EPIA-M 10000 etherboot

[Andrew Ip]

> i have been testing linuxbios with epia-m10000 and rom emulator.
> i made the romimage from /freebios/src/mainboard/via/epia-m/example.config.
> when loaded it to rom emulator and reset, hyperterminal said "x-x-f"
> but when loaded it and reset after loading original epia-m 10000 bios and reset, etherboot worked successfully.
You may want to use 57600 instead.  It is a magic from Award which I haven't
figured out yet.

-Andrew

> following is the config file
> #
> # linuxbios config file for: via epia-m mini-itx
> #
> target /opt/cwlinux/buildrom/epia-m
> # via epia
> mainboard via/epia-m
> # enable serial console for debugging
> option serial_console=1
> # option serial_post=1
> option ttys0_baud=115200
> # option ttys0_baud=57600
> option default_console_loglevel=9
> option debug=1
> # use 256kb standard flash as normal bios 
> option ramtest=1
> option use_generic_rom=1
> option std_flash=1
> #option zkernel_start=0xfffc0000
> option rom_size=262144
> # payload size = 192kb
> option payload_size=196608
> # use elf loader to load etherboot
> option use_elf_boot=1
> # use etherboot as our payload 
> payload /opt/cwlinux/etherboot/src/bin32/via-rhine.ebi
> # payload /opt/cwlinux/memtest86/memtest
> 
> plz, give me some hints~ :-)
> 
> 
> DDRº¸´Ù ½Å³­´Ù! ¿Â¶óÀÎÀ¸·Î Áñ±â´Â 3D¾Æ¹ÙŸ ´í½Ì °ÔÀÓ
> http://showtime2.freechal.com/index.asp
-- 
Andrew Ip
Email:  aip at cwlinux.com
Tel:    (852) 2542 2046
Fax:    (852) 2542 2036
Mobile: (852) 9201 9866

Cwlinux Limited
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Hong Kong.

For public pgp key, please obtain it from http://www.keyserver.net/en.