[coreboot-gerrit] New patch to review for coreboot: mainboard/intel/galileo: Gen1 - Set correct I2C scripts

[Lee Leahy (lpleahyjr@gmail.com)]

Lee Leahy (lpleahyjr at gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15258

-gerrit

commit fdb9b45a92b3693ec9b2e96e1abfc026663f4213
Author: Lee Leahy <leroy.p.leahy at intel.com>
Date:   Sat Jun 18 09:54:43 2016 -0700

    mainboard/intel/galileo: Gen1 - Set correct I2C scripts
    
    Switch the I2C scripts to properly match the I2C address selection for
    the Galileo Gen1 board.
    
    TEST=Build an run on Galileo Gen1
    
    Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9
    Signed-off-by: Lee Leahy <leroy.p.leahy at intel.com>
---
 src/mainboard/intel/galileo/gpio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/mainboard/intel/galileo/gpio.c b/src/mainboard/intel/galileo/gpio.c
index 0b55bc6..8f3c2e3 100644
--- a/src/mainboard/intel/galileo/gpio.c
+++ b/src/mainboard/intel/galileo/gpio.c
@@ -39,7 +39,7 @@ void car_mainboard_pre_console_init(void)
 		else
 			script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
 				& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
-				? gen1_hsuart0_0x21 : gen1_hsuart0_0x20;
+				? gen1_hsuart0_0x20 : gen1_hsuart0_0x21;
 		reg_script_run(script);
 	}
 }
@@ -57,7 +57,7 @@ void mainboard_gpio_i2c_init(device_t dev)
 		/* Determine which I2C address is in use */
 		script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
 			& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
-			? gen1_i2c_0x21_init : gen1_i2c_0x20_init;
+			? gen1_i2c_0x20_init : gen1_i2c_0x21_init;
 
 	/* Initialize the I2C chips */
 	reg_script_run(script);