[LinuxBIOS] AMD board support

[yhlu]

It was there, and after comment out buffer checking in raminit.c, it
could work with one DIMM installed.

the ck804 pro should be superset of ultra.

YH

On 8/16/05, Jeremy Jackson <jerj at coplanar.net> wrote:
> yhlu wrote:
> 
> >S2865 support athlon64 instead of Opteron.
> >
> >athlon64 doesn't support ECC.
> >
> >I have tried to comment out lines in raminit.c and could boot the
> >system with LinuxBIOS.
> >
> >the problem are
> >1. it only supports one DIMM ...?
> >2. Etherboot support 5721 may still have problem, Tim already put sth
> >to support 5721 in Etherboot but have no time to verify that.
> >
> >YH
> >
> >
> I would be very interested to know if this board will become supported
> soon.    I know nVidia can be difficult to deal with.  In particular I
> would like to use this board with Linuxbios and boot from SATA.
> 
> I am also confused by the chipset name - nForce4 Ultra - is that the
> same as CK8-04?
> 
> Regards,
> 
> Jeremy
>