Opteron / Tyan motherboard fault on boot.
ron minnich
rminnich at lanl.gov
Thu Aug 19 21:57:00 CEST 2004
On 19 Aug 2004, Eric W. Biederman wrote:
> >
> > where the following line(s) are, in set_Trwt()...
> > if ((clocks < DTH_TRWT_MIN) || (clocks > DTH_TRWT_MAX)) {
> > die("Unknown Trwt");
> > }
> >
> > What is this, and why is it happening?
>
> I don't know the why. This bit is simply a sanity check that the information
> coming from your serial EEPROM on your dimms is fine.
I have seen this when SMBUS is broken and "clocks" is 0xff (i.e. >
DTH_TRWT_MAX). You might want to add a print here to see what the value of
clocks is.
ron
More information about the coreboot
mailing list