[LinuxBIOS] A boot problem....

[yhlu]

1. use latest kernel.
2. problem could be still with LinuxBIOS stage.

YH

On 7/26/05, Huang-Jen Wang <huangjen.wang at gmail.com> wrote:
> Dear all,
> My linuxbios tried to boot the linux...but has a problem..hope you can
> give me some advice...thanks....the message is follow:
> .....
> ollect_sys_info: 00000000000c0000-00000
> pci_init: 01:02.0 1166:0130 0604 00
> pci_init: 01:03.0 1166:0132 0604 00nt addr 0x1258e0 size 0x48 offset 0
> pci_init: 01:04.0 1166:0132 0604 00
> pci_init: 01:05.0 1166:0132 0604 00n PT_LOAD segment
> pci_init: 01:06.0 1166:0132 0604 000000000000100000 memsz: 0x000000000
> pci_init: 01:07.0 1166:0036 0604 00
> pci_init: 01:09.0 1166:0223 0c03 10
> pci_init: 01:09.1 1166:0223 0c03 10
> 00000000000048
> pci_init: 01:09.2 1166:0223 0c03 20
> FILO
> pci_init: 02:06.0 1000:0030 0100 00domain) Fri Jul 22 19:47:38 CST 200
> pci_init: 03:04.0 14e4:1668 0200 00
> pci_init: 03:04.1 14e4:1668 0200 000xe1fb007
> pci_init: 08:0d.0 1166:0104 0604 00ebx = 0x1ffe9420
> Press <Enter> for default boot, or <Esc> for boot prompt... timed out
> collect_linuxbios_info: Searching for L
> boot: hda1:/vmlinuz-2.4.20-8 root=/dev/hda2 console=tty0
> console=ttyS0,115200nd_lb_table: Found canidate at: 00000500
> collect_linuxbios_info: Found LinuxBIOS tabl
> find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
> convert_memmap: 0x000000000000
> ide_software_reset: Waiting for ide0 to become ready for reset... ok
> convert_memmap: 0x00000000000de0 0x0000000009f220 1
> init_drive: Testing for hda
> convert_memmap
> init_drive: Probing for hda0030000 1
> init_drive: LBA mode, sectors=12672450rt_memmap: 0x000000000f0000 0x00000000
> init_drive: Init device params... ok
> init_drive: Probing for hdb
> print_status: IDE: status=0x0, err=0x0
> Mounted ext2fs
> Found Linux version 2.4.20-8 (bhcompile at stripples.devel.redhat.com) #1 Thu Mar 1
> 3 17:18:24 EST 2003 bzImage.
> Loading kernel... ok
> Jumping to entry point...
> Linux version 2.4.20-8 (bhcompile at stripples.devel.redhat.com) (gcc version 3.2.2
>  20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000de0 - 00000000000a0000 (usable)
>  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
> 0MB HIGHMEM available.
> 512MB LOWMEM available.
> hm, page 00000000 reserved twice.
> On node 0 totalpages: 131072
> zone(0): 4096 pages.
> zone(1): 126976 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/hda2 console=tty0 console=ttyS0,115200
> Initializing CPU#0
> Detected 1995.061 MHz processor.
> Console: colour dummy device 80x25
> Calibrating delay loop...
> 
> _______________________________________________
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
>