Makefile changes for symbols
Dave Aubin
daubin at actuality-systems.com
Wed Oct 20 07:45:01 CEST 2004
Hi Steve,
Nice to hear someone else in the northeast is using lb:)
Methods we use to do linux bios debugging:
1. Serial
2. netconsole (same as serial but over ethernet)
3. Hardware Emulator with debugger
4. Toggling leds at certain places (i.e. like printfs for leds;)
-----Original Message-----
From: linuxbios-admin at clustermatic.org
[mailto:linuxbios-admin at clustermatic.org] On Behalf Of
Stephen.Kimball at bench.com
Sent: Wednesday, October 20, 2004 8:29 AM
To: rminnich at lanl.gov
Cc: linuxbios at clustermatic.org
Subject: RE: Makefile changes for symbols
Ron,
Is LinuxBIOS development done with only serial port debug messages?
You guys are good.
Steve
-----Original Message-----
From: Ronald G. Minnich [mailto:rminnich at lanl.gov]
Sent: Tuesday, October 19, 2004 5:25 PM
To: Kimball, Stephen
Cc: linuxbios at clustermatic.org
Subject: Re: Makefile changes for symbols
On Tue, 19 Oct 2004 Stephen.Kimball at bench.com wrote:
>
> Someone must have some experience with source code level debugging of
> LinuxBIOS with an American Arium ECM-50. Thanks.
wow! I want to hear about that when you get it going. Another FAQ entry.
ron
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list