[coreboot-gerrit] New patch to review for coreboot: mainboard/google/reef: Configure PERST pin for reef DVT
Venkateswarlu V Vinjamuri (venkateswarlu.v.vinjamuri@intel.com)
gerrit at coreboot.org
Sat Oct 15 01:20:10 CEST 2016
Venkateswarlu V Vinjamuri (venkateswarlu.v.vinjamuri at intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17030
-gerrit
commit e95bf41319f8c4536125081d1ab1eef3b10f0846
Author: Vaibhav Shankar <vaibhav.shankar at intel.com>
Date: Fri Oct 14 16:08:32 2016 -0700
mainboard/google/reef: Configure PERST pin for reef DVT
Configure GPIO 120 as PERST on DVT. This is to assert WiFi PERST
during s0ix entry.
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri at intel.com>
Change-Id: Iab18b2de621a1a9226c78493f6defa15081db875
---
src/mainboard/google/reef/variants/baseboard/devicetree.cb | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
index f393019..b52cabe 100644
--- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
@@ -15,7 +15,7 @@ chip soc/intel/apollolake
# GPIO for PERST_0
# If the Board has PERST_0 signal, assign the GPIO
# If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
- register "prt0_gpio" = "GPIO_PRT0_UDEF"
+ register "prt0_gpio" = "GPIO_120"
# EMMC TX DATA Delay 1
# Refer to EDS-Vol2-22.3.
More information about the coreboot-gerrit
mailing list