(fwd) Re: Epox Boards [sachse at gmx.net]
Stefan Reinauer
stepan at suse.de
Thu Oct 16 04:51:01 CEST 2003
Does anyone know whether these work?
----- Forwarded message from Mark-Andres Hohm <sachse at gmx.net> -----
Date: Wed, 15 Oct 2003 19:48:34 +0200
From: Mark-Andres Hohm <sachse at gmx.net>
To: Stefan Reinauer <stepan at suse.de>
Subject: Re: Epox Boards
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Stefan Reinauer wrote:
| * Mark-Andres Hohm <sachse at gmx.net> [031013 20:59]:
|
|>-----BEGIN PGP SIGNED MESSAGE-----
|>Hash: SHA1
|>
|>Have anyone expirience with Epox board and linuxbios?
|
|
| _Which_ Epox board? Can you send lspci -vvv?
|
| Stefan
here are the lspci from the epox kta3pro
this have to work with linux and win
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 03)
~ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
~ Latency: 8
~ Region 0: Memory at d0000000 (32-bit, prefetchable) [size=32M]
~ Capabilities: [a0] AGP version 2.0
~ Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
~ Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(prog-if 00 [Normal decode])
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
~ Latency: 0
~ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
~ I/O behind bridge: 0000f000-00000fff
~ Memory behind bridge: d4000000-d5ffffff
~ Prefetchable memory behind bridge: d2000000-d3ffffff
~ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
~ Capabilities: [80] Power Management version 2
~ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
~ Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 0
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
~ Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32
~ Region 4: I/O ports at 9000 [size=16]
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
[UHCI])
~ Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32, cache line size 08
~ Interrupt: pin D routed to IRQ 11
~ Region 4: I/O ports at 9400 [size=32]
~ Capabilities: [80] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
~ Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
~ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Interrupt: pin ? routed to IRQ 9
~ Capabilities: [68] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
AC97 Audio Controller (rev 50)
~ Subsystem: VIA Technologies, Inc. Onboard Audio on EP7KXA
~ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Interrupt: pin C routed to IRQ 5
~ Region 0: I/O ports at 9c00 [size=256]
~ Region 1: I/O ports at a000 [size=4]
~ Region 2: I/O ports at a400 [size=4]
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
~ Subsystem: Allied Telesyn International AT-2500TX/ACPI
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32 (8000ns min, 16000ns max)
~ Interrupt: pin A routed to IRQ 10
~ Region 0: I/O ports at a800 [size=256]
~ Region 1: Memory at d7001000 (32-bit, non-prefetchable) [size=256]
~ Capabilities: [50] Power Management version 1
~ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
~ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32 (2000ns min, 2000ns max), cache line size 08
~ Interrupt: pin A routed to IRQ 11
~ Region 0: I/O ports at ac00 [disabled] [size=256]
~ Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=4K]
~ Expansion ROM at <unassigned> [disabled] [size=64K]
00:0e.0 Unknown mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372 (rev 04)
~ Subsystem: Triones Technologies, Inc. HPT370A
~ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 120 (2000ns min, 2000ns max)
~ Interrupt: pin A routed to IRQ 10
~ Region 0: I/O ports at b000 [size=8]
~ Region 1: I/O ports at b400 [size=4]
~ Region 2: I/O ports at b800 [size=8]
~ Region 3: I/O ports at bc00 [size=4]
~ Region 4: I/O ports at c000 [size=256]
~ Expansion ROM at <unassigned> [disabled] [size=128K]
~ Capabilities: [60] Power Management version 2
~ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2
Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
~ Subsystem: CardExpert Technology: Unknown device 0000
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32 (1250ns min, 250ns max)
~ Interrupt: pin A routed to IRQ 12
~ Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
~ Region 1: Memory at d2000000 (32-bit, prefetchable) [size=32M]
~ Expansion ROM at <unassigned> [disabled] [size=64K]
~ Capabilities: [60] Power Management version 1
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
~ Capabilities: [44] AGP version 2.0
~ Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4
~ Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
-
---------------------------------------------------------------------------------
here are the log from my 2nd board which is only wors with linux because
ist the router. its a epox 8k9a.
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
~ Subsystem: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
~ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
~ Latency: 8
~ Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
~ Capabilities: [a0] AGP version 2.0
~ Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
~ Command: RQ=31 SBA- AGP- 64bit- FW- Rate=<none>
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00
[Normal decode])
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
~ Latency: 0
~ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
~ I/O behind bridge: 00009000-00009fff
~ Memory behind bridge: dc000000-ddffffff
~ Prefetchable memory behind bridge: d8000000-dbffffff
~ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
~ Capabilities: [80] Power Management version 2
~ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
~ Subsystem: Realtek Semiconductor Co., Ltd. RT8139
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32 (8000ns min, 16000ns max)
~ Interrupt: pin A routed to IRQ 19
~ Region 0: I/O ports at a000 [size=256]
~ Region 1: Memory at df001000 (32-bit, non-prefetchable) [size=256]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
~ Subsystem: Realtek Semiconductor Co., Ltd. RT8139
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32 (8000ns min, 16000ns max)
~ Interrupt: pin A routed to IRQ 19
~ Region 0: I/O ports at a400 [size=256]
~ Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=256]
00:0e.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
~ Subsystem: Triones Technologies, Inc.: Unknown device 0001
~ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 120 (2000ns min, 2000ns max)
~ Interrupt: pin A routed to IRQ 17
~ Region 0: I/O ports at a800 [size=8]
~ Region 1: I/O ports at ac00 [size=4]
~ Region 2: I/O ports at b000 [size=8]
~ Region 3: I/O ports at b400 [size=4]
~ Region 4: I/O ports at b800 [size=256]
~ Expansion ROM at <unassigned> [disabled] [size=128K]
~ Capabilities: [60] Power Management version 2
~ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
~ Subsystem: Triones Technologies, Inc.: Unknown device 0001
~ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 120 (2000ns min, 2000ns max)
~ Interrupt: pin A routed to IRQ 17
~ Region 0: I/O ports at bc00 [size=8]
~ Region 1: I/O ports at c000 [size=4]
~ Region 2: I/O ports at c400 [size=8]
~ Region 3: I/O ports at c800 [size=4]
~ Region 4: I/O ports at cc00 [size=256]
~ Capabilities: [60] Power Management version 2
~ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
~ Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 0
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
~ Subsystem: Unknown device 1695:3005
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32
~ Interrupt: pin A routed to IRQ 255
~ Region 4: I/O ports at dc00 [size=16]
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio Controller (rev 50)
~ Subsystem: Unknown device 1695:3005
~ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Interrupt: pin C routed to IRQ 12
~ Region 0: I/O ports at e000 [size=256]
~ Capabilities: [c0] Power Management version 2
~ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO
AGP 4x TMDS (prog-if 00 [VGA])
~ Subsystem: Giga-byte Technology: Unknown device 4005
~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
~ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~ Latency: 32 (2000ns min), cache line size 08
~ Interrupt: pin A routed to IRQ 16
~ Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
~ Region 1: I/O ports at 9000 [size=256]
~ Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=16K]
~ Expansion ROM at <unassigned> [disabled] [size=128K]
~ Capabilities: [50] AGP version 2.0
~ Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
~ Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
~ Capabilities: [5c] Power Management version 2
~ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE/jYhuPC4Ugo8dWvcRAkaHAJ41qrX/dERy2uuSfPhkyD3mmMQ94wCfasJd
k6skYq275YuYv92I5Ct/bUc=
=aty1
-----END PGP SIGNATURE-----
----- End forwarded message -----
Best regards,
Stefan Reinauer
--
Architecture Team
SuSE Linux AG
More information about the coreboot
mailing list