TUSL2-C almost work.....

[ron minnich]

On Tue, 13 May 2003, Yap Ee Huey wrote:

> Hi,
> 
> I have some improvement on my TUSL2-C board (intel 82815ep chipset). The
> ram initialization is successful . However, it boots neither etherboot
> elf nor adlo payload. It hangs after the following messages from serial
> port .

Your problem is that etherboot and adlo are not coming up. 

Are you sure that you built etherboot so that it only uses serial and does 
not require BIOS interrupts? 

I think that may be the problem.

congratulations on getting this working -- it will be very useful.

ron