[coreboot-gerrit] Patch set updated for coreboot: i945/gma.c: add native VGA init

Arthur Heymans (arthur@aheymans.xyz) gerrit at coreboot.org
Wed Sep 7 23:41:27 CEST 2016


Arthur Heymans (arthur at aheymans.xyz) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16511

-gerrit

commit 7ed0951bcf59dfd8b1893232b674455ff8f03f83
Author: Arthur Heymans <arthur at aheymans.xyz>
Date:   Mon Sep 5 22:46:11 2016 +0200

    i945/gma.c: add native VGA init
    
    This reuses the Intel Pineview native graphic initialization
    to have output on the VGA connector of i945 devices.
    
    The behavior is the same as with the vendor VBIOS BLOB.
    It uses the external VGA display if it is connected.
    
    Change-Id: I7eaee87d16df2e5c9ebeaaff01d36ec1aa4ea495
    Signed-off-by: Arthur Heymans <arthur at aheymans.xyz>
---
 src/northbridge/intel/i945/gma.c | 196 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 194 insertions(+), 2 deletions(-)

diff --git a/src/northbridge/intel/i945/gma.c b/src/northbridge/intel/i945/gma.c
index 3f0b5b4..ac19d5a 100644
--- a/src/northbridge/intel/i945/gma.c
+++ b/src/northbridge/intel/i945/gma.c
@@ -78,7 +78,7 @@ static int gtt_setup(void *mmiobase)
 	return 0;
 }
 
-static int intel_gma_init(struct northbridge_intel_i945_config *conf,
+static int intel_gma_init_lvds(struct northbridge_intel_i945_config *conf,
 			  unsigned int pphysbase, unsigned int piobase,
 			  void *pmmio, unsigned int pgfx)
 {
@@ -382,6 +382,194 @@ static int intel_gma_init(struct northbridge_intel_i945_config *conf,
 #endif
 	return 0;
 }
+
+static int intel_gma_init_vga(struct northbridge_intel_i945_config *conf,
+			  unsigned int pphysbase, unsigned int piobase,
+			  void *pmmio, unsigned int pgfx)
+{
+	int i;
+	u32 hactive, vactive;
+	u16 reg16;
+	u32 uma_size;
+
+	printk(BIOS_SPEW, "pmmio %x addrport %x physbase %x\n",
+		(u32)pmmio, piobase, pphysbase);
+
+	gtt_setup(pmmio);
+
+	/* Disable VGA.  */
+	write32(pmmio + VGACNTRL, VGA_DISP_DISABLE);
+
+	/* Disable pipes.  */
+	write32(pmmio + PIPECONF(0), 0);
+	write32(pmmio + PIPECONF(1), 0);
+
+	write32(pmmio + INSTPM, 0x800);
+
+	vga_gr_write(0x18, 0);
+
+	write32(pmmio + VGA0, 0x200074);
+	write32(pmmio + VGA1, 0x200074);
+
+	write32(pmmio + DSPFW3, 0x7f3f00c1 & ~PINEVIEW_SELF_REFRESH_EN);
+	write32(pmmio + DSPCLK_GATE_D, 0);
+	write32(pmmio + FW_BLC, 0x03060106);
+	write32(pmmio + FW_BLC2, 0x00000306);
+
+	write32(pmmio + ADPA, ADPA_DAC_ENABLE
+			| ADPA_PIPE_A_SELECT
+			| ADPA_USE_VGA_HVPOLARITY
+			| ADPA_VSYNC_CNTL_ENABLE
+			| ADPA_HSYNC_CNTL_ENABLE
+			| ADPA_DPMS_ON
+			);
+
+	write32(pmmio + 0x7041c, 0x0);
+
+	write32(pmmio + DPLL_MD(0), 0x3);
+	write32(pmmio + DPLL_MD(1), 0x3);
+	write32(pmmio + DSPCNTR(1), 0x1000000);
+	write32(pmmio + PIPESRC(1), 0x027f01df);
+
+	vga_misc_write(0x67);
+	const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+		    0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
+		    0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
+		    0xff
+	};
+	vga_cr_write(0x11, 0);
+
+	for (i = 0; i <= 0x18; i++)
+		vga_cr_write(i, cr[i]);
+
+	// Disable screen memory to prevent garbage from appearing.
+	vga_sr_write(1, vga_sr_read(1) | 0x20);
+	hactive = 640;
+	vactive = 400;
+
+	mdelay(1);
+	write32(pmmio + DPLL(0),
+		DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL
+		| DPLL_VGA_MODE_DIS
+		| DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
+		| 0x400601
+		);
+	mdelay(1);
+	write32(pmmio + DPLL(0),
+		DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL
+		| DPLL_VGA_MODE_DIS
+		| DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
+		| 0x400601
+		);
+
+	write32(pmmio + ADPA, ADPA_DAC_ENABLE
+			| ADPA_PIPE_A_SELECT
+			| ADPA_USE_VGA_HVPOLARITY
+			| ADPA_VSYNC_CNTL_ENABLE
+			| ADPA_HSYNC_CNTL_ENABLE
+			| ADPA_DPMS_ON
+			);
+
+	write32(pmmio + HTOTAL(0),
+		((hactive - 1) << 16)
+		| (hactive - 1));
+	write32(pmmio + HBLANK(0),
+		((hactive - 1) << 16)
+		| (hactive - 1));
+	write32(pmmio + HSYNC(0),
+		((hactive - 1) << 16)
+		| (hactive - 1));
+
+	write32(pmmio + VTOTAL(0), ((vactive - 1) << 16)
+		| (vactive - 1));
+	write32(pmmio + VBLANK(0), ((vactive - 1) << 16)
+		| (vactive - 1));
+	write32(pmmio + VSYNC(0),
+		((vactive - 1) << 16)
+		| (vactive - 1));
+
+	write32(pmmio + PF_WIN_POS(0), 0);
+
+	write32(pmmio + PIPESRC(0), (639 << 16) | 399);
+	write32(pmmio + PF_CTL(0),PF_ENABLE | PF_FILTER_MED_3x3);
+	write32(pmmio + PF_WIN_SZ(0), vactive | (hactive << 16));
+	write32(pmmio + PFIT_CONTROL, 0x0);
+
+	mdelay(1);
+
+	write32(pmmio + FDI_RX_CTL(0), 0x00002040);
+	mdelay(1);
+	write32(pmmio + FDI_RX_CTL(0), 0x80002050);
+	write32(pmmio + FDI_TX_CTL(0), 0x00044000);
+	mdelay(1);
+	write32(pmmio + FDI_TX_CTL(0), 0x80044000);
+	write32(pmmio + PIPECONF(0), PIPECONF_ENABLE | PIPECONF_BPP_6 | PIPECONF_DITHER_EN);
+
+	write32(pmmio + VGACNTRL, 0x0);
+	write32(pmmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888);
+	mdelay(1);
+
+	write32(pmmio + ADPA, ADPA_DAC_ENABLE
+			| ADPA_PIPE_A_SELECT
+			| ADPA_USE_VGA_HVPOLARITY
+			| ADPA_VSYNC_CNTL_ENABLE
+			| ADPA_HSYNC_CNTL_ENABLE
+			| ADPA_DPMS_ON
+			);
+
+	write32(pmmio + DSPFW3, 0x7f3f00c1);
+	write32(pmmio + MI_MODE, 0x200 | VS_TIMER_DISPATCH);
+	write32(pmmio + CACHE_MODE_0, (0x6820 | (1 << 9)) & ~(1 << 5));
+	write32(pmmio + CACHE_MODE_1, 0x380 & ~(1 << 9));
+
+	/* Set up GTT.  */
+
+	reg16 = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0, 0)), GGC);
+	uma_size = 0;
+	if (!(reg16 & 2)) {
+		uma_size = decode_igd_memory_size((reg16 >> 4) & 7);
+		printk(BIOS_DEBUG, "%dM UMA\n", uma_size >> 10);
+	}
+
+	for (i = 0; i < (uma_size - 256) / 4; i++)
+	{
+		outl((i << 2) | 1, piobase);
+		outl(pphysbase + (i << 12) + 1, piobase + 4);
+	}
+
+	/* Clear interrupts. */
+	write32(pmmio + DEIIR, 0xffffffff);
+	write32(pmmio + SDEIIR, 0xffffffff);
+	write32(pmmio + IIR, 0xffffffff);
+	write32(pmmio + IMR, 0xffffffff);
+	write32(pmmio + EIR, 0xffffffff);
+
+	vga_textmode_init();
+
+	/* Enable screen memory.  */
+	vga_sr_write(1, vga_sr_read(1) & ~0x20);
+
+	return 0;
+
+}
+
+/* compare the header of the vga edid header */
+/* if vga is not connected it should have a correct header */
+static int vga_connected(u8 *pmmio) {
+	u8 vga_edid[128];
+	u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00};
+	intel_gmbus_read_edid(pmmio + GMBUS0, 2, 0x50, vga_edid, 128);
+	intel_gmbus_stop(pmmio + GMBUS0);
+	for (int i = 0; i < 8; i++) {
+		if (vga_edid[i] != header[i]) {
+			printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n");
+			return 0;
+		}
+	}
+	printk(BIOS_SPEW, "VGA display connected\n");
+	return 1;
+}
+
 #endif
 
 static void gma_func0_init(struct device *dev)
@@ -423,7 +611,11 @@ static void gma_func0_init(struct device *dev)
 	);
 
 	int err;
-	err = intel_gma_init(conf, pci_read_config32(dev, 0x5c) & ~0xf,
+	if (vga_connected(mmiobase))
+		err = intel_gma_init_vga(conf, pci_read_config32(dev, 0x5c) & ~0xf,
+					iobase, mmiobase, graphics_base);
+	else
+		err = intel_gma_init_lvds(conf, pci_read_config32(dev, 0x5c) & ~0xf,
 			     iobase, mmiobase, graphics_base);
 	if (err == 0)
 		gfx_set_init_done(1);



More information about the coreboot-gerrit mailing list