[LinuxBIOS] Via Epia ML5000, LinuxBios, Filo -- 99 % there, need help with last 1%!
Stefan Reinauer
stepan at coresystems.de
Wed Apr 19 01:10:07 CEST 2006
Hi Eric,
> I've gotten LinuxBIOS working without much of a hitch, but I'm trying to get
> the VGA console working. I've been looking through the email archives without
> much success, then I found this page:
[..]
> device pci 9.0 on # PCI
[..]
> Is PCI 9.0 the correct value for the Via Epia-M onboard CLE266 video? Is there
> a way to find out, such as lspci?
Can you send a LinuxBIOS boot log to the list? So someone with a working Epia
can compare this.
> What about the "rom_address" field -- Can someone explain what this is, and how
> to set it properly?
It's the physical address to the gfx bios image. If you want LinuxBIOS
to initialize VGA, you need to grad this rom image from a legacy bios
and pack it in front of the LinuxBIOS image.
Stefan
--
coresystems GmbH · Brahmsstr. 16 · D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 · Fax: +49 761 7664613
Email: info at coresystems.de · http://www.coresystems.de/
More information about the coreboot
mailing list