_res, 0, 0),
+ physbase, pio_res->base, lfb_res->base);
}
/* Linux relies on VBT for panel info. */
More information about the coreboot-gerrit
mailing list