config tool + tree enumeration
Alan Mimms
a.mimms at f5.com
Mon Sep 29 13:50:01 CEST 2003
Hello Lu,
Is there anything in CVS yet for K8 CPU support? I didn't see anything a week or so ago. The AMD folks say it's there and "production level".
?
Thanks.
Alan Mimms, Senior Architect
F5 Networks, Inc. Spokane Development Center
Liberty Lake, Washington
v: 509-343-3524 f: 509-343-3501
-----Original Message-----
From: YhLu [mailto:YhLu at tyan.com]
Sent: Monday, September 29, 2003 10:06 AM
To: ron minnich
Cc: Stefan Reinauer; Eric W. Biederman; linuxbios at clustermatic.org
Subject: Re: config tool + tree enumeration
Ron,
In s2880, If I don't change the 0 to 1. I will get two copy of bus1 devices
in the Linux. In S2885, it is OK, if I don't change it.
In Arima, You still can not see bus1 device now?
Regards
Yinghai Lu
-----邮件原件-----
发件人: ron minnich [mailto:rminnich at lanl.gov]
发送时间: 2003年9月29日 10:00
收件人: YhLu
抄送: Stefan Reinauer; Eric W. Biederman; linuxbios at clustermatic.org
主题: Re: config tool + tree enumeration
On Mon, 29 Sep 2003, YhLu wrote:
> Stefan,
>
> >It's bus 1, that LinuxBIOS and OpenBIOS
> >find really well, only Linux refuses to see it.
>
> Do you update the irq_table.c's interrupt router bus no. from to "0" to
"1"?
that's not the problem. The problem is that linux does not see bus 1 at
all.
ron
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list