[Etherboot-developers] booting ide flash from latest etherboot (CVS)

[Ronald G Minnich]

On 24 Oct 2002, Eric W. Biederman wrote:

> make ide_disk.elf
> Or in the normal case of wanting the nic driver as well.
> make eepro100--ide_disk.nrv2belf (nrv2b is the upx compression algorithm)

no target like that exists in the latest cvs for the 5.1 tree.

Also, it seems to me that if I set up BOOT_xyz to be BOOT_DISK, that stuff
should get turned on, so that the Principle of Least Surprise is honored.

ron
ron