building romimage for tyan s2850 mainboard
sagivy at 3vium.com
Sun Sep 12 04:27:01 CEST 2004
I am trying to build and run a romimage for tyan s2850:
Superio : w83627hf
It looks like the default mainboard configuration.
In order to start I wanted to build only the normal image. Only to see
some output in the console.
I made the following changes in Config.lb:
* put the romimage "fallback" statement in comment.
* FALLBACK_SIZE =0.
* HAVE_FALLBACK_BOOT = 0
* remove "fallback from build: buildrom ./linuxbios.rom ROM_SIZE
* Use filo boot.
I built the romimage, burn it and the console doesn't show output.
The problem is not in the cable.
What am I doing wrong ?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot