Ronald G. Minnich
rminnich at lanl.gov
Sat Nov 2 13:52:00 CET 2002
On Sat, 2 Nov 2002, Andrew Ip wrote:
> > the 82801ca has erase/write protect pins as well that are usually wired to
> > a GPIO line from the superio or to a jumper.
> I think it is a oem board, so I don't know where it is from. I did make sure
> the bios write jump is set, and setpci -d 8086:2480 4e.b=1. BTW, this board is
> using SST 49LF004 as bios flash. If I can backup the original bios, I can also
> try the 49LF004.
that part is read-compatible but not write-compatible with the 82801ca. I
am pretty sure you can't program it in that motherboard.
More information about the coreboot