çå¤: K8 northbridge f1 behaviour.
Eric W. Biederman
ebiederman at lnxi.com
Thu Jan 8 23:52:01 CET 2004
Li-Ta Lo <ollie at lanl.gov> writes:
> On Thu, 2004-01-08 at 15:43, YhLu wrote:
> > Ron,
> > You need to set the REG in some special position. Because ht_scanbus, may
> > reset some regs according to it's scan result.
I know the existing code when it was back in the freebios codebase and PCI
only handled this correctly, so it should be just a matter of a little bit
of debugging to get this to happen automatically if it does not already.
> > I think the best to use VGA is
> > 1. LinuxBIOS init critical regs to make sure VGA can be used in Linux
> > kernel.
> > 2. Linux Kernel does the special work to make use some acceleration function
> > works.
> > 3. Let X Server no changes.
> We found that under normal bios, the AMD8151 is not present. Is there
> any bits to hide it ?
Hmm. This may because of how things are laid out.
I wonder if there are driver issues when you put the 8151 on something
besides bus 0.
> We have tried everything to forward VGAIO behind 8111 and 8151
> bridges but fail. Do you know anything about it ?
That is very weird. Besides the card not working what test
are you using to be certain you have failed? Are you failing
to read/write an I/O register.
It occurs to me LinuxBIOS might be different enough in pci layout to
confuse the option ROM on your card.
Plus I think there are some special bits of AGP initialization that
we might not be doing.
More information about the coreboot