Problems with etherboot + AA patch IDE

[Adam Agnew]

Instead of running "make", run "make bin32/sis900.ebi" or possibly "make
bin32/mynetcard.ebi" if your board doesn't use a sis900 (not that it
should matter, the network booting is left as a fall back if the polled
ide booting doesn't work).

- Adam Agnew


On Thu, 3 Apr 2003, Pellanda Luca wrote:

>
>
> I'm running as 2.11.90.0.29 and compiling etherboot 5.0.6 + the AA IDE boot
> patch  found on the list causes problems:
>
> gcc -E -Wp,-Wall -DASK_BOOT=3 -DANS_DEFAULT=ANS_NETWORK -DMOTD -DIMAGE_MENU
> -DBA
> CKOFF_LIMIT=7 -DCONGESTED -DLINUXBIOS -DCONFIG_TSC_CURRTICKS
> -DCONSOLE_SERIAL -
> DCOMCONSOLE=0x3f8 -DCOMPRESERVE -DCONFIG_PCI_DIRECT -DELF_IMAGE
> -DPOLLED_IDE -O
> s -ffreestanding -fstrength-reduce -fomit-frame-pointer -mcpu=i386
> -malign-jumps
> =1 -malign-loops=1 -malign-functions=1 -Wall -W -Wno-format -Wno-unused
> -DVERSIO
> N_MAJOR=5 -DVERSION_MINOR=0 -DVERSION=\"5.0.6\" -DRELOC=0x400000  start32.S
> | as
>   -o bin32/start32.o
> {standard input}: Assembler messages:
> {standard input}:119: Warning: indirect ljmp without `*'
> {standard input}:235: Error: suffix or operands invalid for `ljmp'
> make: *** [bin32/start32.o] Error 1
> I think that RELOC is not good value. Why ?
>
>