more on the 82802 & e7500 chipset
steven james
pyro at linuxlabs.com
Fri Sep 6 09:17:00 CEST 2002
Greetings,
A good workaround for the setpci bug is to use -d to select by device ID
I believe the device is 8086:2480
G'day,
sjames
On Thu, 5 Sep 2002, Ronald G Minnich wrote:
>
> OK, if I do the equivalent of:
> setpci -s 0:1f.0 4e.b=1
>
> Then writes are enabled. Note you can't really do this due to a bug in the
> pcitools == have to do it by program.
>
> Then, if I run flash_rom, jedec_probe will get an ID of the 82802AB of
>
> vendor 89, device code AD (4 mbit part)
>
> So flash_rom I think might be able to flash this part!
>
> I have added an entry into flash_rom and will test this tomorrow.
>
> ron
>
>
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>
--
-------------------------steven james, director of research, linux labs
... ........ ..... .... 230 peachtree st nw ste 701
the original linux labs atlanta.ga.us 30303
-since 1995 http://www.linuxlabs.com
office 404.577.7747 fax 404.577.7743
-----------------------------------------------------------------------
More information about the coreboot
mailing list