[coreboot-gerrit] New patch to review for coreboot: mainboard/kontron/986lcd-m: Use tabs for indents
HAOUAS Elyes (ehaouas@noos.fr)
gerrit at coreboot.org
Thu Sep 29 20:39:19 CEST 2016
HAOUAS Elyes (ehaouas at noos.fr) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16820
-gerrit
commit 4e10c22145036d7b15d922272c69bd27bdb115be
Author: Elyes HAOUAS <ehaouas at noos.fr>
Date: Thu Sep 29 20:29:54 2016 +0200
mainboard/kontron/986lcd-m: Use tabs for indents
Change-Id: Ibeb0da2f75b4aec32f5238e5634bc1f1d8220b84
Signed-off-by: Elyes HAOUAS <ehaouas at noos.fr>
---
src/mainboard/kontron/986lcd-m/devicetree.cb | 98 ++++++++++++++--------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/src/mainboard/kontron/986lcd-m/devicetree.cb b/src/mainboard/kontron/986lcd-m/devicetree.cb
index b9ddf75..f2cb35d 100644
--- a/src/mainboard/kontron/986lcd-m/devicetree.cb
+++ b/src/mainboard/kontron/986lcd-m/devicetree.cb
@@ -3,19 +3,19 @@ chip northbridge/intel/i945
register "gfx.ndid" = "3"
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
- device cpu_cluster 0 on
- chip cpu/intel/socket_mFCPGA478
- device lapic 0 on end
- end
- end
+ device cpu_cluster 0 on
+ chip cpu/intel/socket_mFCPGA478
+ device lapic 0 on end
+ end
+ end
- device domain 0 on
- device pci 00.0 on end # host bridge
+ device domain 0 on
+ device pci 00.0 on end # host bridge
device pci 01.0 off end # i945 PCIe root port
device pci 02.0 on end # vga controller
device pci 02.1 on end # display controller
- chip southbridge/intel/i82801gx
+ chip southbridge/intel/i82801gx
register "pirqa_routing" = "0x0b"
register "pirqb_routing" = "0x0b"
register "pirqc_routing" = "0x0b"
@@ -31,45 +31,45 @@ chip northbridge/intel/i945
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "gpi13_routing" = "1"
- register "ide_legacy_combined" = "0x1"
- register "ide_enable_primary" = "0x1"
- register "ide_enable_secondary" = "0x1"
- register "sata_ahci" = "0x0"
+ register "ide_legacy_combined" = "0x1"
+ register "ide_enable_primary" = "0x1"
+ register "ide_enable_secondary" = "0x1"
+ register "sata_ahci" = "0x0"
register "c3_latency" = "85"
register "p_cnt_throttling_supported" = "0"
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe
- device pci 1c.1 on end # PCIe
- device pci 1c.2 on end # PCIe
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe
+ device pci 1c.1 on end # PCIe
+ device pci 1c.2 on end # PCIe
#device pci 1c.3 off end # PCIe port 4
#device pci 1c.4 off end # PCIe port 5
#device pci 1c.5 off end # PCIe port 6
- device pci 1d.0 on end # USB UHCI
- device pci 1d.1 on end # USB UHCI
- device pci 1d.2 on end # USB UHCI
- device pci 1d.3 on end # USB UHCI
- device pci 1d.7 on end # USB2 EHCI
- device pci 1e.0 on end # PCI bridge
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.3 on end # USB UHCI
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1e.0 on end # PCI bridge
#device pci 1e.2 off end # AC'97 Audio
#device pci 1e.3 off end # AC'97 Modem
- device pci 1f.0 on # LPC bridge
- chip superio/winbond/w83627thg
+ device pci 1f.0 on # LPC bridge
+ chip superio/winbond/w83627thg
device pnp 2e.0 off # Floppy
end
device pnp 2e.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 5
end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
+ device pnp 2e.2 on
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
- end
+ end
device pnp 2e.5 on # Keyboard+Mouse
io 0x60 = 0x60
io 0x62 = 0x64
@@ -96,21 +96,21 @@ chip northbridge/intel/i945
irq 0x70 = 0
end
- end
- chip superio/winbond/w83627thg
- device pnp 4e.0 off # Floppy
+ end
+ chip superio/winbond/w83627thg
+ device pnp 4e.0 off # Floppy
end
device pnp 4e.1 off # Parport
end
- device pnp 4e.2 on # COM3
- io 0x60 = 0x3e8
- irq 0x70 = 6
- end
- device pnp 4e.3 on # COM4
- io 0x60 = 0x2e8
- irq 0x70 = 6
+ device pnp 4e.2 on # COM3
+ io 0x60 = 0x3e8
+ irq 0x70 = 6
+ end
+ device pnp 4e.3 on # COM4
+ io 0x60 = 0x2e8
+ irq 0x70 = 6
irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
- end
+ end
device pnp 4e.5 off # Keyboard
end
device pnp 4e.7 off # GPIO1, GAME, MIDI
@@ -123,13 +123,13 @@ chip northbridge/intel/i945
end
device pnp 4e.b off # HWM
end
- end
+ end
- end
+ end
#device pci 1f.1 off end # IDE
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
#device pci 1f.4 off end # Realtek ID Codec
- end
- end
+ end
+ end
end
More information about the coreboot-gerrit
mailing list