EPIA-M 10000 etherboot

[dhroepaem at freechal.com]

hello~

i have been testing linuxbios with epia-m10000 and rom emulator.
i made the romimage from /freebios/src/mainboard/via/epia-m/example.config.
when loaded it to rom emulator and reset, hyperterminal said "x-x-f"
but when loaded it and reset after loading original epia-m 10000 bios and reset, etherboot worked successfully.

following is the config file
#
# linuxbios config file for: via epia-m mini-itx
#
target /opt/cwlinux/buildrom/epia-m
# via epia
mainboard via/epia-m
# enable serial console for debugging
option serial_console=1
# option serial_post=1
option ttys0_baud=115200
# option ttys0_baud=57600
option default_console_loglevel=9
option debug=1
# use 256kb standard flash as normal bios 
option ramtest=1
option use_generic_rom=1
option std_flash=1
#option zkernel_start=0xfffc0000
option rom_size=262144
# payload size = 192kb
option payload_size=196608
# use elf loader to load etherboot
option use_elf_boot=1
# use etherboot as our payload 
payload /opt/cwlinux/etherboot/src/bin32/via-rhine.ebi
# payload /opt/cwlinux/memtest86/memtest

plz, give me some hints~ :-)


DDR보다 신난다! 온라인으로 즐기는 3D아바타 댄싱 게임
http://showtime2.freechal.com/index.asp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030907/0eade005/attachment.html>