TUSL2-C almost work.....

Yap Ee Huey yapeehuey at hotmail.com
Wed May 14 06:10:01 CEST 2003


> > This has to be seek=1, not skip=1. Otherwise you overwrite your
> > partition table with an incomplete elf file instead of leaving
> > your partition table there and writing the complete file.
> >
>
>I am going to regret that particular typo of mine for a long time.
>
>Sorry.

Doesn't matter, both not working for me.
I follow Richard's etherboot instructions on etherboot 5.1.8 but still
no luck. Could it be my IDE harddisk not recognized ?

OUTPUTS:
------------------------------------------------------------------------------------------------------
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.2
   203:init_bytes() - zkernel_start:0xfff00000  zkernel_mask:0x0000ffff
Searching for 16 byte tags
    64:rom_read_bytes() - overflowed source buffer. max_block = 15
init_bytes found 0 tags
Found ELF candiate at offset 0
Loading Etherboot version: 5.1.8
Dropping non PT_LOAD segment
New segment addr 0x20000 size 0xeee0 offset 0xb0 filesize 0x617c
(cleaned up) New segment addr 0x20000 size 0xeee0 offset 0xb0 filesize 
0x617c
Loading Segment: addr: 0x000000000ff7ece8 memsz: 0x000000000000eee0 filesz: 
0x000000000000617c
Clearing Segment: addr: 0x000000000ff84e64 memsz: 0x0000000000008d64
Jumping to boot code at 0x20000
------------------------------------------------------------------------------------------------------------

Then it restarts.


>
>I think the solution of using sfdisk to build a /dev/hda1 that starts at
>sector 1 is better. Fixing etherboot to scan 64k in each direction is
>best. I tried that but it still didn't find the elfimage.
>
>ron
>

_________________________________________________________________
Download ringtones, logos and picture messages from MSN Malaysia 
http://www.msn.com.my/mobile/ringtones/default.asp




More information about the coreboot mailing list