Does anyone has text console or framebuffer working on SC1200 without VGA-BIOS ?
Bernd Mödeker
moedeker at hmk-gmbh.de
Tue Sep 23 15:30:01 CEST 2003
> > the internal vga pci device at 0:12.4 should be found when you write
> > 0x80009400 to pci index reg
> > 0xcf8. After that the value 0x0504100b should be returned at 0xcfc as
vendor
> > id (0x100b) and device id (0x0504).
> > After single stepping this return value AX is set to 0x4000 and not
0x100b.
> > Unfortunaly EAX is not printed:
> >
> > c000:0124 ed IN EAX,DX
> > c000:124 -
> > AX=4000 BX=0000 CX=0000 DX=0cfc SP=ffea BP=0000 SI=0000
> > DI=0000
> > DS=0000 ES=c000 SS=0030 CS=c000 IP=0126 NV UP DI PL ZR NA
PE
> > NC
> >
>
> you're not going to get eax in an 8086. This is an issue.
ok this seems to be a fact
>
> I wonder if there is an enable for the vga device that we are not setting.
I could'nt follow. What do you mean?
Bernd
More information about the coreboot
mailing list