config tool + tree enumeration
YhLu
YhLu at tyan.com
Fri Sep 26 12:00:01 CEST 2003
Stefan,
Change that to 1 seems no use.
For Tyan S2885, the 8131 and 8111 is connected to CPU0 Link2, and 8151 is
linked to CPU0 link0.
I have to manual to change src/device/hypertransport.c 's
hypertransport_scan_chain the link scan sequence from "0 to 2" to "2 to 0".
I think it works for your case to.
Regards
YH
-----邮件原件-----
发件人: Stefan Reinauer [mailto:stepan at suse.de]
发送时间: 2003年9月26日 5:19
收件人: linuxbios at clustermatic.org
主题: config tool + tree enumeration
Hi,
I have several non coherent ht devices in a chain, i.e. :
CPU0 -- CPU1 or CPU2 -- CPU3
| | |
8131 CPU0 -- CPU2
| | |
8111 8111 8131
|
8131
The links to the non coherent devices are LDT1 or LDT2, not LDT0.
Do I have to specify the "southbridges with Bus ID 1/2 then, since
it's not on the first Link, or does it have to be 0, since it's the
first south bridge?
northbridge amd/amdk8 "mc0"
pci 0:18.0
[..]
southbridge amd/amd8131 "amd8131"
pci 1:0.0
^^^^^
[..]
end
southbridge amd/amd8111 "amd8111"
pci 1:0.0
^^^^^
[..]
end
end
Stefan
--
Architecture Team
SuSE Linux AG
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list