EPIA-M 600 Cannot start

[Dmitry Borisov]

Thanks Niki,
It look almost the same as mine. Appreciate if you can send me working image
so I can narrow down the problem.
Dmitry/

----- Original Message ----- 
From: "Niki Waibel" <niki.waibel at newlogic.com>
To: "Dmitry Borisov" <jbors at mail.ru>
Cc: <linuxbios at clustermatic.org>
Sent: Friday, November 21, 2003 5:20 AM
Subject: Re: EPIA-M 600 Cannot start


> i am using a epia-m 600 with success.
> current cvs of freebios/linuxbios version1 works fine.
>
> i used:
> ===
> $ cat ../example.config | grep -v ^# | grep -v ^$
> target /home/niki/packages/freebios-20031024-build
> mainboard via/epia-m
> option SERIAL_CONSOLE=1
> option TTYS0_BAUD=115200
> option DEFAULT_CONSOLE_LOGLEVEL=9
> option DEBUG=1
> option RAMTEST=1
> option USE_GENERIC_ROM=1
> option STD_FLASH=1
> option ROM_SIZE=262144
> option PAYLOAD_SIZE=196608
> option USE_ELF_BOOT=1
> payload /home/niki/packages/filo-0.4/filo.elf
> ===
>
> there is currently a problem with the speed of the serial port.
> it might be a baudrate less (in my case it is 57600 although i
> specified 115200).
>
> i can send you my romimage for testing if you want.
>
> gcc: 3.3.1
> binutils: 2.14
> (should not matter)