4G 4 Rank memory module

Stefan Reinauer stepan at openbios.org
Tue Nov 23 14:35:01 CET 2004


* YhLu <YhLu at tyan.com> [041123 22:04]:
> 2G modules for CPU0

It seems to dislike the 2G Modules it seems..? Can you try with only the
4G modules?


> 4G modules for CPU1.
> 
> -----Original Message-----
> From: Stefan Reinauer [mailto:stepan at openbios.org] 
> Sent: Tuesday, November 23, 2004 12:56 PM
> To: YhLu
> Cc: 'Eric W. Biederman'; 'LinuxBIOS'
> Subject: Re: 4G 4 Rank memory module
> 
> * YhLu <YhLu at tyan.com> [041123 20:51]:
> > Ram2.00
> > rows: 0x0000000d 
> > columns: 0x0000000c 
> > banks: 0x00000004 
> > module data width : 0x00000048 
> > side2 banks: 0x00000002 
> 
> > Ram2.01
> > rows: 0x0000000d 
> > columns: 0x0000000c 
> > banks: 0x00000004 
> > module data width : 0x00000048 
> > side2 banks: 0x00000004 
> > Bad SPD value
> > 
> > CPU0 got 2G modules
> > CPU1 got 4G modules
> > Side2 banks is different.
>  
> Is this with two different modules? Ram2.00 Shows a difference.
> Maybe noise on the I2C bus? Ram2.01 seems to be ok..?!?
> 
> Stefan
> 



More information about the coreboot mailing list