List of V2 Config.lb's options
Mathieu Deschamps
mdeschamps at mangrove-systems.com
Mon May 17 09:56:01 CEST 2004
Hi,
I don't know if it could help, i've gathered every used options in
V2. It helped me because of V1 to V2 port : some options aren't used
any more (e.g. side solutions incorporated in LB becoming "standards"
needn't a activated option to be taken into consideration in build)
while some other options change their name..
It maybe miss someones.
mathieu.
--------------------------
LIST OF THE DIFFERENT OPTIONS FOUND IN CONFIG.LBs, IN *.C
(this means not all are usable into config.lb)
AUTOBOOT_CMDLINE
__BIG_ENDIAN
__BIG_ENDIAN__
CHECK_FOR_SLAVES
CONFIG_BRIQ_7400
CONFIG_BRIQ_750FX
CONFIG_CONSOLE_BTEXT
CONFIG_CONSOLE_LOGBUF
CONFIG_CONSOLE_SERIAL8250
CONFIG_CONSOLE_SROM
CONFIG_CONSOLE_VGA
CONFIG_FS_EXT2
CONFIG_FS_FAT
CONFIG_FS_ISO9660
CONFIG_FS_STREAM
CONFIG_IDE
CONFIG_IDE_STREAM
CONFIG_IOAPIC
CONFIG_LEGACY_VGABIOS
CONFIG_MAX_CPUS
CONFIG_ROM_STREAM
CONFIG_ROM_STREAM_START
CONFIG_SANDPOINT_ALTIMUS
CONFIG_SANDPOINT_GYRUS
CONFIG_SANDPOINT_TALUS
CONFIG_SANDPOINT_UNITY
CONFIG_SANDPOINT_VALIS
CONFIG_SDRAM_BANK0
CONFIG_SMP
CONFIG_UDELAY_TSC
CONFIG_USE_INIT
CPU_FIXUP
DCACHE_RAM_BASE
DCACHE_RAM_SIZE
DEBUG
DEBUG_BOOT
DEBUG_CONSOLE
DEBUG_CONSOLE_SERIAL
DEBUG_CONSOLE_VGA
DEBUG_GDB
DEBUG_SETNORTHB
DECODE
DRAM_MIN_CYCLE_TIME
E2DEBUG
ENCODE
FALLBACK_SIZE
HARD_RESET_BUS
HARD_RESET_DEVICE
HARD_RESET_FUNCTION
HAVE_ACPI_HPET
HAVE_ACPI_TABLES
HAVE_FALLBACK_BOOT
HAVE_HARD_RESET
HAVE_MP_TABLE
HAVE_OPTION_TABLE
HAVE_PIRQ_TABLE
HEAP_SIZE
IN_MODULE
INTEL_PPRO_MTRR
_IO_BASE
IRQ_SLOT_COUNT
ISA_IO_BASE
ISA_MEM_BASE
k8
LB_CKS_LOC
LB_CKS_RANGE_END
LB_CKS_RANGE_START
MAIN
MAINBOARD
MAINBOARD_PART_NUMBER
MAINBOARD_VENDOR
ONE_TRACK
PAYLOAD_SIZE
PCIC0_CFGADDR
PCIC0_CFGDATA
PNP_CFGADDR
PNP_CFGDATA
_RAMBASE
_ROMBASE
ROM_IMAGE_SIZE
ROM_SECTION_OFFSET
ROM_SECTION_SIZE
ROM_SIZE
SAFE
STACK_SIZE
SWD_BEST_OFF
TTYS0_BASE
UCL_DEBUG
USE_DCACHE_RAM
USE_FALLBACK_IMAGE
USE_OPTION_TABLE
VERBOSE
VGABIOS_START
X86EMU_FPU_PRESENT
XIP_ROM_BASE
XIP_ROM_SIZ
COMPLETE LIST OF EVERY OPTIONS USED AND THEIR EXACT LOCATIONS:
# cat options.list
Here are listed the options in the if directive in source's Config.lb
FILE LINE OPTIONS
-------------------------------------------------------
./arch/i386/boot/Config.lb 10 if HAVE_ACPI_TABLES
./arch/i386/boot/Config.lb 7 if HAVE_PIRQ_TABLE
./arch/i386/Config.lb 42 if CONFIG_SMP
./arch/i386/smp/Config.lb 4 if HAVE_MP_TABLE
./arch/i386/smp/Config.lb 8 if CONFIG_SMP
./boot/Config.lb 3 if CONFIG_FS_STREAM
./config/Config.lb 142 if HAVE_OPTION_TABLE
./console/Config.lb 12 if CONFIG_CONSOLE_BTEXT
./console/Config.lb 15 if CONFIG_CONSOLE_LOGBUF
./console/Config.lb 18 if CONFIG_CONSOLE_SROM
./console/Config.lb 24 if CONFIG_USE_INIT
./console/Config.lb 6 if CONFIG_CONSOLE_SERIAL8250
./console/Config.lb 9 if CONFIG_CONSOLE_VGA
./cpu/k8/Config.lb 9 if CPU_FIXUP
./cpu/p5/Config.lb 4 if CONFIG_UDELAY_TSC object delay_tsc.o
end
./lib/Config.lb 12 if HAVE_FALLBACK_BOOT
./lib/Config.lb 20 if CONFIG_USE_INIT
./mainboard/amd/quartet/Config.lb 125 if USE_FALLBACK_IMAGE
./mainboard/amd/quartet/Config.lb 168 if HAVE_MP_TABLE object
mptable.o end
./mainboard/amd/quartet/Config.lb 169 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/amd/quartet/Config.lb 205 if USE_FALLBACK_IMAGE
./mainboard/amd/quartet/Config.lb 232 if USE_FALLBACK_IMAGE
./mainboard/amd/solo/Config.lb 124 if USE_FALLBACK_IMAGE
./mainboard/amd/solo/Config.lb 167 if HAVE_MP_TABLE object
mptable.o end
./mainboard/amd/solo/Config.lb 168 if HAVE_PIRQ_TABLE object
irq_tables.o end
./mainboard/amd/solo/Config.lb 204 if USE_FALLBACK_IMAGE
./mainboard/amd/solo/Config.lb 231 if USE_FALLBACK_IMAGE
./mainboard/arima/hdama/Config.lb 125 if USE_FALLBACK_IMAGE
./mainboard/arima/hdama/Config.lb 168 if HAVE_MP_TABLE object
mptable.o end
./mainboard/arima/hdama/Config.lb 169 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/arima/hdama/Config.lb 205 if USE_FALLBACK_IMAGE
./mainboard/arima/hdama/Config.lb 232 if USE_FALLBACK_IMAGE
./mainboard/ibm/e325/Config.lb 125 if USE_FALLBACK_IMAGE
./mainboard/ibm/e325/Config.lb 168 if HAVE_MP_TABLE object
mptable.o end
./mainboard/ibm/e325/Config.lb 169 if HAVE_PIRQ_TABLE object
irq_tables.o end
./mainboard/ibm/e325/Config.lb 205 if USE_FALLBACK_IMAGE
./mainboard/ibm/e325/Config.lb 232 if USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8S2/Config.lb 112 if USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8S2/Config.lb 157 if HAVE_MP_TABLE object
mptable.o end
./mainboard/Iwill/DK8S2/Config.lb 158 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/Iwill/DK8S2/Config.lb 193 if USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8S2/Config.lb 220 if USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8X/Config.lb 112 if USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8X/Config.lb 157 if HAVE_MP_TABLE object
mptable.o end
./mainboard/Iwill/DK8X/Config.lb 158 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/Iwill/DK8X/Config.lb 193 if USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8X/Config.lb 220 if USE_FALLBACK_IMAGE
./mainboard/motorola/sandpoint/Config.lb 39 if
CONFIG_SANDPOINT_ALTIMUS
./mainboard/motorola/sandpoint/Config.lb 44 if
CONFIG_SANDPOINT_TALUS
./mainboard/motorola/sandpoint/Config.lb 48 if
CONFIG_SANDPOINT_UNITY
./mainboard/motorola/sandpoint/Config.lb 51 if
CONFIG_SANDPOINT_VALIS
./mainboard/motorola/sandpoint/Config.lb 54 if
CONFIG_SANDPOINT_GYRUS
./mainboard/newisys/khepri/Config.lb 125 if USE_FALLBACK_IMAGE
./mainboard/newisys/khepri/Config.lb 168 if HAVE_MP_TABLE object
mptable.o end
./mainboard/newisys/khepri/Config.lb 169 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/newisys/khepri/Config.lb 207 if USE_FALLBACK_IMAGE
./mainboard/newisys/khepri/Config.lb 234 if USE_FALLBACK_IMAGE
./mainboard/totalimpact/briq/Config.lb 36 if CONFIG_BRIQ_750FX
./mainboard/totalimpact/briq/Config.lb 39 if CONFIG_BRIQ_7400
./mainboard/tyan/s2850/Config.lb 101 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2850/Config.lb 43 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s2850/Config.lb 44 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s2850/Config.lb 65 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2850/Config.lb 88 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2880/Config.lb 41 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s2880/Config.lb 42 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s2880/Config.lb 62 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2880/Config.lb 85 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2880/Config.lb 98 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2881/Config.lb 101 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2881/Config.lb 43 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s2881/Config.lb 44 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s2881/Config.lb 65 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2881/Config.lb 88 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2882/Config.lb 41 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s2882/Config.lb 42 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s2882/Config.lb 63 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2882/Config.lb 86 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2882/Config.lb 99 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2885/Config.lb 103 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2885/Config.lb 43 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s2885/Config.lb 44 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s2885/Config.lb 67 if USE_FALLBACK_IMAGE
./mainboard/tyan/s2885/Config.lb 90 if USE_FALLBACK_IMAGE
./mainboard/tyan/s4880/Config.lb 100 if USE_FALLBACK_IMAGE
./mainboard/tyan/s4880/Config.lb 42 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s4880/Config.lb 43 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s4880/Config.lb 64 if USE_FALLBACK_IMAGE
./mainboard/tyan/s4880/Config.lb 87 if USE_FALLBACK_IMAGE
./mainboard/tyan/s4882/Config.lb 101 if USE_FALLBACK_IMAGE
./mainboard/tyan/s4882/Config.lb 43 if HAVE_MP_TABLE object
mptable.o end
./mainboard/tyan/s4882/Config.lb 44 if HAVE_PIRQ_TABLE
object irq_tables.o end
./mainboard/tyan/s4882/Config.lb 65 if USE_FALLBACK_IMAGE
./mainboard/tyan/s4882/Config.lb 88 if USE_FALLBACK_IMAGE
./mainboard/via/epia/Config.lb 162 if USE_FALLBACK_IMAGE
./mainboard/via/epia/Config.lb 189 if USE_FALLBACK_IMAGE
./mainboard/via/epia/Config.lb 84 if USE_FALLBACK_IMAGE
./pc80/Config.lb 14 if CONFIG_IDE
./pc80/Config.lb 20 if CONFIG_LEGACY_VGABIOS
./stream/Config.lb 10 if CONFIG_IDE_STREAM
./stream/Config.lb 15 if CONFIG_FS_STREAM
./stream/Config.lb 6 if CONFIG_ROM_STREAM
./stream/fs/Config.lb 12 if CONFIG_FS_ISO9660
./stream/fs/Config.lb 16 if CONFIG_FS_FAT
./stream/fs/Config.lb 8 if CONFIG_FS_EXT2
Here are listed the options in the uses directive in source's Config.lb
-------------------------------------------------------------------------
FILE LINE OPTIONS
-------------------------------------------------------
./arch/i386/boot/Config.lb 1 uses HAVE_PIRQ_TABLE
./arch/i386/boot/Config.lb 2 uses HAVE_ACPI_TABLES
./arch/i386/Config.lb 1 uses CONFIG_SMP
./arch/i386/smp/Config.lb 1 uses HAVE_MP_TABLE
./arch/i386/smp/Config.lb 2 uses CONFIG_SMP
./config/Config.lb 3 uses HAVE_OPTION_TABLE
./console/Config.lb 1 uses CONFIG_CONSOLE_SERIAL8250
CONFIG_CONSOLE_VGA CONFIG_CONSOLE_BTEXT
./console/Config.lb 2 uses CONFIG_CONSOLE_LOGBUF
CONFIG_CONSOLE_SROM
./console/Config.lb 3 uses CONFIG_USE_INIT
./cpu/k7/Config.lb 1 uses k7
./cpu/k7/Config.lb 2 uses CPU_FIXUP
./cpu/k8/Config.lb 4 uses k8
./cpu/k8/Config.lb 5 uses CPU_FIXUP
./cpu/p5/Config.lb 1 uses CONFIG_UDELAY_TSC
./cpu/p6/Config.lb 1 uses INTEL_PPRO_MTRR
./cpu/ppc/mpc74xx/Config.lb 4 uses _RAMBASE
./cpu/ppc/mpc74xx/Config.lb 5 uses USE_DCACHE_RAM
./cpu/ppc/mpc74xx/Config.lb 6 uses DCACHE_RAM_BASE
./cpu/ppc/mpc74xx/Config.lb 7 uses DCACHE_RAM_SIZE
./cpu/ppc/ppc4xx/Config.lb 4 uses _RAMBASE
./cpu/ppc/ppc4xx/Config.lb 5 uses USE_DCACHE_RAM
./cpu/ppc/ppc4xx/Config.lb 6 uses DCACHE_RAM_BASE
./cpu/ppc/ppc4xx/Config.lb 7 uses DCACHE_RAM_SIZE
./cpu/ppc/ppc7xx/Config.lb 4 uses _RAMBASE
./cpu/ppc/ppc7xx/Config.lb 5 uses USE_DCACHE_RAM
./cpu/ppc/ppc7xx/Config.lb 6 uses DCACHE_RAM_BASE
./cpu/ppc/ppc7xx/Config.lb 7 uses DCACHE_RAM_SIZE
./lib/Config.lb 1 uses HAVE_FALLBACK_BOOT
./lib/Config.lb 2 uses CONFIG_USE_INIT
./mainboard/amd/quartet/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/amd/quartet/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/amd/quartet/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/amd/quartet/Config.lb 13 uses CONFIG_SMP
./mainboard/amd/quartet/Config.lb 14 uses FALLBACK_SIZE
./mainboard/amd/quartet/Config.lb 15 uses ROM_SIZE
./mainboard/amd/quartet/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/amd/quartet/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/amd/quartet/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/amd/quartet/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/amd/quartet/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/amd/quartet/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/amd/quartet/Config.lb 21 uses
CONFIG_ROM_STREAM_START
./mainboard/amd/quartet/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/amd/quartet/Config.lb 23 uses _ROMBASE
./mainboard/amd/quartet/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/amd/quartet/Config.lb 25 uses XIP_ROM_BASE
./mainboard/amd/quartet/Config.lb 26 uses STACK_SIZE
./mainboard/amd/quartet/Config.lb 27 uses HEAP_SIZE
./mainboard/amd/quartet/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/amd/quartet/Config.lb 29 uses LB_CKS_RANGE_START
./mainboard/amd/quartet/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/amd/quartet/Config.lb 30 uses LB_CKS_RANGE_END
./mainboard/amd/quartet/Config.lb 31 uses LB_CKS_LOC
./mainboard/amd/quartet/Config.lb 32 uses
MAINBOARD_PART_NUMBER
./mainboard/amd/quartet/Config.lb 33 uses MAINBOARD_VENDOR
./mainboard/amd/quartet/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/amd/quartet/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/amd/quartet/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/amd/quartet/Config.lb 6 uses HARD_RESET_BUS
./mainboard/amd/quartet/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/amd/quartet/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/amd/quartet/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/amd/solo/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/amd/solo/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/amd/solo/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/amd/solo/Config.lb 13 uses CONFIG_SMP
./mainboard/amd/solo/Config.lb 14 uses FALLBACK_SIZE
./mainboard/amd/solo/Config.lb 15 uses ROM_SIZE
./mainboard/amd/solo/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/amd/solo/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/amd/solo/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/amd/solo/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/amd/solo/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/amd/solo/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/amd/solo/Config.lb 21 uses CONFIG_ROM_STREAM_START
./mainboard/amd/solo/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/amd/solo/Config.lb 23 uses _ROMBASE
./mainboard/amd/solo/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/amd/solo/Config.lb 25 uses XIP_ROM_BASE
./mainboard/amd/solo/Config.lb 26 uses STACK_SIZE
./mainboard/amd/solo/Config.lb 27 uses HEAP_SIZE
./mainboard/amd/solo/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/amd/solo/Config.lb 29 uses LB_CKS_RANGE_START
./mainboard/amd/solo/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/amd/solo/Config.lb 30 uses LB_CKS_RANGE_END
./mainboard/amd/solo/Config.lb 31 uses LB_CKS_LOC
./mainboard/amd/solo/Config.lb 32 uses MAINBOARD_PART_NUMBER
./mainboard/amd/solo/Config.lb 33 uses MAINBOARD_VENDOR
./mainboard/amd/solo/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/amd/solo/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/amd/solo/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/amd/solo/Config.lb 6 uses HARD_RESET_BUS
./mainboard/amd/solo/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/amd/solo/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/amd/solo/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/arima/hdama/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/arima/hdama/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/arima/hdama/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/arima/hdama/Config.lb 13 uses CONFIG_SMP
./mainboard/arima/hdama/Config.lb 14 uses FALLBACK_SIZE
./mainboard/arima/hdama/Config.lb 15 uses ROM_SIZE
./mainboard/arima/hdama/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/arima/hdama/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/arima/hdama/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/arima/hdama/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/arima/hdama/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/arima/hdama/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/arima/hdama/Config.lb 21 uses
CONFIG_ROM_STREAM_START
./mainboard/arima/hdama/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/arima/hdama/Config.lb 23 uses _ROMBASE
./mainboard/arima/hdama/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/arima/hdama/Config.lb 25 uses XIP_ROM_BASE
./mainboard/arima/hdama/Config.lb 26 uses STACK_SIZE
./mainboard/arima/hdama/Config.lb 27 uses HEAP_SIZE
./mainboard/arima/hdama/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/arima/hdama/Config.lb 29 uses LB_CKS_RANGE_START
./mainboard/arima/hdama/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/arima/hdama/Config.lb 30 uses LB_CKS_RANGE_END
./mainboard/arima/hdama/Config.lb 31 uses LB_CKS_LOC
./mainboard/arima/hdama/Config.lb 32 uses
MAINBOARD_PART_NUMBER
./mainboard/arima/hdama/Config.lb 33 uses MAINBOARD_VENDOR
./mainboard/arima/hdama/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/arima/hdama/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/arima/hdama/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/arima/hdama/Config.lb 6 uses HARD_RESET_BUS
./mainboard/arima/hdama/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/arima/hdama/Config.lb 6 uses HARD_RESET_BUS
./mainboard/arima/hdama/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/arima/hdama/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/arima/hdama/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/embeddedplanet/ep405pc/Config.lb 10 uses _IO_BASE
./mainboard/embeddedplanet/ep405pc/Config.lb 5 uses
PCIC0_CFGADDR
./mainboard/embeddedplanet/ep405pc/Config.lb 6 uses
PCIC0_CFGDATA
./mainboard/embeddedplanet/ep405pc/Config.lb 7 uses ISA_IO_BASE
./mainboard/embeddedplanet/ep405pc/Config.lb 8 uses
ISA_MEM_BASE
./mainboard/embeddedplanet/ep405pc/Config.lb 9 uses TTYS0_BASE
./mainboard/ibm/e325/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/ibm/e325/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/ibm/e325/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/ibm/e325/Config.lb 13 uses CONFIG_SMP
./mainboard/ibm/e325/Config.lb 14 uses FALLBACK_SIZE
./mainboard/ibm/e325/Config.lb 15 uses ROM_SIZE
./mainboard/ibm/e325/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/ibm/e325/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/ibm/e325/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/ibm/e325/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/ibm/e325/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/ibm/e325/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/ibm/e325/Config.lb 21 uses CONFIG_ROM_STREAM_START
./mainboard/ibm/e325/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/ibm/e325/Config.lb 23 uses _ROMBASE
./mainboard/ibm/e325/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/ibm/e325/Config.lb 25 uses XIP_ROM_BASE
./mainboard/ibm/e325/Config.lb 26 uses STACK_SIZE
./mainboard/ibm/e325/Config.lb 27 uses HEAP_SIZE
./mainboard/ibm/e325/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/ibm/e325/Config.lb 29 uses LB_CKS_RANGE_START
./mainboard/ibm/e325/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/ibm/e325/Config.lb 30 uses LB_CKS_RANGE_END
./mainboard/ibm/e325/Config.lb 31 uses LB_CKS_LOC
./mainboard/ibm/e325/Config.lb 32 uses MAINBOARD_PART_NUMBER
./mainboard/ibm/e325/Config.lb 33 uses MAINBOARD_VENDOR
./mainboard/ibm/e325/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/ibm/e325/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/ibm/e325/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/ibm/e325/Config.lb 6 uses HARD_RESET_BUS
./mainboard/ibm/e325/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/ibm/e325/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/ibm/e325/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/Iwill/DK8S2/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/Iwill/DK8S2/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/Iwill/DK8S2/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/Iwill/DK8S2/Config.lb 13 uses CONFIG_SMP
./mainboard/Iwill/DK8S2/Config.lb 14 uses FALLBACK_SIZE
./mainboard/Iwill/DK8S2/Config.lb 15 uses ROM_SIZE
./mainboard/Iwill/DK8S2/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/Iwill/DK8S2/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/Iwill/DK8S2/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/Iwill/DK8S2/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/Iwill/DK8S2/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/Iwill/DK8S2/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/Iwill/DK8S2/Config.lb 21 uses
CONFIG_ROM_STREAM_START
./mainboard/Iwill/DK8S2/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/Iwill/DK8S2/Config.lb 23 uses _ROMBASE
./mainboard/Iwill/DK8S2/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/Iwill/DK8S2/Config.lb 25 uses XIP_ROM_BASE
./mainboard/Iwill/DK8S2/Config.lb 26 uses STACK_SIZE
./mainboard/Iwill/DK8S2/Config.lb 27 uses HEAP_SIZE
./mainboard/Iwill/DK8S2/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/Iwill/DK8S2/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/Iwill/DK8S2/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8S2/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/Iwill/DK8S2/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/Iwill/DK8S2/Config.lb 6 uses HARD_RESET_BUS
./mainboard/Iwill/DK8S2/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/Iwill/DK8S2/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/Iwill/DK8S2/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/Iwill/DK8X/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/Iwill/DK8X/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/Iwill/DK8X/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/Iwill/DK8X/Config.lb 13 uses CONFIG_SMP
./mainboard/Iwill/DK8X/Config.lb 14 uses FALLBACK_SIZE
./mainboard/Iwill/DK8X/Config.lb 15 uses ROM_SIZE
./mainboard/Iwill/DK8X/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/Iwill/DK8X/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/Iwill/DK8X/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/Iwill/DK8X/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/Iwill/DK8X/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/Iwill/DK8X/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/Iwill/DK8X/Config.lb 21 uses
CONFIG_ROM_STREAM_START
./mainboard/Iwill/DK8X/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/Iwill/DK8X/Config.lb 23 uses _ROMBASE
./mainboard/Iwill/DK8X/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/Iwill/DK8X/Config.lb 25 uses XIP_ROM_BASE
./mainboard/Iwill/DK8X/Config.lb 26 uses STACK_SIZE
./mainboard/Iwill/DK8X/Config.lb 27 uses HEAP_SIZE
./mainboard/Iwill/DK8X/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/Iwill/DK8X/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/Iwill/DK8X/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/Iwill/DK8X/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/Iwill/DK8X/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/Iwill/DK8X/Config.lb 6 uses HARD_RESET_BUS
./mainboard/Iwill/DK8X/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/Iwill/DK8X/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/Iwill/DK8X/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/motorola/sandpoint/Config.lb 10 uses ISA_IO_BASE
./mainboard/motorola/sandpoint/Config.lb 11 uses
ISA_MEM_BASE
./mainboard/motorola/sandpoint/Config.lb 12 uses
PCIC0_CFGADDR
./mainboard/motorola/sandpoint/Config.lb 13 uses
PCIC0_CFGDATA
./mainboard/motorola/sandpoint/Config.lb 14 uses PNP_CFGADDR
./mainboard/motorola/sandpoint/Config.lb 15 uses PNP_CFGDATA
./mainboard/motorola/sandpoint/Config.lb 16 uses _IO_BASE
./mainboard/motorola/sandpoint/Config.lb 5 uses
CONFIG_SANDPOINT_ALTIMUS
./mainboard/motorola/sandpoint/Config.lb 6 uses
CONFIG_SANDPOINT_TALUS
./mainboard/motorola/sandpoint/Config.lb 7 uses
CONFIG_SANDPOINT_UNITY
./mainboard/motorola/sandpoint/Config.lb 8 uses
CONFIG_SANDPOINT_VALIS
./mainboard/motorola/sandpoint/Config.lb 9 uses
CONFIG_SANDPOINT_GYRUS
./mainboard/newisys/khepri/Config.lb 10 uses HAVE_OPTION_TABLE
./mainboard/newisys/khepri/Config.lb 11 uses CONFIG_MAX_CPUS
./mainboard/newisys/khepri/Config.lb 12 uses CONFIG_IOAPIC
./mainboard/newisys/khepri/Config.lb 13 uses CONFIG_SMP
./mainboard/newisys/khepri/Config.lb 14 uses FALLBACK_SIZE
./mainboard/newisys/khepri/Config.lb 15 uses ROM_SIZE
./mainboard/newisys/khepri/Config.lb 16 uses ROM_SECTION_SIZE
./mainboard/newisys/khepri/Config.lb 17 uses ROM_IMAGE_SIZE
./mainboard/newisys/khepri/Config.lb 18 uses ROM_SECTION_SIZE
./mainboard/newisys/khepri/Config.lb 19 uses ROM_SECTION_OFFSET
./mainboard/newisys/khepri/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/newisys/khepri/Config.lb 20 uses CONFIG_ROM_STREAM
./mainboard/newisys/khepri/Config.lb 21 uses
CONFIG_ROM_STREAM_START
./mainboard/newisys/khepri/Config.lb 22 uses PAYLOAD_SIZE
./mainboard/newisys/khepri/Config.lb 23 uses _ROMBASE
./mainboard/newisys/khepri/Config.lb 24 uses XIP_ROM_SIZE
./mainboard/newisys/khepri/Config.lb 25 uses XIP_ROM_BASE
./mainboard/newisys/khepri/Config.lb 26 uses STACK_SIZE
./mainboard/newisys/khepri/Config.lb 27 uses HEAP_SIZE
./mainboard/newisys/khepri/Config.lb 28 uses USE_OPTION_TABLE
./mainboard/newisys/khepri/Config.lb 29 uses LB_CKS_RANGE_START
./mainboard/newisys/khepri/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/newisys/khepri/Config.lb 30 uses LB_CKS_RANGE_END
./mainboard/newisys/khepri/Config.lb 31 uses LB_CKS_LOC
./mainboard/newisys/khepri/Config.lb 32 uses
MAINBOARD_PART_NUMBER
./mainboard/newisys/khepri/Config.lb 33 uses MAINBOARD_VENDOR
./mainboard/newisys/khepri/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/newisys/khepri/Config.lb 4 uses HAVE_FALLBACK_BOOT
./mainboard/newisys/khepri/Config.lb 5 uses HAVE_HARD_RESET
./mainboard/newisys/khepri/Config.lb 6 uses HARD_RESET_BUS
./mainboard/newisys/khepri/Config.lb 7 uses HARD_RESET_DEVICE
./mainboard/newisys/khepri/Config.lb 8 uses HARD_RESET_FUNCTION
./mainboard/newisys/khepri/Config.lb 9 uses IRQ_SLOT_COUNT
./mainboard/totalimpact/briq/Config.lb 5 uses PCIC0_CFGADDR
./mainboard/totalimpact/briq/Config.lb 6 uses PCIC0_CFGDATA
./mainboard/totalimpact/briq/Config.lb 7 uses TTYS0_BASE
./mainboard/totalimpact/briq/Config.lb 8 uses CONFIG_BRIQ_750FX
./mainboard/totalimpact/briq/Config.lb 9 uses CONFIG_BRIQ_7400
./mainboard/tyan/s2850/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s2850/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s2850/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s2850/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s2850/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s2850/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s2850/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s2850/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s2850/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s2850/Config.lb 8 uses ARCH
./mainboard/tyan/s2850/Config.lb 9 uses HARD_RESET_BUS
./mainboard/tyan/s2880/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s2880/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s2880/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s2880/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s2880/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s2880/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s2880/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s2880/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s2880/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s2880/Config.lb 8 uses ARCH
./mainboard/tyan/s2880/Config.lb 9 uses HARD_RESET_BUS
./mainboard/tyan/s2881/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s2881/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s2881/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s2881/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s2881/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s2881/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s2881/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s2881/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s2881/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s2881/Config.lb 8 uses ARCH
./mainboard/tyan/s2881/Config.lb 9 uses HARD_RESET_BUS
./mainboard/tyan/s2882/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s2882/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s2882/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s2882/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s2882/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s2882/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s2882/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s2882/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s2882/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s2882/Config.lb 8 uses ARCH
./mainboard/tyan/s2882/Config.lb 9 uses HARD_RESET_BUS
./mainboard/tyan/s2885/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s2885/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s2885/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s2885/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s2885/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s2885/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s2885/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s2885/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s2885/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s2885/Config.lb 8 uses ARCH
./mainboard/tyan/s2885/Config.lb 9 uses HARD_RESET_BUS
./mainboard/tyan/s4880/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s4880/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s4880/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s4880/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s4880/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s4880/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s4880/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s4880/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s4880/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s4880/Config.lb 8 uses ARCH
./mainboard/tyan/s4880/Config.lb 9 uses HARD_RESET_BUS
./mainboard/tyan/s4882/Config.lb 10 uses HARD_RESET_DEVICE
./mainboard/tyan/s4882/Config.lb 11 uses HARD_RESET_FUNCTION
./mainboard/tyan/s4882/Config.lb 1 uses HAVE_MP_TABLE
./mainboard/tyan/s4882/Config.lb 2 uses HAVE_PIRQ_TABLE
./mainboard/tyan/s4882/Config.lb 3 uses USE_FALLBACK_IMAGE
./mainboard/tyan/s4882/Config.lb 4 uses LB_CKS_RANGE_START
./mainboard/tyan/s4882/Config.lb 5 uses LB_CKS_RANGE_END
./mainboard/tyan/s4882/Config.lb 6 uses LB_CKS_LOC
./mainboard/tyan/s4882/Config.lb 7 uses MAINBOARD
./mainboard/tyan/s4882/Config.lb 8 uses ARCH
./mainboard/tyan/s4882/Config.lb 9 uses HARD_RESET_BUS
./mainboard/via/epia/Config.lb 10 uses HAVE_FALLBACK_BOOT
./mainboard/via/epia/Config.lb 11 uses HAVE_HARD_RESET
./mainboard/via/epia/Config.lb 12 uses HAVE_OPTION_TABLE
./mainboard/via/epia/Config.lb 13 uses USE_OPTION_TABLE
./mainboard/via/epia/Config.lb 14 uses CONFIG_ROM_STREAM
./mainboard/via/epia/Config.lb 15 uses IRQ_SLOT_COUNT
./mainboard/via/epia/Config.lb 16 uses MAINBOARD
./mainboard/via/epia/Config.lb 17 uses ARCH
./mainboard/via/epia/Config.lb 18 uses FALLBACK_SIZE
./mainboard/via/epia/Config.lb 19 uses STACK_SIZE
./mainboard/via/epia/Config.lb 20 uses HEAP_SIZE
./mainboard/via/epia/Config.lb 21 uses ROM_SIZE
./mainboard/via/epia/Config.lb 22 uses ROM_SECTION_SIZE
./mainboard/via/epia/Config.lb 23 uses ROM_IMAGE_SIZE
./mainboard/via/epia/Config.lb 24 uses ROM_SECTION_SIZE
./mainboard/via/epia/Config.lb 25 uses ROM_SECTION_OFFSET
./mainboard/via/epia/Config.lb 26 uses CONFIG_ROM_STREAM_START
./mainboard/via/epia/Config.lb 27 uses PAYLOAD_SIZE
./mainboard/via/epia/Config.lb 28 uses _ROMBASE
./mainboard/via/epia/Config.lb 29 uses XIP_ROM_SIZE
./mainboard/via/epia/Config.lb 30 uses XIP_ROM_BASE
./mainboard/via/epia/Config.lb 31 uses HAVE_MP_TABLE
./mainboard/via/epia/Config.lb 7 uses HAVE_MP_TABLE
./mainboard/via/epia/Config.lb 8 uses HAVE_PIRQ_TABLE
./mainboard/via/epia/Config.lb 9 uses USE_FALLBACK_IMAGE
./pc80/Config.lb 1 uses CONFIG_IDE
./pc80/Config.lb 2 uses CONFIG_LEGACY_VGABIOS
./stream/Config.lb 1 uses CONFIG_ROM_STREAM
./stream/Config.lb 2 uses CONFIG_IDE_STREAM
./stream/Config.lb 3 uses CONFIG_FS_STREAM
./stream/Config.lb 4 uses CONFIG_IDE
./stream/fs/Config.lb 1 uses CONFIG_FS_EXT2
./stream/fs/Config.lb 2 uses CONFIG_FS_ISO9660
./stream/fs/Config.lb 3 uses CONFIG_FS_FAT
More information about the coreboot
mailing list