v2 epia

[ron minnich]

On Mon, 29 Sep 2003, Stefan Reinauer wrote:

> * ron minnich <rminnich at lanl.gov> [030929 21:36]:
> > 
> > this is bad:
> > Read config 32 bus 1,devfn 0x0,reg 0x18,val 0xffffffff                
> > 
> > 1:0.0 register 18.l is all ffffffff. Very  bad, it should be 010100
> > 
> > Stefan, what was that about hardware bugs again?
> 
> What device is that? Can you read the rest of the registers? 
> Is the command field set to enable config space read?

my mistake, see next message.

ron