EPIA-M serial port 1/2 baud rate insanity
Dave Ashley
linuxbios at xdr.com
Wed Dec 17 17:47:00 CET 2003
>I don't know what the problem is, I don't have an EPIA-M yet.
>...
>Are your sure the clock source for the superio or uart is the same for
>linuxbios and award?
>The "emulator for VGA bios" will actually run anything...
If sending you an epia-m would mean you'd begin looking at it I'll
get you one. Let me know.
I'm not sure of the clock source, VIA hasn't provided a schematic for the
board. The datasheet indicates 2 clock sources, one is for the LPC
interface and the other is for the main clock. LPC is the 33 mhz pci clock.
The other clock is 48 mhz. I had a scope on the chip and as near as I can
tell the 48 mhz clock was in fact 48 mhz. I didn't look at the 33 mhz clock
at all.
-Dave
More information about the coreboot
mailing list