[FILO] prompt doesn't work...

[NEWBELL7 at magicn.com]

Hi, long time no see. 

I did build a filo with default config. ( make  & make )  
serial debug message is like below. But I can't type any command.
VGA Console prompt has also the same problem.

My Board is likely to EPIA 5000. 

Does FILO use only PS/2 keyboard as Input Device Driver?

FILO !!! Good Idea .

Thanks ... 
from newbie.
========================================================================
==
FILO version 0.2 ( newbell at VIPER <mailto:newbell at VIPER> ) Thu Sep 25
09:18:26 KST 2003
Press <Enter> for default boot, or <Esc> for boot prompt... timed out
boot: hda1:/boot/kernel.elf
Unknown filesystem type
boot:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030924/d8b14e11/attachment.html>