epia800 direct vga working
SONE Takeshi
ts1 at tsn.or.jp
Sun Sep 21 09:33:00 CEST 2003
On Sat, Sep 20, 2003 at 11:25:58PM -0700, Steve Gehlbach wrote:
> Nathanael Noblet wrote:
>
> >I don't need a framebuffer on boot, but once loaded would I be able to
> >insmod the epiafb module and get that working?
>
> More than likely, since a framebuffer driver made for epia vga must have
> intimate knowledge of the chipset, so it should completely initialize it.
Unfortunately it does not. Looks like we have to program some more
VGA registers for framebuffer to function properly.
> >Though, I'm wondering if the modifications you've made are (specifically
> >the epia800.config) are compatible with an elf filo payload? The add
> >action commands seem to run after the commands that concatenate the
> >linuxbios image file with its payload.. so I'm somewhat at a loss as to
> >what to flash the chip with. If you know what I mean.
> I have not used payloads, so I am not sure, maybe others can comment.
Steve's config uses linux loader rather than ELF loader.
--
Takeshi
More information about the coreboot
mailing list