[coreboot-gerrit] Patch set updated for coreboot: mainboard/google/reef: move devicetree to baseboard
Aaron Durbin (adurbin@chromium.org)
gerrit at coreboot.org
Wed Sep 7 18:56:00 CEST 2016
Aaron Durbin (adurbin at chromium.org) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16510
-gerrit
commit 810b359eb3224c25919eaa0434982a42af32d6df
Author: Aaron Durbin <adurbin at chromium.org>
Date: Tue Sep 6 15:58:00 2016 -0500
mainboard/google/reef: move devicetree to baseboard
Move the current devicetree.cb to be under variants/baseboard.
New variants can provide their own devicetree as needed.
BUG=chrome-os-partner:56677
Change-Id: Ib109ca4be883884b318264500d14aa8d40e3072a
Signed-off-by: Aaron Durbin <adurbin at chromium.org>
---
src/mainboard/google/reef/Kconfig | 4 +
src/mainboard/google/reef/devicetree.cb | 152 ---------------------
.../google/reef/variants/baseboard/devicetree.cb | 152 +++++++++++++++++++++
3 files changed, 156 insertions(+), 152 deletions(-)
diff --git a/src/mainboard/google/reef/Kconfig b/src/mainboard/google/reef/Kconfig
index 3da0d8b..0013ffd 100644
--- a/src/mainboard/google/reef/Kconfig
+++ b/src/mainboard/google/reef/Kconfig
@@ -44,6 +44,10 @@ config VARIANT_DIR
string
default "reef" if BOARD_GOOGLE_REEF
+config DEVICETREE
+ string
+ default "variants/baseboard/devicetree.cb"
+
config MAINBOARD_PART_NUMBER
string
default "Reef" if BOARD_GOOGLE_REEF
diff --git a/src/mainboard/google/reef/devicetree.cb b/src/mainboard/google/reef/devicetree.cb
deleted file mode 100644
index 2ac20de..0000000
--- a/src/mainboard/google/reef/devicetree.cb
+++ /dev/null
@@ -1,152 +0,0 @@
-chip soc/intel/apollolake
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
-
- register "pcie_rp4_clkreq_pin" = "0" # wifi/bt
-
- # EMMC TX DATA Delay 1
- # Refer to EDS-Vol2-22.3.
- # [14:8] steps of delay for HS400, each 125ps.
- # [6:0] steps of delay for SDR104/HS200, each 125ps.
- register "emmc_tx_data_cntl1" = "0x0C16"
-
- # EMMC TX DATA Delay 2
- # Refer to EDS-Vol2-22.3.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_tx_data_cntl2" = "0x28162828"
-
- # EMMC RX CMD/DATA Delay 1
- # Refer to EDS-Vol2-22.3.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_rx_cmd_data_cntl1" = "0x00181717"
-
- # EMMC RX CMD/DATA Delay 2
- # Refer to EDS-Vol2-22.3.
- # [17:16] stands for Rx Clock before Output Buffer
- # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
- # [6:0] steps of delay for HS200, each 125ps.
- register "emmc_rx_cmd_data_cntl2" = "0x10008"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # Enable Audio Clock and Power gating
- register "hdaudio_clk_gate_enable" = "1"
- register "hdaudio_pwr_gate_enable" = "1"
- register "hdaudio_bios_config_lockdown" = "1"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route, i.e., if this route changes then the affected GPE
- # offset bits also need to be changed. This sets the PMC register
- # GPE_CFG fields.
- register "gpe0_dw1" = "PMC_GPE_N_31_0"
- register "gpe0_dw2" = "PMC_GPE_N_63_32"
- register "gpe0_dw3" = "PMC_GPE_SW_31_0"
-
- # Enable I2C2 bus early for TPM access
- register "i2c[2].early_init" = "1"
-
- # Minimum SLP S3 assertion width 28ms.
- register "slp_s3_assertion_width_usecs" = "28000"
-
- device domain 0 on
- device pci 00.0 on end # - Host Bridge
- device pci 00.1 on end # - DPTF
- device pci 00.2 on end # - NPK
- device pci 02.0 on end # - Gen
- device pci 03.0 on end # - Iunit
- device pci 0d.0 on end # - P2SB
- device pci 0d.1 on end # - PMC
- device pci 0d.2 on end # - SPI
- device pci 0d.3 on end # - Shared SRAM
- device pci 0e.0 on # - Audio
- chip drivers/generic/max98357a
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPIO_76)"
- device generic 0 on end
- end
- end
- device pci 11.0 off end # - ISH
- device pci 12.0 off end # - SATA
- device pci 13.0 off end # - Root Port 2 - PCIe-A 0
- device pci 13.1 off end # - Root Port 3 - PCIe-A 1
- device pci 13.2 off end # - Root Port 4 - PCIe-A 2
- device pci 13.3 off end # - Root Port 5 - PCIe-A 3
- device pci 14.0 on end # - Root Port 0 - PCIe-B 0 - Wifi
- device pci 14.1 off end # - Root Port 1 - PCIe-B 1
- device pci 15.0 on end # - XHCI
- device pci 15.1 off end # - XDCI
- device pci 16.0 on # - I2C 0
- chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
- register "btn_cfg" = "50"
- register "mic_det_thr" = "500"
- register "jack_ins_deb" = "20"
- register "jack_det_rate" = ""32ms_64ms""
- register "jack_rem_deb" = "1"
- register "a_d_btn_thr" = "0xa"
- register "d_b_btn_thr" = "0x16"
- register "b_c_btn_thr" = "0x21"
- register "c_mic_btn_thr" = "0x3e"
- register "btn_avg" = "4"
- register "adc_1bit_rpt" = "1"
- register "micbias_lvl" = "2600"
- register "mic_amp_in_sel" = ""diff""
- device i2c 1a on end
- end
- end
- device pci 16.1 on end # - I2C 1
- device pci 16.2 on
- chip drivers/i2c/tpm
- register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
- device i2c 50 on end
- end
- end # - I2C 2
- device pci 16.3 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
- device i2c 10 on end
- end
- end # - I2C 3
- device pci 17.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
- register "wake" = "GPE0_DW1_15"
- device i2c 15 on end
- end
- end # - I2C 4
- device pci 17.1 on end # - I2C 5
- device pci 17.2 on end # - I2C 6
- device pci 17.3 on end # - I2C 7
- device pci 18.0 on end # - UART 0
- device pci 18.1 on end # - UART 1
- device pci 18.2 on end # - UART 2
- device pci 18.3 on end # - UART 3
- device pci 19.0 on end # - SPI 0
- device pci 19.1 on end # - SPI 1
- device pci 19.2 on end # - SPI 2
- device pci 1a.0 on end # - PWM
- device pci 1b.0 on end # - SDCARD
- device pci 1c.0 on end # - eMMC
- device pci 1e.0 off end # - SDIO
- device pci 1f.0 on # - LPC
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end
- device pci 1f.1 on end # - SMBUS
- end
-end
diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
new file mode 100644
index 0000000..2ac20de
--- /dev/null
+++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
@@ -0,0 +1,152 @@
+chip soc/intel/apollolake
+
+ device cpu_cluster 0 on
+ device lapic 0 on end
+ end
+
+ register "pcie_rp4_clkreq_pin" = "0" # wifi/bt
+
+ # EMMC TX DATA Delay 1
+ # Refer to EDS-Vol2-22.3.
+ # [14:8] steps of delay for HS400, each 125ps.
+ # [6:0] steps of delay for SDR104/HS200, each 125ps.
+ register "emmc_tx_data_cntl1" = "0x0C16"
+
+ # EMMC TX DATA Delay 2
+ # Refer to EDS-Vol2-22.3.
+ # [30:24] steps of delay for SDR50, each 125ps.
+ # [22:16] steps of delay for DDR50, each 125ps.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps.
+ # [6:0] steps of delay for SDR12, each 125ps.
+ register "emmc_tx_data_cntl2" = "0x28162828"
+
+ # EMMC RX CMD/DATA Delay 1
+ # Refer to EDS-Vol2-22.3.
+ # [30:24] steps of delay for SDR50, each 125ps.
+ # [22:16] steps of delay for DDR50, each 125ps.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps.
+ # [6:0] steps of delay for SDR12, each 125ps.
+ register "emmc_rx_cmd_data_cntl1" = "0x00181717"
+
+ # EMMC RX CMD/DATA Delay 2
+ # Refer to EDS-Vol2-22.3.
+ # [17:16] stands for Rx Clock before Output Buffer
+ # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+ # [6:0] steps of delay for HS200, each 125ps.
+ register "emmc_rx_cmd_data_cntl2" = "0x10008"
+
+ # Enable DPTF
+ register "dptf_enable" = "1"
+
+ # Enable Audio Clock and Power gating
+ register "hdaudio_clk_gate_enable" = "1"
+ register "hdaudio_pwr_gate_enable" = "1"
+ register "hdaudio_bios_config_lockdown" = "1"
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route, i.e., if this route changes then the affected GPE
+ # offset bits also need to be changed. This sets the PMC register
+ # GPE_CFG fields.
+ register "gpe0_dw1" = "PMC_GPE_N_31_0"
+ register "gpe0_dw2" = "PMC_GPE_N_63_32"
+ register "gpe0_dw3" = "PMC_GPE_SW_31_0"
+
+ # Enable I2C2 bus early for TPM access
+ register "i2c[2].early_init" = "1"
+
+ # Minimum SLP S3 assertion width 28ms.
+ register "slp_s3_assertion_width_usecs" = "28000"
+
+ device domain 0 on
+ device pci 00.0 on end # - Host Bridge
+ device pci 00.1 on end # - DPTF
+ device pci 00.2 on end # - NPK
+ device pci 02.0 on end # - Gen
+ device pci 03.0 on end # - Iunit
+ device pci 0d.0 on end # - P2SB
+ device pci 0d.1 on end # - PMC
+ device pci 0d.2 on end # - SPI
+ device pci 0d.3 on end # - Shared SRAM
+ device pci 0e.0 on # - Audio
+ chip drivers/generic/max98357a
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPIO_76)"
+ device generic 0 on end
+ end
+ end
+ device pci 11.0 off end # - ISH
+ device pci 12.0 off end # - SATA
+ device pci 13.0 off end # - Root Port 2 - PCIe-A 0
+ device pci 13.1 off end # - Root Port 3 - PCIe-A 1
+ device pci 13.2 off end # - Root Port 4 - PCIe-A 2
+ device pci 13.3 off end # - Root Port 5 - PCIe-A 3
+ device pci 14.0 on end # - Root Port 0 - PCIe-B 0 - Wifi
+ device pci 14.1 off end # - Root Port 1 - PCIe-B 1
+ device pci 15.0 on end # - XHCI
+ device pci 15.1 off end # - XDCI
+ device pci 16.0 on # - I2C 0
+ chip drivers/i2c/da7219
+ register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "btn_cfg" = "50"
+ register "mic_det_thr" = "500"
+ register "jack_ins_deb" = "20"
+ register "jack_det_rate" = ""32ms_64ms""
+ register "jack_rem_deb" = "1"
+ register "a_d_btn_thr" = "0xa"
+ register "d_b_btn_thr" = "0x16"
+ register "b_c_btn_thr" = "0x21"
+ register "c_mic_btn_thr" = "0x3e"
+ register "btn_avg" = "4"
+ register "adc_1bit_rpt" = "1"
+ register "micbias_lvl" = "2600"
+ register "mic_amp_in_sel" = ""diff""
+ device i2c 1a on end
+ end
+ end
+ device pci 16.1 on end # - I2C 1
+ device pci 16.2 on
+ chip drivers/i2c/tpm
+ register "hid" = ""GOOG0005""
+ register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ device i2c 50 on end
+ end
+ end # - I2C 2
+ device pci 16.3 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ device i2c 10 on end
+ end
+ end # - I2C 3
+ device pci 17.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "wake" = "GPE0_DW1_15"
+ device i2c 15 on end
+ end
+ end # - I2C 4
+ device pci 17.1 on end # - I2C 5
+ device pci 17.2 on end # - I2C 6
+ device pci 17.3 on end # - I2C 7
+ device pci 18.0 on end # - UART 0
+ device pci 18.1 on end # - UART 1
+ device pci 18.2 on end # - UART 2
+ device pci 18.3 on end # - UART 3
+ device pci 19.0 on end # - SPI 0
+ device pci 19.1 on end # - SPI 1
+ device pci 19.2 on end # - SPI 2
+ device pci 1a.0 on end # - PWM
+ device pci 1b.0 on end # - SDCARD
+ device pci 1c.0 on end # - eMMC
+ device pci 1e.0 off end # - SDIO
+ device pci 1f.0 on # - LPC
+ chip ec/google/chromeec
+ device pnp 0c09.0 on end
+ end
+ end
+ device pci 1f.1 on end # - SMBUS
+ end
+end
More information about the coreboot-gerrit
mailing list