Unified setup...

[Stefan Reinauer]

Hi again,

the coherent_ht.c changes are all to LYH's hardcodes to 
coherent_ht_finalize(). These are there to setup link speed and width
on the cht nodes. 

I remember tomz from LNXI was working on that on a higher level at pci 
setup. Is that code complete by now? Are all bridges set up full speed?

Then we could just drop this code, which i would favour. Otherwise it
should walk into the motherboard specific code.

As far as I can see this code is noop anyways since speed changes need a
reset or LDTSTOP_L which is not asserted here. LYH, any comments?

--- coherent_ht.c       2003-08-14 11:11:10.000000000 +0200
+++ coherent_ht.1.c     2003-08-28 06:42:50.000000000 +0200
[..]
-        PCI_ADDR(0, 0x18, 0, 0xc4), 0x88ff9c05, 0x770000d0,
+        PCI_ADDR(0, 0x18, 0, 0xc4), 0x88ff9c05, 0x11000020,
[..]
-        PCI_ADDR(0, 0x18, 0, 0xc8), 0xfffff0ff, 0x00000000,
+        PCI_ADDR(0, 0x18, 0, 0xc8), 0xfffff0ff, 0x00000400,
[..]
-        PCI_ADDR(0, 0x18, 0, 0x94), 0xff0000ff, 0x00ff0000,
+        PCI_ADDR(0, 0x18, 0, 0x94), 0xff0000ff, 0x00050000,
[..]
-        PCI_ADDR(0, 0x18, 0, 0xd4), 0xff0000ff, 0x00000000,
+        PCI_ADDR(0, 0x18, 0, 0xd4), 0xff0000ff, 0x00030000,


Stefan
-- 
Architecture Team
    SuSE Linux AG