P6STMT
ollie lho
ollie at sis.com.tw
Tue Nov 12 23:20:00 CET 2002
On Tue, 2002-11-12 at 19:37, Adam Sulmicki wrote:
> > does anyone here runs P6STMT mbo by EliteGroup?
> > Here are some sample urls to the MBO:
> > http://www.ecs.com.tw/products/p6stmt.htm
> > http://www.amptron.com/html/P6STMT.html
> > http://www.icuepc.com/p6stmt.htm
> > The "WinFast 6300" config file seems to work with it,
> > but I was wondering if perhaps there's some better
> > config file.
>
> Ok, I have setup its own configuration for it, with its own PIRQ table.
>
> Now there's one more issue remaining. At the present time I have to boot
> from the PC BIOS classic, and then *warm* boot into the LinuxBIOS. If I do
> not do that the system will hard hang in few minutes after boot. It will
> be either during fsck (if there's one), or somewhere at Linux command
> prompt.
>
> any ideas?
>
> How I would go about settting dll.inc ? What's the way to get those
> values?
>
It is used to configure the Delay Lock Loop in the DRAM controller. The
value depends on chipset and PCB layout.
Ollie
More information about the coreboot
mailing list