EPIA-M 600 Cannot start

[Niki Waibel]

i am using a epia-m 600 with success.
current cvs of freebios/linuxbios version1 works fine.

i used:
===
$ cat ../example.config | grep -v ^# | grep -v ^$
target /home/niki/packages/freebios-20031024-build
mainboard via/epia-m
option SERIAL_CONSOLE=1
option TTYS0_BAUD=115200
option DEFAULT_CONSOLE_LOGLEVEL=9
option DEBUG=1
option RAMTEST=1
option USE_GENERIC_ROM=1
option STD_FLASH=1
option ROM_SIZE=262144
option PAYLOAD_SIZE=196608
option USE_ELF_BOOT=1
payload /home/niki/packages/filo-0.4/filo.elf
===

there is currently a problem with the speed of the serial port.
it might be a baudrate less (in my case it is 57600 although i
specified 115200).

i can send you my romimage for testing if you want.

gcc: 3.3.1
binutils: 2.14
(should not matter)

system: my own ;-)
===
busybox/1.0.0pre3
freeswan/2.04
gmp/4.1.2
ipsec-tools/0.2.2
iptables/1.2.9
libol/0.3.11
mawk/1.1.3
ntp/4.2.0
openssh/3.7.1p2
openssl/0.9.7c
pcsc-lite/1.2.0
ppp/20031029
rp-pppoe/3.5
setserial/2.17
syslog-ng/1.6.0rc4
tinylogin/1.4
uclibc/0.9.22
util-linux/2.12
zlib/1.1.4.1
===

niki

On 21-Nov-2003 Dmitry Borisov wrote:
> Some additional info that might help.
> 
> gcc (GCC) 3.2 20020903 (Red Hat Linux 8.0 3.2-7)
> GNU assembler 2.13.90.0.2 20020802
> 
> Dmitry/
>   ----- Original Message ----- 
>   From: Dmitry Borisov 
>   To: linuxbios at clustermatic.org 
>   Sent: Thursday, November 20, 2003 11:11 PM
>   Subject: EPIA-M 600 Cannot start
> 
> 
>   My respect to all.
>   I've got problem trying to burn linuxbios into EPIA-M 600. 
>   Config file attached if it could help. When I burn image and restart mb, it does not say anything to the serial. Even singl
e
> character.
>   Here is the output from flash_rom utility:
> 
>   SST39SF020A found at physical address: 0xfffc0000
>   Part is SST39SF020A
>   Programming Page: 0063 at address: 0x0003f000
> 
>   Sorry, that's pretty much I have from linuxbios to share.
> 
>   I wonder if anyone having EPIA-M 600 could send me the correct
> config file and correct romimage as well or let me know when I'm
> wrong.
>   Appreciate your help,
>   Dmitry/